Primary Arms

Posts Tagged ‘CMC Triggers’

CMC Triggers Launches its 9mm Pistol Caliber Carbine (PCC) Single Stage Trigger

Friday, August 17th, 2018

Fort Worth, Texas: Due to the rise in popularity of Pistol Caliber Carbine (PCC) rifles and after careful research and development, CMC Triggers has launched their own PCC Trigger. The CMC AR-15 / AR-10 9mm PCC Single Stage Drop-in Trigger, available in both Classic Curved Bow and CMC’s patented Signature Flat Bow, was designed with the highest caliber that one comes to expect from CMC Triggers.

9E666A6A-EA65-4F32-9818-3ADE93332F0C

The same CMC Trigger that has become respected for use in AR-15 and AR-10 style rifles can now be easily installed in PCC rifles. Previously, PCC rifles with a standard trigger installed had approximately a 50% trigger reset failure rate. CMC’s new PCC Trigger geometry design has overcome those earlier issues. The PCC Trigger’s hammer dimensions have been modified to facilitate the 9mm platform and ensure reliability with each pull of the trigger.

The CMC Curved Trigger bow has an exceptionally smooth feel and ultra-clean break while the CMC Flat Trigger Bow renders a linear feel unsurpassed by any other trigger bow shape.

-CMC AR-15 / AR-10 9mm PCC Single Stage Drop-in Trigger Features:
-Single Stage Match Trigger
-Ultra-crisp 3.5lb trigger pull with no creep prior to hammer release
-Glass-smooth break with no feel of grittiness
-Minimal lock time is designed into the assembly using controlled hammer weight and
balance activated by a rocket wire hammer spring, assuring repeatable function with
either commercial or military grade ammunition
-Positive trigger reset allows a quick follow up shot on target
-Trigger pull is factory pre-set and not user adjustable
-Hand assembled, and hand tested
-Totally self-contained one-piece assembly
-Includes CMC Anti-Walk Pin Set
-Fits MIL-SPEC AR-15 and AR-10 style rifles
-Made from 8620 Alloy Steel and S7 Tool Steel with machined tolerances of +/– .001″
-Trigger is easy to install following the instructions:
www.cmctriggers.com/installation-instructions

While PCC shooting has been around for a while, it has recently become popular for competition shooting. USPSA now allows the PCC to be used in matches. Carbines are easier to shoot fast, and easier to shoot accurately compared to handguns. Many 3-Gun shooters have also found that shooting USPSA with a PCC is a good way to get rifle practice for 3-Gun.

7025DD12-718D-47E5-89C0-A0398EF9C382

CMC Triggers is the original maker and manufacturer of the Drop-in Trigger Group for the AR-15/10 rifle since 2003. CMC’s critical sear engagement surfaces have a propriety machining process that renders superior surface finish and dimensional control. As compared to their competition, the techniques used establish a 1-2 RMS surface finish as opposed to EDMing which leaves a pitty 32 RMS, compared to a mirror which is 0 RMS. CMC Triggers sear engagement overlap is six to eight times greater than their competitors. This provides a much safer trigger and enhances reliability.

All CMC products come with a Lifetime Warranty and are made in the U.S.A., CMC proudly designs all its products for Law Enforcement, Military and Civilian use.

For more information about CMC Triggers and all the products we offer please visit us at www.cmctriggers.com.

Triggrcon 18 – S1-Wright-12 Breaching Shotgun from R&R Targets

Monday, July 30th, 2018

CMC Triggers displayed the S1-Wright-12 from R&R Targets. Although it’s a custom built design which has been used for 3-Gun competitions, this magazine fed, semi-auto, 12 ga shotgun is being evaluated by several SOF and LE organizations for breaching use.

70CB72D1-7EB2-4080-90B9-DF8A002B62E1

I had the opportunity to fire it during Triggrcon Range day and it was quite controllable. If you’re familiar with an AR, you can shoot the S1-Wright-12. It offers the advantage of rapid magazine reloads (12 rounds) and ammunition changes. However, the bolt does not lock to the rear on the last shot like an AR. It was also fitted with a SilencerCo Salvo suppressor and I’m told that those currently evaluating the weapon use suppressed rifles and appreciate its utility.

8AF3CA0E-5537-4478-BF7D-EA19340F390E

2548452B-4BC8-4458-899B-43A6737D4867

The charging handle is mounted to the left side of the receiver and the top of the receiver features Mil STD 1913 rail.

6B0EBD0C-9E06-4B14-B35D-046EAF8B024B

The reason CMC Triggers was displaying the gun is that it is equipped with one of their triggers. During development, R&R Targets evaluated triggers from several different triggers, but the CMC AR10 trigger they selected was the only one which could stand up to the repeated hammering of the semi-auto 12 ga.

60A8ACD2-835A-4338-8331-D88116BD55E2

Look for more info soon. Until then, visit store.randrtargets.com/S1-Wright-12-Wright-12.

SOFIC 2018 – CMC Triggers Booth 249

Monday, May 21st, 2018

E7787F2A-C12D-42FD-976C-6744463EB8E7

Since November 2017 CMC Triggers has been working on New specific products directed at SOCOM End users. CMC has seen its new Full Auto Select Fire Triggers included into SOCOM Contracts during this time. Responding to the needs of specific units, CMC Triggers works to deliver 100% solutions where ‘off the shelf commercially available items’ only meet 80% of the users requirement. The Family of Glock Accessories to include the New Combat Magwell for Various Glock Models has been tested to meet the strict demands of US SOCOM units. The Magwell is manufactured from 6061-T6 Aluminum. Available for various Glock Models and Generations 1-4, variations include a Low Profile Concealed carry design.

Estimated MSRP for all Models $80.00

CMC Triggers and its products are subject to stringent in house quality control and offer lifetime 100% satisfaction Warranty.

100% Manufactured in house in The Great State of Texas!

www.cmctriggers.com

SHOT Show – CMC Match Precision Glock Barrels

Wednesday, January 24th, 2018

IMG_0323

The market for Glock aftermarket parts is continuing to grow, including an ever-widening selection of barrels, and from an initial view, CMC Triggers’ foray into that market seems to be a solid one. CMC’s Match Precision Glock Barrels are being offered for Gen 3 & 4 G19, G17, and G34 pistols, in standard and 1/2×28 threaded profiles. Made of pre-hardened 416R stainless steel, the barrels are 6 grooves, cut rifled, with a 1:10 RH twist rate, and are fluted for aesthetics. These barrels are drop-in, requiring no gunsmithing or special assembly to function, and are 100% manufactured in Texas in CMC’s facility.

The CMC Triggers’ Glock barrel line is being offered in three finishes: Stainless, Black DLC, and Brozne TiCN.

www.cmctriggers.com

CMC Barrels

Friday, January 19th, 2018

CMC’s Match Precision Barrels are the ultimate upgrade drop in barrels for Gen 3 & 4 Glock® 17,19 and 34 Pistols. Our Match Grade barrels are precision machined from Certified, DFARS compliant; pre hardened 416R premium grade stainless steel, to extremely tight tolerances and exacting details.
416R stainless steel is recognized for its corrosion resistance, machinability and high tensile strength; it is the industry standard for premium Match Grade barrel manufacturing.

IMG_6230

CMC’s propriety In house machining, production and Quality control inspection process’s allow us to attain an ultra-precise barrel with enhanced slide fit & lock up for improved accuracy.

Our barrels are 6 groove, cut rifled, 1:10 Twist Right Hand, fully QC inspected, double honed (rough and finish) to produce the smoothest bore possible, with a Max Roughness Average (RA) of 12. Finished bore dimensions are held to +/- 0.0005″ tolerance from nominal groove and bore dimensions but the dimensions are uniform to within 0.0002 for maximum consistency, accuracy and quality.

SAAMI, Match Grade specification chambers, precision cut and finished to a maximum Roughness Average (RA) of 16.
The pre hardened 416R stainless steel is stress relieved to an exacting recipe after rifling and final hardness is 38-42 Rockwell C before final barrel profile machining is completed.

Barrels are bead blasted to create a satin finish prior to plating and are available in 3 finish options.
§ Stainless , uniform Satin Blast Finish with ultra- low friction hBN (Hexagonal Boron Nitride) Bore & Chamber
§ Bronze TiCN, with ultra low friction hBN (Hexagonal Boron Nitride) Bore & Chamber
§ Black DLC, with ultra low friction hBN (Hexagonal Boron Nitride) Bore & Chamber
User friendly, our barrels are drop in; they do not require gunsmith assembly.

These are an affordable, ultra accurate, durable upgrade to your existing Glock® 17,19 or 34 factory barrel.
Barrels are available with and without suppressor threads in 1/2-28 TPI RH
Our Barrels are straight fluted for aesthetic purposes

100% Manufactured in house, in The Great State of Texas

Glock17, 19 Threaded Fluted MSRP $210.00
Glock 17, 19 & 34 Non Threaded Fluted MSRP $199.00
Delivery In stores February 2018

CMC Triggers Website

American Defense Manufacturing To Attend NYTOA

Friday, April 21st, 2017

NYTOA

New Berlin, WI – 23APRIL2017 – American Defense Mfg® is proud to support our nations law enforcement officers with high quality, intentionally superior products. American Defense Mfg® will be displaying a full line of rifles and mounting solutions at NYTOA www.nytacticalexpo.com in conjunction with Vortex Optics and CMC Triggers 25APR & 26APR.

www.americandefensemanufacturing.com

CMC Triggers to Release GLOCK Triggers at SHOT Show

Saturday, January 7th, 2017

Look for a debut at Industry Range Day with shipment a few weeks after SHOT Show.

www.cmctriggers.com

Ares Armor – Archimedes AR15 Lower Parts Kits

Tuesday, May 20th, 2014

Archimedes AR15 Lower Parts Kit

Ares Armor has recently released the Archimedes High Quality Lower Parts Kits for the AR-15 platform. Ares partnered with CMC Triggers, Ergo Grip, and Prince50 Designs, among other companies, to create the kits, which come in two configurations: Flat Trigger and Curved Trigger:

Flat Trigger

  • CMC 3.5lb Flat Trigger with the new style anti-walk pins
  • Gavel Ambidextrous Safety Selector
  • Ares Armor Ergo Grip
  • Prince50 Extended Takedown Pin
  • Billet Trigger Guard
  • All other standard required parts such as: Mil-spec bolt catch, detents, springs, etc.

aresarmor.com/store/Item/Ares_LPK_Flat_Trigger

Curved Trigger

  • CMC 3.5lb Curved Trigger with the new style anti-walk pins
  • Gavel Ambidextrous Safety Selector
  • Ares Armor Ergo Grip
  • Prince50 Extended Takedown Pin
  • Billet Trigger Guard
  • All other standard required parts such as: Mil-spec bolt catch, detents, springs, etc.

aresarmor.com/store/Item/Ares_LPK_Curved_Trigger

The kits are currently available at 33% of the total value of the combined parts, so take advantage of the deal while you can.

aresarmor.com/store