GORE

Posts Tagged ‘Robar’

Robar – M1 Garand Service Grade Enhancement Package

Friday, March 31st, 2017

Here is what ROBAR is doing to non-collectible M1 Garands.

Robar’s Service Grade Enhancement Package ($1895) consists of:
-Supply and Install New Barrel, Headspace and Time
This service includes the removal of the old barrel and installation of a new barrel. The chamber will be finish reamed to give proper headspace within military specifications. The take off barrel will be returned unless directed otherwise.

-Supply and Install New Op Rod

-Metal Refinish
This service includes the disassembly of the rifle, surface preparation and coating/plating of the metal parts to match new laminated stock. Rifle will be reassembled and function fired. Includes NP3 plating 10 M1 Garand Clips. Removal of excess pitting is not included.

-Fit New Laminated Stock/Return Old Stock
This service includes the removal of the old stock and transfer of the stock hardware from the old stock to the new laminated stock. We will also make sure the hand guards have appropriate clearances and the trigger group lock-up is properly tight, but not too tight.

-Supply and Install New Gas Cylinder

-Trigger clean up, remove creep, 4.5 lb+
Remove all noticeable creep from second stage, but maintain a crisp military two stage trigger pull and a trigger weight of at least 4.5 lb.

-Supply and Install Ultimak Scout Mount

EXTRA
NP3 Plus on Bolt, Gas Cylinder, and Op Rod – Add $50
NP3 Plus Entire Rifle – Add $100

Accessories
Leupold FXII 2.5X Scout Scope w/QR Rings Coated to Match Receiver – $400
Burris 2-7X Scout Rifle Scope w/QR Rings Coated to Match Receiver – $550
Wilderness Tactical Sling – $55

Robar – Glock OEM Trigger Kit with Glockcraft Flat Face Trigger

Tuesday, October 6th, 2015

  

This trigger kit was created in order to avoid bypassing the Glock’s inherent safety mechanisms which occurs with some other aftermarket kits. Includes Glock OEM Mainspring Housing, Glock OEM Trigger Bar and GlockKraft Aluminum Flat Face Trigger (NP3 or Black Hard Anodized), Minus Connector, Wolf X-Power 6lb Trigger Spring. Trigger Bar, Minus Connector, and Ejector are properly deburred, polished, and plated with NP3.

robarguns.com/pro-shop/product/robar-glock-oem-trigger-kit-with-glockkraft-flat-face-trigger