At SHOT Show stop by Booth #20605 where US Tactical Supply will demo the LAW Tactical AR Folder on this Integrally Suppressed AR-10 was well as other new products.
Archive for the ‘weapons’ Category
US Tactical Supply to Demonstrate LAW Tactical AR Folder at SHOT Show
Sunday, January 11th, 2015The ALG Defense 6-Second Mount Is Finally Here!
Friday, January 9th, 2015
The ALG Defense 6-Second Mount was designed when a counter-terrorism unit approached ALG with a strict set of criteria. When entering a linear environment, such as an airplane or bus, the team’s primary weapon was their pistol and they were looking for a fast sighting method that was rugged and robust. Red dot scopes mounted directly to their pistol slides were showing a high failure rate, due to extreme acceleration or deceleration of the slide. The balance of the pistols was thrown off from the rearward scope mounting position, and the slides were weakened from machining a pocket for the scopes into the top of the slide.
The name, 6-Second Mount, comes from a description used by one of the operators: “The fight lasts 6 seconds… Either they’re dead or you’re dead, and aggression saves the day.”
Mounting an optic to your weapon decreases engagement time, allowing for faster and more accurate hits on target. By separating the sight from the reciprocating slide it allows the pistol to function properly without the added mass of the optic sight, producing a favorable weight distribution.
The ALG 6-Second Mount in machined from 6061-T6 aluminum and designed to fit Gen 3 Glock 17, 22, 24, 31, 34 and 35.
MSRP
Black: $250
DDC: $265
ALG Defense – Sidewinder Muzzle Brake
Friday, January 9th, 2015
ALG Defense’s new Sidewinder muzzle brake is machined from 17-4 Stainless Steel and fits ½”-28 threaded 5.56mm barrels. The vents are angled upward at 3 and 9 o’clock deflecting gas to the sides, away from the ground, reducing dust and debris when firing from the prone position. The vents are larger on top than on the bottom which minimize the muzzle rise of the ALG Sidewinder. The unique design reduces muzzle rise and recoil, allowing the shooter to quickly get back on target for rapid follow up shots. The ALG Sidewinder includes a peel washer for proper timing and concentricity during installation. Available in both Bright Polish or Black Nitride finish.
MSRP: Nitride: $75
Bright Polish: $85
New Products from Geissele Automatics
Friday, January 9th, 2015
The Super Reaction Rod was designed to fulfill the need of an advanced armorer who frequently works on AR15/M4 platforms with over torqued, seized or Loctited barrel nuts. The Super Reaction Rod works by pre-loading the barrel extension lugs to the lugs of the Super Reaction Rod to eliminate movement created by adding torque to the barrel nut while at the same time fixing the upper receiver in place. Having the barrel extension mated to the Super Reaction Rod lugs and fixing the upper receiver before torqueing will remove stress that could be placed on the index pin. This allows the armorer to place tremendous torque on the barrel nut to assist in breaking seized nuts loose. The Super Reaction Rod’s pre-loading system can also be removed to allow it to work just like a standard Reaction Rod, which allows upper work to be performed in a 360° both vertically, and horizontally.
The Geissele Reaction Block is designed to aid in the assembly of lower receivers. Once the armorer has installed the buffer tube onto the lower; the buffer tube and lower receiver assembly can be slid into the Reaction Block at the 12, 3, 6 and 9 o’clock positions. This allows the armorer to rotate the lower in 90 degree increments in the block simply by loosening the provided nylon screws, removing the lower, and sliding it back in at the desired orientation. The Reaction Block provides an ultra-stable platform for performing an array of lower receiver operations, as well as making the installation of the buffer retainer nut quick and easy. All while keeping both hands of the armorer free to work, saving both time and frustration.
MSRP: $99
Deliberate Dynamics Branded Wiebads In Stock
Thursday, January 8th, 2015The Wiebad line of products is used for positional stabilization of firearms. Deliberate Dynamics branded models are available in three configurations.
Approximate size: 8″x5″x1.25″. – Approximate weight: 3.6 ounces
Dimensions: 9” x 11” x 7” Weight: 1lb 4oz
A shooting bag made to be used for barricades on the strong side elbow. Built at the request of Todd Reynolds of Rock Solid Stocks, who wanted a pad to set your elbow on to help stabilize you elbow sitting on your knee. Current version has modifications to the original product allowing further versatility by making the bag size adjustable. Dimensions: 9” x 11” x 4” Weight: .5 lbs
Available in Coyote, OD Green, Kryptek and MultiCam.
www.deliberatedynamics.com/brands/wiebad
Magpul Releases New Products
Thursday, January 8th, 2015
The MBUS Pro LR offers many similarities to the existing MBUS Pro Rear, however it includes a tool-less elevation adjustment wheel to the sight arm. This wheel utilizes positive detents for 200-600 meter ranges in 50 meter increments.
The M-LOK Paraclip Sling Mount is the M-LOK compatible variant of the older MSA – MOE Sling Attachment. It’s made of Melonite-treated steel for resistance to wear and corrosion, and utilizes two M-LOK T-Nuts for a solid mount to M-LOK handguards and forends. Designed for use with clip style sling attachments such as the Magpul Paraclip.
The QDM Quick Disconnect Sling Swivel is Magpul’s take on the common push-button QD swivel. Made from Melonite-treated steel, the QDM is, according to Magpul, stronger than its contemporaries and offers improved corrosion and wear resistance. The dual side release tabs are designed to be easier to use than the traditional top-button design while still being secure against inadvertent activation. This also gives the QDM body a shorter length for better clearances when used with end-plate mounts.
All three of these products will begin shipping the week of SHOT Show.
Introducing the SF Ryder 9-Ti
Thursday, January 8th, 2015
Model: SF Ryder 9-Ti
Threads: 1/2-28 or M13.5X1
MSRP: $799.00
Launching: SHOT Show 2015
Specs:
9.5oz with piston
7.6″ with piston
Titanium tube, front plate and rear cap
Stainless steel baffles
1.25″ tube diameter
Federal 147 Hydra Shock 131 dB
Federal 124 FMJ American Eagle 131dB
Cerakote Black, FDE or Grey
You’ll also notice the Surefire/Zev custom match grade threaded Barrel. Available for Glock 17 & 19, look for these at SHOT Show as well.
WeaponsMan.com – A Blog I Like
Monday, January 5th, 2015Written by an SF Weapons guy (pre-18 series), WeaponsMan is a blog about weapons. It’s that simple. I’ve started reading the content and I like it.
Check it out. In particular I recommend the two part series, “The Big Lie About Wanat (COP Kahler).”
