Manufactured from Duro Textile’s ultra light Litelok material, the ATS MOLLE Dump Pouch is sized to hold six spent M4 30-round mags. You can also enlist it for duty carrying shotgun shells or as a multipurpose utility pouch suitable for evidence (SSE) collection or other generic items.

Thanks to the Litelok which is about 30% lighter than 500D Cordura, the dump pouch tips the scales at just over 2.5 ounces. It uses shock cord and ITW/Nexus Toaster Cord Loc to adjust the size of the opening of the pouch and the 3″ webbing flap doubles as a lid or can be concealed completely within the bag as well as securing the pouch in its rolled up position. In its folded state, the ATS MOLLE Dump Pouch is only 3″ x 4″ x 1.75″ and can be attached to MOLLE or PALS webbing by means of the two patent pending L Strap modular attachment straps. There is also a grommet located on the bottom allows for quick drainage.

ATS offers the MOLLE Dump Pouch in MultiCam only. Like all of their products, the ATS MOLLE Dump Pouch is made in the USA of quality, mil-spec components and is covered by their lifetime warranty.

www.ATStacticalgear.com

The ATS Legion Cobra Belt uses the industry standard AustriAlpin Cobra buckle for both ease of use and incredible strength. The Cobra buckle is rated to 11kN, which is over 2470 pounds of force. In order to make use of that strength, they built the belt from Type 13 Mil Spec parachute-grade webbing, stitching it together with 69 pound nylon thread.

The belt is reinforced with a 4 inch long “W” stitch and has a forged parachute hardware-grade, 316 Stainless Steel Triangle Link for personal retention lanyard tie-ins. To increase the strength even more, they’ve added 5 lengthwise stitches, which also enhance the stiffness somewhat. The end of the belt has been rounded and sealed so the running end won’t snag.

The Legion Cobra Belt is offered in Coyote Brown with matching buckle, or in Ranger Green and Black, both with Black buckles. They’re Made in the USA! and covered by the ATS Gear lifetime warranty against manufacturer defects.

Sized Small: 33″-36.5″ Med. 37.5″-42″ Large: 43″-44.5″ XL: 45.5″-49″

www.ATStacticalgear.com

The Antidote reservoir from Camelbak is a 103 ounce (3 liter) tactical bladder designed specifically to fit the smaller footprint of the armor- or plate carrier. They achieved this by widening and flattening the reservoir. That makes the reservoir fit the carrier far better than a traditional design. A brand new reservoir requires a brand new carrier to fit its unique shape.

To keep the weight to a minimum, ATS Tactical developed the Antidote Hydration Carrier in 500D and Multicam Litelok. In 500D, the carrier weighs just 5 ounces, and the Litelok version (pictured) weighs about 3 ½ ounces without the reservoir. The face of the carrier features elastic shock cord to secure lightweight items like jackets and gloves. There is also a drain grommet in the bottom of the carrier and the face of the flap has a soft side (female) Velcro panel for placards or morale patches. The lid is held closed by 1 ½ inch Velcro, and there is a hanger tab in the top center to suspend the reservoir from.

The AHC is about 14 ½ inches long and 10 ¼ inches wide, and uses 6 channels and 6 rows of MOLLE space.

They offer the AHC in Coyote Brown, Ranger Green, and Multicam. Black and UCP are available as special order colors. As with all ATS brand gear, it’s made in the USA from Berry Compliant, top quality American materials with American labor and is covered by the ATS lifetime warranty against manufacturer defects in materials and workmanship.

www.atstacticalgear.com