The following two definitions are crucial to an honest appreciation of this topic.

Webster’s-Merriam Dictionary

Look
Verb: to direct your eyes in a particular direction
See
Verb: to notice or become aware of (someone or something) by using your eyes
Aware
Adjective: knowing that something (such as a situation, condition, or problem) exists

I see far too often folks that conduct all kinds of movement and posturing after a non-scenario course of fire that is called “tactical awareness” but is probably more precisely called “gun-fu” or a “tactical kata”. Now don’t get me wrong, I am all about tactical awareness and keeping your “head on a swivel” but what I am not about is looking like you are doing something but you’re really not. My big three are
1.) scan and assess
2.) checking 6
3.) looking at an AR ejection port after every string of fire

Scan and assess and checking 6 are both billed as giving you critical information and done correctly they actually do. The problem is that in the conduct of both, people overwhelmingly “look” in a direction but don’t “see” anything. They look at this as a way to condition themselves under stress to be aware but what they are actually doing is the exact opposite. By “looking” and not “seeing” they are conditioning themselves to move their head left and right and not properly process anything they did look at. By not processing your surrounding with specificity you are conditioning yourself to make the requisite amount of motion and movement and falsely convince yourself that you are “aware” of your surroundings when actually you are overwhelmingly not.

In the case of looking at an ejection port every time a string of fire is complete even though there is no specific stimulus, in doing so you are convincing yourself you saw more than you actually did. I see it as wasted motion that gives very minimal and incomplete information unless a physical stimulus was perceived. My issue is two-fold: it can’t be done at night with any legitimate effect in any reasonable amount of time and if you look and actually have enough light to see the bolt in battery the only thing you genuinely know is the bolt is in battery…nothing more! If the bolt locked to the rear then you would have felt the energy transfer to the rear but not back forward and that stimulus would have told your body through repetition and subsequent learned patterns of response (muscle memory) to reload your rifle. The input on the rifle gives you feedback so if I am getting the right feedback (the gun is running) why spend time and awareness getting minimal or incomplete information? If you are going to look then do a quick press-check (which can be done day or night) but if you don’t, the only thing you genuinely know is the bolt is in battery. If the magazine was bad and didn’t lock back or feed another round then a press-check is the only way to positively identify the status of your rifle.

Scanning and assessing, checking your 6 and knowing the status of your rifle or any weapons system for that matter is not done through the physical repetition alone but through mental repetition in conjunction with physical cues. Different levels of experience allow some to be vigilant when vigilance is required but not on a drill where it is unnecessary. Less experienced people cannot differentiate between when it is a necessity and when it is not so that makes them feel compelled to do the dance every time they complete a drill. One’s ability to differentiate between the requirements of a situation speaks to how they train. Rote memorization of a “tactical dance” does not make you genuinely tactically aware. In reality it will make you less aware because you are conditioning yourself to physically act out the right answer but not get the benefit cognitively of the information it provides.

If you want to scan and assess or check your 6 after every course of fire and ACTUALLY SEE WHAT YOU ARE LOOKING AT then you are good to go in my book. If you press-check after every course of fire (and I do if there is any gap in time available along with pulling the magazine out and assessing by experience and weight if I think I am prepared for the next task) then I’m your advocate as well. Where I part ways with many is when the “gun-foo” starts and people are moving all around and looking all around and seeing almost nothing.

Looking is directing your vision…seeing is processing what you looked at. Don’t just look, see what’s there! Done properly you will genuinely be tactically aware…not just dancing around the firing line.

-Mike Pannone

Mike Pannone retired from the Army’s premier assault force (1st SFOD-D) after an explosive breaching injury. A year after his retirement America was attacked on 9/11 and he returned to help serve his country as the head marksmanship instructor at the Federal Air Marshals training course and then moved to help stand up the FAMS Seattle field office. In 2003 he left the FAMS to serve as a PSD detail member and then a detail leader for the State Department during 2003 and 2004 in Baghdad and Tikrit.

In 2005 he served as a ground combat advisor of the Joint Counter IED Task Force and participated on combat operations with various units in Al Anbar province. Upon returning he gave IED awareness briefings to departing units and helped stand up a pre-Iraq surge rifle course with the Asymmetric Warfare Group as a lead instructor. With that experience as well as a career of special operations service in Marine Reconnaissance, Army Special Forces and JSOC to draw from he moved to the private sector teaching planning, leadership, marksmanship and tactics as well as authoring and co-authoring several books such as The M4 Handbook, AK Handbook and Tactical Pistol shooting. Mike also consults for several major rifle and accessory manufacturers to help them field the best possible equipment to the warfighter, law enforcement officer and upstanding civilian end user. He is considered a subject matter expert on the AR based Stoner platform in all its derivatives.

www.ctt-solutions.com

Gunfighter Moment is a weekly feature brought to you by Alias Training & Security Services. Each week Alias brings us a different Trainer and in turn they offer some words of wisdom.

Steel is an incredible tool for marksmanship training due to the instant feedback and (other than an occasional repainting) because it removes the requirement to go downrange and score or service (read “paste targets”). One problem I frequently see that leads to bad or sloppy habits is poorly chosen sizes of steel. I constantly see people at ranges or in videos shooting speed drills using steel that is very large, giving the shooter and viewer a deceiving appearance of skill and or speed. For example, if you do a one-shot draw at 10 yards on a B/C zone plate as opposed to an A-zone plate, there is a completely different level of precision and skill required.

I demonstrated this concept with a Glock that had no sights at all and performed 1-shot draws on a B/C-zone steel in 1 second or less from 10 yards with ease. This drill demonstrates the benefit of good body mechanics, proper presentation, and is actually very easy to perform. This drill emphasizes the point that at combative ranges, that body position is where the speed comes from: proper use of large steel. Now change the steel to an A-zone (60% smaller surface area), and it becomes far more problematic and really a function of luck for the same 1 second shot. The point being, if you want to get faster and more accurate, doesn’t shoot targets of a size that allow hits with little to no sight picture. Work your draws on an A-zone steel or smaller. I frequently do my reload drills on a 6” round steel to force me to follow that front sight 100% of the time or miss. The benefit is continuous reinforcement of the requirement to follow the sights to get the hits…come off the sight—come off the target. The gun will follow the eyes every time so keep the eyes where they should be! I recently did a drill called “Sight Tracker” that reinforces this very concept. You can’t make the hits if you don’t watch the sights.

Take a look at it here:

The takeaway is that everybody looks like a superhero shooting big steel. Often times the result is a reinforcement of sloppy habits and bad technique along with a false sense of the speed at which you can reliable shoot and hit. Use steel that GENUINELY makes you aim and forces you to see those sights every time you break a shot and then follow them to the next shot or next target.

If you choose steel that lets you get away with little or no sight picture, that is what you are practicing…if you use small steel that makes you follow the sights every shot and work for every hit, that is what you are practicing.

In conclusion, you should choose your steel wisely!

For reference here are some numbers all in square inches to help evaluate relative difficulty:

• 6” round- 28.27 sq. in.
• 8” round- 50.26 sq. in.
• 8” square- 64 sq. in.
• A-Zone- 66 sq. in.
• ¼ size IPSC- 110 sq. in.
• A/B/C-zones – 220 sq. in. (approximate)
• Full size IPSC 430 sq. in. (approximate)

– Mike Pannone

Mike Pannone retired from the Army’s premier assault force (1st SFOD-D) after an explosive breaching injury. A year after his retirement America was attacked on 9/11 and he returned to help serve his country as the head marksmanship instructor at the Federal Air Marshals training course and then moved to help stand up the FAMS Seattle field office. In 2003 he left the FAMS to serve as a PSD detail member and then a detail leader for the State Department during 2003 and 2004 in Baghdad and Tikrit.

In 2005 he served as a ground combat advisor of the Joint Counter IED Task Force and participated on combat operations with various units in Al Anbar province. Upon returning he gave IED awareness briefings to departing units and helped stand up a pre-Iraq surge rifle course with the Asymmetric Warfare Group as a lead instructor. With that experience as well as a career of special operations service in Marine Reconnaissance, Army Special Forces and JSOC to draw from he moved to the private sector teaching planning, leadership, marksmanship and tactics as well as authoring and co-authoring several books such as The M4 Handbook, AK Handbook and Tactical Pistol shooting. Mike also consults for several major rifle and accessory manufacturers to help them field the best possible equipment to the warfighter, law enforcement officer and upstanding civilian end user. He is considered a subject matter expert on the AR based Stoner platform in all its derivatives.

www.ctt-solutions.com

Gunfighter Moment is a weekly feature brought to you by Alias Training & Security Services. Each week Alias brings us a different Trainer and in turn they offer some words of wisdom.