TYR Tactical

Posts Tagged ‘Unity Tactical’

Unity Tactical FUSION Friday

Friday, July 20th, 2018

FUSION, by Unity Tactical, is a system of modular, multi-purpose components that provide end users unparalleled flexibility in mounting accessories to weapon platforms.  It offers complete control in attachment of lights, lasers, sights, and other equipment to achieve complete integration, optimal placement, lightest weight, and most economy of space.

fusion-config-1a-breakout.jpg

This FUSION configuration features the Micro Hub 2.0, Backup Iron Sight – Folding, and Lightwing – Left.  The build is mounted in front of an AN/PEQ-15 laser and supports a Surefire M600U Scout Light.  Mounting the Micro Hub forward of a laser allows a pressure switch (shown here with TAPS) to be snugged right up behind the laser body for easy access to both onboard and remote controls.  The Micro Hub is extremely low profile, creating no interference with lasers.  The Backup Iron Sight – Folding is narrow enough to easily fit between the apertures of dual output lasers.  The Lightwing will readily accept direct-mount of Surefire Scout and Millennium series weapon lights, as well as Streamlight PROTAC Rail-Mount lights.  This Lightwing is the Left Side variant, but mounted backwards on the right side of the rifle – cantilevering the light within the footprint of the rail.  Attaching lights to the Lightwing raises them up above the bore and tucks them tighter under the laser body for an extremely compact package.

FUSION Config 1B BreakOut

FUSION components are machined from 6061-T6 aluminum and MILSPEC Type 3 anodized.  Designed and made in the US from US materials and good ole’ fashioned American innovation.  FUSION is the original and best modular accessory mounting system.  Make your gear work for you, not the other way around.

FUSION components are available from Unity Tactical and authorized dealers to build your perfect setup.

www.unitytactical.com

Unity Tactical Cold Weather Liner

Thursday, January 18th, 2018

Houma, LA – January 18, 2018 – Unity Tactical, a leader in innovative equipment today announced the release of their Patent Pending Cold Weather Liner (CWL) which will be on display at SHOT Show 2018. The Cold Weather Liner was designed to provide a helmet integrated insulation solution. The CWL is constructed of high quality wicking DWR treated Power Stretch fleece and is compatible with all popular helmets (Ops-Core, Crye Precision, Team Wendy, MTEK, MICH, ACH). The CWL integrates with both under helmet or helmet mounted hearing protection. It is available in Black, Flat Dark Earth, and Ranger Green.

312542DA-59B1-4A92-9C8F-2D47C05BFA2C

The CWL installs between the helmet shell and pads (OEM or aftermarket) using existing Velcro, requires no change to the helmet and takes less than a minute to install. Because the liner installs between the shell and the pads, it will not shift or bunch and does not interfere with other helmet borne systems.

3A5C4E89-528A-4482-BB92-2AF8D4022539

Cold Weather Liner PDF

The Unity Tactical Cold Weather Liner is Berry Compliant and will also be available in an FR version.

Contact info@unitytactical.com to order or for additional information.

www.unitytactical.com

MSRP: $95

Caveat Emptor – Counterfeit Tactical Augmented Pressure Switch Identified

Monday, October 30th, 2017

TNVC notified us that a counterfeit version of their joint venture with Unity Tactical, the Tactical Augmented Pressure Switch has been identified, along with this note.

IMG_5134

PSA: We have been made aware of an unlicensed copy of TAPS, made by a Hong Kong Airsoft company. The maker of these copies has since ceased, but we do not know how many were sold. These copies look almost identical except the logos are different and the contact leads are not standard. The laser lead on the fake will not fit standard US lasers. Just want to let you guys know about these so you don’t accidentally buy one on ebay and find out the hard way that it doesn’t work. here’s some pics of the fakes:

Always ensure you purchase your equipment from authorized dealers.

TNVC & Unity Tactical – TAPS Pro Video Instructions

Tuesday, February 14th, 2017

TAPS_2

The Tactical Augmented Pressure Switch – Programmable was designed by Unity Tactical and is available from TNVC. They’ve collaborated on this instructional video.

Now available on TNVC’s and Unity’s web sites. Volume dealers and distributors welcome.

www.tnvc.com
www.unitytactical.com

TAPS In Stock and Ready to Order from TNVC & Unity Tactical

Thursday, February 9th, 2017

TNVC and Unity Tactical are very happy to announce the release of TAPS and TAPS PRO.

TAPS_1

For years the industry has struggled with standard pressure switches functionality and modularity. TAPS changes the way with think of pressure switches, and it now becomes a true component of a light and laser. No longer will the operator struggle to attach and maintain their pressure switch to a rail system, no longer will the operator wish he could power a white light and visible laser with one button. TAPS breaks through these long standing barrier’s with a paradigm shift to enable a pressure switch to do what it’s supposed to do; a complete one point command and control system for all weapon-mounted electronics.

TAPS_2

TAPS will be offered in 2 versions, TAPS PRO and TAPS.

TAPSPro Info Sheet

TAPS PRO will be a full programmable switch that mounts directly to any industry standard rail, including M1913 Picatinny, KEYMOD, M-LOK and will run off a single CR2032 battery for over 3000 “device-activating hours” (battery will last for years under normal operation tempo). The switch will operate in failsafe mode if the battery dies or is not present (this means it will work as a standard pressure switch until battery is replaced – user preferences will remain programmed). It features two onboard buttons and two accessory leads. TAPS comes standard with a Surefire Light lead and MIL-Standard / Crane Laser Lead that fits NATO standard lasers from Insight Technology, Steiner, B.E. Meyers, and others.

TAPS Info Sheet

TAPS (non-programmable) mounts directly to any industry standard rail, including M1913 Picatinny, KEYMOD, and M-LOK. No third party rail adapters are needed, keeping the weapon lighter and sleeker. It features two onboard buttons and two accessory leads. TAPS comes standard with a Surefire Light lead and MIL-Standard / Crane Laser Lead that fits NATO standard lasers from Insight Technology, Steiner, B.E. Meyers, and others.

TAPS_3

Lifetime warranty.

Now available on TNVC’s and Unity’s web sites. Volume dealers and distributors welcome.

www.tnvc.com

www.unitytactical.com

SHOT Show 17 – TNVC/Unity Tactical TAPS Update

Wednesday, January 18th, 2017

During Range Day we mentioned the production version of the Tactical Augmented Pressure Switch. To clarify, there are two variants and externally both look the same because they have the same basic functionality.


The TAPS mounts to M-Lok, KeyMod and Pic rail and includes 7″ SureFire/Insight or 7″ Insight/Insight leads. Once again, it requires a 2032 battery for constant on, but even without it, momentary still works. The only difference from the base model and the TAPSpro is that the pro model is programmable. Consequently, there’s a difference in price. The TAPS is $139 and TAPSpro is $239. Considering other switches are more expensive (and not programmable) that’s not a bad price. Plus, TAPS is 100% Made in USA. Additionally, the switches are available in FDE and Black.

These have been manufactured. The products will be loaded on the website and begin shipping next week.

I hope this answers any questions that have come up.

www.tnvc.com

FirstSpear Range Day 17 – TNVC TAPS

Monday, January 16th, 2017

TNVC has made it happen! The Tactical Applications Pressure Switch (TAPS) from Unity Tactical has made the transition from low rate to full production.

It mounts directly to a Mil STD 1913 rail and its two pressure pads are user programmable to slaved or individual modes so you can control both light and laser from a single pad. You can control momentary or constant with the switch.

One lead works with SureFire lights while the other interfaces with Steiner or Insight lasers. It requires a single CR-2032 battery but will still offer momentary On with a dead or no battery.

www.TNVC.com

Unity Tactical Is Now The Exclusive Seller For Iron Forged Concepts’ Product Line

Monday, June 27th, 2016

Houma, LA- June 27, 2016 – Unity Tactical™ is proud to announce that it is now the exclusive seller for Iron Forged Concepts™ entire product line. These products include the successful Sordin Arc Rail Adapters (SARA) as well as the upcoming Modular Attached Rail Kit (MARK), which will now proudly wear the Unity Tactical logo. Bringing on IFC’s line of helmet accessories is a natural progression for Unity. In 2015, Unity Tactical™ began delving into the world of helmet accessories with the Knuckl™ accessory mount and an NVG adapter for GoPro™ cameras developed is in association with TNVC. For more information on Unity Tactical’s full line of products, visit: www.unitytactical.com

“In our mission to better serve those that serve us; our military, law enforcement, first responders, and commercial partners, Iron Forged Concepts has accepted the opportunity to come under the Unity Tactical banner. Unity Tactical will continue to support IFC products and customers with the same top notch product and customer support that Unity and their existing products are known for. We are very excited to announce this agreement and cannot think of a better fit for the Iron Forged product family. God bless and stay safe – Zach, IFC “

“Zach and Iron Forged have built an excellent product and reputation in the industry. We are honored to continue to support our military, LE, first responders, and civilian shooters with his products. Unity Tactical will continue to push forward with new products and innovations in this product line to provide the end users with the absolute best products to support their mission.”

-Trent Zimmer, President, Unity Tactical

www.unitytactical.com