SCOTTLOCK™ is an incredibly robust portable security system created to prevent an AR-15 from being stolen while keeping it close at hand. SCOTTLOCK™ was designed by law enforcement officers with tactical situations in mind. Having your AR-15 in a case in your trunk is not helpful when seconds count. Have it with you. Lives depend on it.

The SCOTTLOCK™ is constructed of two steel plates covered with a military-grade polymer coating. Your rifle is sandwiched between a layer of protective foam. When tethered via a cable or chain, the SCOTTLOCK™ minimize the likelihood for theft of the rifle! The SCOTTLOCK™ also prevents manipulation of the trigger, safety, and take down assembly pins (rendering the rifle inoperable). Designed, developed, and deployed by active duty Law Enforcement / SWAT personnel. It will protect all* AR-15’s, without damaging them.

-Made completely in the USA
-Patent Pending
-Fits mil-spec AR-15 rifles (.223 and .556 calibers)
-Weights approximately 4.2 lbs
-Approximately 8.5″ x 3.5″
-Prevents manipulation of the trigger, safety, magazine release, and assembly pins
-Water and solvent resistant
-Works with many different types of locks (keyed, combination, etc)
-Money Back Guarantee
-Lock, cable, and rifle not included 😉

The Team at SCOTTLOCK™ wants to say thank you for your service and show appreciation for the hard work and sacrifice of our first responders and military service men & women. We have created a VIP Program that offers a special reduced price ($169) on our SCOTTLOCK(s)™. This discount program is for all active duty, veteran, and retired military personnel and first responders (law enforcement & fire/ems).

For additional information please visit us at:  www.scottlockusa.com

The EXDPM556 magazines are the latest addition to the MFT Magzine line-up. Over engineered for today’s modern warrior.

Horsham, Pa. (November 2018) – Mission First Tactical, LLC (MFT™), a leader in USA-made rifle/carbine accessories, is proud to introduce the latest addition to the MFT magazine line, the Extreme Duty 5.56 Polymer Magazine (EXDPM556). Designed for the AR15/M4 platform but allowing for use with wide range of non-AR15/M4 platforms.

Manufactured using the newest material technology and processes, the magazines with their next generation long glass fiber polymer construction offer the trifecta of perfection in structural performance; strength, durability and stiffness. The stiffness allows the magazine to maintain its integrity without additional weight with an additional benefit of top performance even at elevated temperatures. The longer length reinforcing fibers produce increased strength and prevents deformation and polymer fatigue. Additionally, the Extreme Duty 5.56 mags offer increased durability through a more efficient energy transfer between the polymer and the longer fiber filaments during an impact. A long-life USGI-Spec stainless steel spring is corrosion resistant. The four-way, anti-tilt, self-lubricating follower keeps the rounds aligned and makes mag feeding consistent and reliable, while virtually eliminating jambs.

Confidence in handling the new Extreme Duty 5.56 mags is a piece of cake, even during weather or duress. The front and rear of the gripping surface is ribbed for a positive grip, even with gloves. An oversized bolt-catch provides enhanced reliability of the bolt-catch operation. The flared floor plate allows for an easier grip in handling and extraction and one-hand reloads. Wrapping up the multiple benefits to the newest addition to the MFT magazine line is a paint dox matrix to allow for easy marking and identification of magazines and the tool-less disassembly with the double floor plate safety release tabs.

Mission First Tactical Extreme Duty 5.56 Polymer magazines are built for hard shooting and extreme treatment and shooting conditions and come with a Lifetime Warranty.

Extreme Duty 5.56 Polymer Mag Specs:
Model Number: EXDPM556
Height: 7.494”
Width: .940”
Length: 2.525”
Color: Black, SDE (Tan)
MSRP: $12.99

For more information on Mission First Tactical, visit www.missionfirsttactical.com.

Founders Edition and Early Adopter Specials

Truly Original

The revolutionary new mechanism is unlike any other charging handle on the market.

We are pleased to receive U.S. Utility Patent No. 9964371, 9810494, 9587896.

No Weak Roll Pins

Even the best-designed products fail at their weakest point and we have taken the infamous roll pins out of the equation. The RACK™ was designed with no roll pins.

Smooth Sliding Latch

Not another pivoting mechanism to wear out the upper receiver notch, this patented latch system slides parallel with the receiver notch for slick and quick release and simultaneously minimizes wear.

Asymmetric Charging

Purpose built with asymmetric use in mind, the RACK™ will handle left or right side pulls with ease. Regardless of your charging handle racking technique, the RACK™ will perform with consistent and positive assurance.

Monolithic Modular Handle

Machined from one single piece of aluminum, the RACK™ handle was designed with strength in mind.

It is also key to the sliding latch and the positive and balanced pull of the charging handle.

MADE IN THE USA

The RACK™ is designed and engineered in the United States.

It is precision CNC machined from billet 7075 T6 Aircraft Grade Aluminum in our brand-new manufacturing facility in Henderson, Nevada.

Coated in a hard anodize black finish.

For immediate release – St. Cloud, MN – Maxim Defense today announced that it has begun shipping its newly designed M-RAX™ attachment system. With the M-RAX attachment system, installation and removal of Picatinny M-Slot Rail Sections is a breeze. Thanks to its spring-loaded screws, the M-RAX™ system removes mounting frustrations and protects from screws protruding beyond traditional M-Slot mounting systems. Merely push the screw in with a standard hex tool and rotate 90 degrees. The locking lugs engage that easily. Gone are the days of fighting with screws, aligning nuts dealing with messy liquid adhesives to create friction. Just push, turn, and tighten down for a secure mounting surface.

Unlike the traditional M-Slot mounting systems, M-RAX™ utilizes the full slot of your rail, ultimately maximizing valuable handguard space. This makes the M-RAX™ system end-to-end stackable, giving you the option to create seamless monolithic rail sections where needed.

The Patent Pending spring-loaded universal interface system eliminates the need to adjust the gap between the T-Nut and accessory to match the thickness of the mounting surface. Just use the supplied hex key (our your own 3/26” key) to push the spring-loaded hardware through the M-slot, twist 90 degrees to engage, release tension and then tighten normally.

M-RAX™ Picatinny Rail Sections are available in both Black and FDE with the following configurations.

Length/weight:
2 • M-Slot (3.145”) / 1.54oz
3 • M-Slot (4.720”) / 2.31oz
4 • M-Slot (6.295”) / 3.09oz
5 • M-Slot (7.870”) / 3.87oz
6 • M-Slot (9.445”) / 4.62oz

The M-RAX™ attachment system is available for licensing and sold throughout Maxim’s dealer network.

www.maximdefense.com