Wallace, ID – Grey Ghost Precision is excited to announce that they have added two additional slide patterns to their GGP-19 and GGP-17 aftermarket Glock slide product line.
The new additions are simply called the V3 and V4, and while they share the same precision engineering and tightened critical tolerances of their predecessors the V1 and V2… they are offering something new to the optics-loving crowd. The V3 and V4 slides feature a hybrid MRDS cut. Previously the V1 and V2 slides were only cut and tapped for mounting the Trijicon RMR. However the V3 and V4 slides now feature a modified optic footprint to accommodate the slightly larger Leupold DeltaPoint Pro. Still want to mount your trusty Trijicon RMR? As it turns out, the DPP and RMR share a similar front profile without the bolt patterns intersecting each other. The primary difference in the footprints are overall length, but GGP resolved this with an ingenious aluminum shim plate for use with the shorter RMR. The result is dual compatibility right out of the box, without the need for bulky adapter plates that raise the optic further above the bore axis. Note: GGP provides three pairs of screws for mounting either the Leupold DPP, Trijicon RMR, or the G10 RMR cover plate (for you iron sight purists). Using the factory-length screws that come with your optic of choice will not install correctly.
As if the optics feature wasn’t enough, the new patterns on the V3 and V4 are worth attention as well. At a quick glance, GGP’s V3 slide would seem to be standard angled serrations. However upon further inspection, the depth of the serrations taper inwards as the cut goes up the slide. This gives you a much more aggressive grip near the top of the slide for press checks and malfunction clearing drills, especially under sweaty, muddy, or bloody conditions. The top of the V3 has shallow cuts that also aid in press checks, while mimicking the design on top of the GGP Glock Barrels.
For the V4 slides, they’ve designed a studded micro-scale texture that provides an unmatched level of frictional grip in any direction of pull. Reminiscent of their V2 slide with “geoscales,” however this pattern is smaller and the little studs within each individual scale provide a much higher level of frictional grip in leu of traditional serrations. The V4 also has a top window cutout presumably for weight balance.
V3/V4 SPECS
- Machined from 17-4 Billet Stainless Steel for tighter-than-factory-tolerances
- Black Nitride coated inside and out for superior corrosion resistance
- Dual compatibility with Leupold DPP and Trijicon RMR with supplied screws and shim plate
- V3 Slide Pattern with tapered depth serrations for varying aggressiveness from top to bottom
- V4 Slide Pattern with studded micro-scales for enhanced frictional grip
- Available for Gen 3 or Gen 4 G19 compatible frames
The Grey Ghost Precision V3 and V4 is available for pre-order now for February delivery. Visit www.greyghostprecision.com for more details.
For a hands on experience, visit Grey Ghost Precision at SHOT Show 2019, Booth #4366
Tags: Deltapoint Pro, Glock, Glock Slides, Grey Ghost, Grey Ghost Precision, Leupold, RMR, Trijicon