Visit GORE-TEX at AUSA

Telluric Group Completes Collimator Shipment To US Army

Jacksonville, FL – May 1, 2014 – Telluric Group, LLC. completed delivery of Small Arms Collimator (SAC) Kits to the US Army for inclusion in the Advanced Sniper Accessory Kit (ASAK). The SAC Kits, referred to by the Army as Sniper Weapon Collimators (SWC), were designed for use with the M110 Semi-Automatic Sniper System (SASS) and the M2010 Enhanced Sniper Rifle (ESR). They also work with legacy M24 sniper rifles.

Small Arms Collimator

The collimators were chosen by the Army as a no-comparison solution for two reasons. First, they speed up the initial live-fire zero process for weapons that have not yet been zeroed (i.e. during sniper training). Second, and most critically, they allow deployed snipers to accurately check zero in any environment without live-fire. “Going into the fight with a good zero is critically important,” said Brian Garrett of Telluric Group. “The SAC allows snipers to confirm zero quickly anytime, anywhere- before they leave the FOB [forward operating base], after movement across rough terrain, or even at their final firing position.” By ensuring that weapons are always zeroed, SACs have improved Soldiers’ confidence in their weapons and continue to enhance operational effectiveness.

Pouches

Small Arms Collimators are manufactured by Pyser-SGI Limited, a British defense company known for over a century for their reliability and innovation. SACs are available for assault rifles, sniper weapons, machine guns, and grenade launchers. They work with iron sights, day optics, and image intensified night vision optics. Collimators are also available for thermal weapon sights and for IR and visible laser aiming devices. Telluric Group is the exclusive US distributor for Pyser-SGI and the Small Arms Collimator.

Tags:

4 Responses to “Telluric Group Completes Collimator Shipment To US Army”

  1. Joe S says:

    Anybody have a NSN for ASAK?

  2. Canadian says:

    Have used these for quite a while.
    If you look at the above photo, the bottom spike or “mandrel” simply slides into the barrel, and the shooter looks through the optics into the top protion of the SAC. They will see a simple grid pattern with letters and numbers, and whichever reticle is in the optics falls into the grid. In theory, once you have zeroed your weapon, the SAC can be slid back on and you can confirm the reticle still sits at “G,3” or wherever it was after zeroing.
    In the photo, the wire which runs to the bottom portion of the SAC, is actually connected to a small tritium light source, which comes off of the bottom, and gets screwed into the top for use in low light.

  3. Clasky says:

    I’ve used this pretty extensively and like it so much that we even started selling them at TNVC. There is no better way to confirm your zero in a non-permissive environment. No downrange signature. No shots fired. Big congrats to Telluric for bringing the SAC to the states and for the contract!

  4. Could not happen to a better company and owner! Nice work Brian!