SureFire

Archive for February 8th, 2010

Rep. John Murtha Dead at 77

Monday, February 8th, 2010

Rep John MurthaU.S. Rep. John P Murtha from Pennsylvania’s 12th District died today of complications from gallbladder surgery at a Virginia Hospital Center in Arlington, Va. He was 77.

An officer in the Marine Reserves, he became the first Vietnam War combat veteran elected to Congress in 1974. He served for two decades as the ranking Democrat on the House Armed Services Appropriations subcommittee where he was able to garner a great number of earmarks that attracted numerous defense contractors to his District.

Murtha joined the Marines in 1952 eventually serving as a drill instructor at Parris Island, S.C. After his discharge Murtha moved home to Johnstown, PA and remained with the Marine Reserves until he volunteered to go to Vietnam. There, he served as an intelligence officer there from 1966 to 1967 and received a Bronze Star and two Purple Hearts. In 1990, he retired from the Marine Reserves as a Colonel. Ironically, he later drew criticism from many service members for accusing Marines of murdering Iraqi civilians “in cold blood” at Haditha, Iraq in 2006.

His degree in Economics from the University of Pittsburgh earned in 1962 apparently came in handy. He barely survived the Abscam scandal by the skin of his teeth and for some reason campaign contributors seemed to regularly enjoy healthy earmarks.

During the Abscam corruption probe the FBI caught him on videotape in a 1980 sting operation turning down a $50,000 bribe offer while holding out the possibility that he might take money in the future. “We do business for a while, maybe I’ll be interested and maybe I won’t,” Murtha said on the tape. In the Government’s case six Congressmen and one Senator were convicted. Although he was not charged, he was named as an unindicted co-conspirator and he testified against two other Congressmen.

However, his involvement with the lobbying firm specializing in defense contractors, the PMA Group has garnered his most recent attention. During 2007 and 2008, Murtha and two fellow Democrats on the appropriations subcommittee directed $137 million to defense contractors who were paying PMA to get them government business. Between 1989 and 2009, Murtha received more than $2.3 million in campaign contributions from PMA’s lobbyists and corporate clients, according to the Center for Responsive Politics. Shortly after the 2008 election, the FBI raided PMA’s offices as part of a criminal investigation but Murtha himself has now escaped any investigations into wrongdoing.

Many of my readers will recall that Murtha is behind the current Afghanistan Camouflage testing being conducted by the Army. After speaking with several Army NCOs he challenged the Army to investigate more effective camo patterns for use in Afghanistan. The Army was supposed to have rendered a decision by now but it has been inexplicably delayed.

Rep Murtha will be remembered as much for his service as his challenged sense of ethics. I wonder how his passing will effect the defense contractors in his district.

Lightweight Hammer Forged Barrels from Centurion Arms

Monday, February 8th, 2010

Centurion Arms has just announced a new line of hammer forged barrels. Just like in the load carrying world, with the advent of modularity, small arms have become overloaded and a movement has formed to begin taking the weight off the rifles. One of the easiest means is to remove unneeded accessories, or to combine functionality into fewer items. Another move has been to produce lighter barrels. One way this is possible is through the hammer forging process.

Hammer forging is a process in which a drilled and reamed blank has its rifled bore and chamber formed by swaging. During production of the barrel, the internal profile is formed by a series of opposing power hammers which concentrically “crush” the drilled blank around a precision-ground and hardened mandrel. This process yields an extremely uniform bore with a tough, consistent surface finish on the inside of the barrel. Producers use differing methods of honing and Centurion combines theirs with a specially tapered section of rifling formed during the forging process to improve accuracy. They specified a 1:7 twist rate and a Mil-Spec 5.56mm chamber. Naturally, they chose to finish the barrels with a manganese phosphate finish (Mil-Spec A-A-59267).

Centurion Arms Lightweight Hammer Forged barrel

Centurion Arms specifies that the hard chromium lining used to coat the chamber and bore is applied to twice the thickness of standard small arms barrels. The actual steel itself used for the barrels is a Chrome-Moly steel alloy specifically developed as a machinegun barrel steel providing increased barrel life under prolonged rigorous firing schedules. The forging process also work hardens the barrel steel resulting in a very durable and much longer lasting barrel. Finally, the barrels are HPT (High Pressure Testing) tested which is a process wherein a proof load rated at 70,000 psi (far exceeding the pressure of a normal round) is fired trough the barrel. The barrel is then tested with a non-destructive process called MPI (Magnetic Particle Inspection) to detect any flaws in the barrel extension and barrel from the proof load.

The barrels retails for $325.00. For more information, please contact Centurion Arms at www.centurionarms.com.

Camo the World Over

Monday, February 8th, 2010

Latvian Digital CamoStrike Hold! has put together a pretty comprehensive photo study of the latest camo patterns from all over. Quite a bit of it is digital and in his well put together introduction he makes a good case that the digital craze started by the Canadians has made the biggest influence in international combat uniform design. Take some time to peruse the photos collected from a wide variety of sources. You will also see quite a bit of American influence over pattern selection among allied nations.