TYR Tactical

Finally Available, The Magpul Pro 700 Chassis

Magpul has just announced the release of limited quantities and styles of their highly anticipated Pro 700. Specifically, the folding stock variant in Black.

A lot of work has gone into this thing. In fact, four years worth. The Pro 700 is a precision  rifle  chassis  for  short  action  Remington 700  actions  and  other Remington 700  footprint  actions.

It is based  on  a  full  billet  aluminum  skeleton,  covered in polymer. It is also fully  ambidextrous.  As Magpul claims, “lefties”  haven’t  been  “left  out.” It accommodates  both  right  and  left-handed  actions  with  the  simple  swap  of  a  bolt-cutout  plate,  and  features  a  reversible  cheek  riser  and  reversible  hinge  on  the  folding  version.

Features:
•Type III hard anodized machined 6061-T6 billet aluminum V-bedding block, body, adjustment knobs and forend with high strength injection molded polymer body covers optimally placed for comfort and aesthetics
• Ambidextrous bedding block can be changed by swapping the QD sling swivel plate and bolt retainer insert for left or right hand actions using a 1/8” hex wrench
• Folding stock with push-button activated durable cast 4140 steel hinge with Melonite® finish is reversible for left or right folding capability with the use of a 5/32” hex wrench. A fixed stock adapter is available for a non-folding stock solution
• Folding stock is also designed to avoid interference with the bolt handle when folded and is compatible with a large variety of aftermarket bolt knobs and handles• An NVD clip on mounting rail solution is available• Overall LOP adjustment range is 13.25” – 15.125”
• Butt pad height can be adjusted up 1.33” and down .90” and is adjustable left or right for a total of 5 degrees
• Comb height adjustment has a 1” range with a secondary locking knob to eliminate movement in the cheek riser
• Cheek riser features a 3-position fore/aft adjustment of +.375”, 0” and -.375” which can also be changed for left or right side usage using only a common hex wrench
• Injection molded polymer grip with 5 degree forward edge sweep and enlarged palm swell with 7 degree aft edge sweep for enhanced user comfort combined with a .75” fore/aft adjustment range using a common hex wrench
• Additional grip option included with a more aggressive sweep and enlarged palm swell for the shooter that is more inclined to a less vertical grip interface (8 degree forward / 20 degree aft edge sweep)
• Durable cast steel rotation limited QD sling swivel mounts with Melonite® finish fits up to 1.5” push button swivels
• M-LOK® slots for accessory mounting on the forend (left-6/right-6/bottom-7) and the stock (bottom-2)
• Integrated AICS pattern magazine well of reinforced polymer construction optimized for PMAG® 5 & PMAG® 10 7.62 AC™ magazines as well as most other AICS pattern short action magazines
• Large trigger guard allows for use with gloves and accepts most factory and aftermarket curved or flat triggers
• Low-profile, anti-snag ambidextrous magazine release is made of Melonite® treated steel for wear and corrosion resistance

Although the Pro 700 is offered in Black, Flat Dark Earth and OD Green, it’s currently only available in Black, with other colors shipping soon.

Additionally, Magpul is releasing their Pro Night Vision Mount today.

I’m told by Magpul that other accessories, such as the Magpul Pro FHA – Folding Hinge Adapter and the Magpul Pro FSA – Fixed Stock Adapter as well as the complete Fixed Stock Pro 700 will come very soon.

Visit www.magpul.com/featured/magpul-pro-700 for more information.

Tags:

11 Responses to “Finally Available, The Magpul Pro 700 Chassis”

  1. Jonathan Demler says:

    Any word about when their bipod will be available?

  2. Jon says:

    I really hope Magpul will release the Base hunter stock for the ruger GSR. The Pro stock for a GSR would be a dream too.

  3. Bob Puzzles says:

    How about a long action chassis?

Leave a Reply