SureFire

Gerber Center Drive

img_4074_copy

This is the Gerber Center Drive, a brand-new made-in-the-USA multitool that’s launching today, and Gerber sent us a pre-production model a few days ahead of the launch to check it out.

img_4078_copy

The Center Drive is manufactured from stainless steel, and features 14 individual tools within its frame.

img_4076_copy

The pliers are spring loaded, and are released upward via a side-mounted sliding button, purposely designed for one-thumb activation, rather than the swing open design on traditional multitools.

img_4086_copy

The pliers consist of a needle nose point with a standard center, as well as rotatable carbide wire cutters and a wire stripper.

img_4082_copy

The main blade on the Center Drive is a 3.25″ fine edge blade. According to Gerber, this blade is “30% larger than the competition”; press materials use the main blade on the Leatherman OHT for the size comparison. The blade also locks into place when fully extended via a tension lockbar.

img_4092_copy

The opposite arm of the Center Drive features the following tools:

  • Pry bar
  • Nail puller
  • Bottle opener
  • Serrated Blade
  • Awl
  • Fine & course sided file
  • img_4081_copy

    These tools lock into place when fully extended and can be retracted by using a thumb-break slide release on the opposite side of the arm, which also incorporates a lanyard hole. The arm opposite this one features both a 3″ ruler as well as an 8cm ruler.

    img_4091_copy

    Easily the most impressive feature of the Center Drive is the tool of its namesake, the full-size center axis driver. Unlike traditional multitools, which typically feature a lower profile driver, the Center Drive’s driver juts out of the tool’s frame 3.25″ and curves inward towards the center axis, allowing for improved torque and rotation. The center axis driver features a magnetic attachment head, which supports any number of standard bits. Like the blade, the center axis driver locks into place via a tension lockbar.

    img_4085_copy

    The Center Drive also features this bit storage slot which snaps into place within the frame and rotates outward, allowing quick access to a second bit. By default, it comes with a flat head bit already inserted.

    img_4089_copy

    The Center Drive comes with a 12-bit kit, in addition to the Phillip’s head and flat head bits that are already included with the tool. It also comes complete with a nylon and elastic sheath which accommodates both the Center Drive and the bit set. The sheath can be mounted by the rear to a belt either vertically or horizontally via its rear straps.

    img_4090_copy

    By Gerber’s own admission, unlike the Center Drive itself, both the bit set and pouch are made in China. Regardless, the tool itself is USA-made, and it has a host of great features that should make for an excellent option for EDC or just a functional backup tool.

    center-drive.com

    You can read the official release from Gerber by clicking the link below

    THE MULTI-TOOL JUST GOT A REALITY CHECK
    Gerber introduces the Center-Drive Multi-tool

    PORTLAND, OREGON (Oct 18th, 2016) – Gerber, leading the industry in knives, tools and equipment for over 75 years, announces the introduction of the multi-tool that will redefine the category – the Center-Drive. Challenging the status quo, it delivers real and compelling advancements in capability and serves the professional end user like none before it.

    CENTER-DRIVE Multi-Tool
    Available | November 1st 2016
    Price | $89.00 MSRP
    [multiple sheath + tool kit options available]

    www.gerbergear.com/Multi-Tools/One-Hand-Opening/Center-Drive_30-001193

    PRODUCT OVERVIEW

    The Center-Drive. Gerber’s new multi-tool offers uncompromising performance through revolutionary design. Innovative Center Axis Tech™ aligns the full-size driver in the center of the tool to yield maximum torque and rotation, just like the real thing. No productivity is sacrificed with the addition of a 30% larger outboard blade and one-thumb opening sliding jaws. Full size, real tools – the multi-tool just got a reality check.

    Screw Conventional Thinking.

    It seems so obvious – but until now no multi-tool has ever offered a full-size driver on the center axis with a standard bit. The result is all the ergonomics and torque you’d expect from the real thing, ready at the flick of a thumb.

    Cut the B.S.

    Get right down to business. A single flick of the thumb gets you access to a full-size outboard knife that is 30% larger than the competition. Don’t worry; reverse thumb support gets the job done in confidence. No compromises – in no time.

    Bend it to Your Will.

    Adjust to your environment, or force it to adjust to you. It’s your choice. One-thumb opening sliding jaws deliver instant command of the spring-loaded pliers, so you can take control of whatever’s at hand.

    Tags: ,

    8 Responses to “Gerber Center Drive”

    1. TurboMexh says:

      Are the bits normal 1/4″ bits? Because if so I’d buy one. If they’re Gerber proprietary size then I’ll pass

    2. babola says:

      Issued Gerber MP600 hasn’t failed me yet. Will most likely stick to it for now.

      It’s not Center-Drive model but will suffice for my needs.

    3. bill says:

      Is the center axis drive made of metal or plastic?

    4. Taylor says:

      I can’t wait. Wife says she will buy for me 😉

    5. Jim Wallman says:

      Could the sheath maybe hold a small extension and/or flashlight? Thanks

    6. Dean Dalton says:

      Is it “Made” in the USA or simply Asian parts “Assembled” in the USA?