SureFire

Kit Badger – 8.6 Creedmoor & The Fix by Q

Kit Badger goes over the new 8.6 Creedmoor, essentially the big brother to the 300 Blackout. The platform is The Fix by Q.

To read the rest of the story, visit kitbadger.com/8-6-creedmoor-the-fix-by-q

Tags: ,

15 Responses to “Kit Badger – 8.6 Creedmoor & The Fix by Q”

  1. J Rich says:

    Too bad the .375 Raptor based on the .308 case seems DOA

  2. J Rich says:

    Cool to see stuff like this coming for the Creedmoor cases, hoping ammo cost keeps creeping down for 6.5 C

  3. G-Dog says:

    Is it just me or does the 8.6 Creedmore just sound like a newer/fancier name/refresh of the 338 Federal? The fix looks like a great gun.

    • Kris says:

      I was thinking the same thing. Guess the marketing department figured adding the creedmore name would help it be a success.

      • Probably Hornady’s way of taking Federal’s good idea and capitalizing on it’s lack of success. Come to think of it, it’s kind of what they did with the .260 Rem.

        I mean, if it gets more people to realize that rifles don’t just jump from .30 cal to .50 with no stops in between, then I’m all for it.

      • Kit Badger says:

        No, while similar, it isn’t the same. It has to do with largely with subsonic rounds. To quote Ethan, a engineer from Q…

        “Main point: 300gr+ subsonic ogive is in past the case mouth of 338 Federal. 8.6 Creedmoor blends sub and super like 300 blk, but in ar10 mags for real 400m supersonic performance w/supersonic.”

    • Ethan Michel Lessard says:

      It is real close, but 338 Federal was origianlly intended for a 16″+ barrel supersonic only. 338 Fed has no real subsonic option. 285+gr bullets put the ogive inside the case mouth of 338 federal at SAAMI max OAL for subsonic, plus the standard SAAMI twist is only 1:10. 8.6 CM will be much faster than that.

  4. MudgeSmash says:

    One of the big reasons .338 Federal isn’t more popular is its name. It is a stellar 0-400 yard cartridge.

    • Ethan Michel Lessard says:

      a 16″ 338 Fed will smoke 18-20″ 308 Win 0-300m in most meaningful metrics.

    • CallMeShooter says:

      And the fact that it is a largely inaccurate cartridge. Great idea with subpar accuracy. I’m betting the 8.6 Creedmoor will not have those issues. Can’t wait for a pistol Fix in an 8.6 CM.

  5. 6.8 pumper says:

    Ivan, where did you get the Snatchsquatch t-shirt? That one makes me giggle…

  6. Brando says:

    Take it a step further and move up to 12.7x48mm. You take worn out .338LM brass, cut it down a bit past the shoulder, remove the taper and turn a thin neck on it. Result: 650gr bullet at subsonic velocity (hits as hard at 100m as 175gr .308WIN supersonic). I ran one for years in NZ – great for dropping hogs.

    • GGunner3 says:

      Hi, Brando,

      Could you give me some more specs on this cartridge and load? I’m very interested. Thanks!

      GGunner3

    • Rowan says:

      You mean essentially a .510 Whisper, right?