Wilcox BOSS Xe

Posts Tagged ‘Osprey Armament’

Osprey Armament Updates Us On Mk 36 Progress

Tuesday, October 28th, 2014

Osprey Armament updated us on the status of the LOSOK Custom Arms Mk 36 that we fired earlier this year. It’s an interesting rifle that combines aspects of the M1 Garand’s rotating bolt with the AR-style lower we are all accustomed to.

IMG_8693.JPG

We fired the Gen 1 prototypes, but they are now up to Gen 3. So far, they’ve assembled two Gen 3 models and they are getting ready for final assembly for the next two prototypes. After testing, they are scheduled to machine the first production models from billet some time in early November.

Osprey Range Day – Ohio Ordnance Works M240 Semi-Auto Trigger Pack

Thursday, February 13th, 2014

OOW Semi-Auto Trigger Pack

In addition to the HCAR, Ohio Ordnance Works also had their M240 Semi-Auto trigger Pack available at the Osprey Range Day. The M240 Select Fire is a direct replacement trigger pack for all MAG and M240 variants which allows the machinegunner to switch between semi and full-auto fire. This increases the versatility of the M240, by allowing the machinegunner to place more precise shots while not wearing down on the sear. Additionally, it becomes much easier to zero in the weapon when set to semi-automatic.

www.ohioordnanceworks.com/parts/m240-select-fire-1/m240-select-fire

Osprey Range Day – LOSOK Custom Arms Mk 36

Thursday, February 13th, 2014

The LOSOK Custom Arms Mk 36 rifle debuted at SHOT Show 2014 with Osprey Global Solutions. The Mk 36 consists of a rotating bolt, M1 Garand-style action upper mated to an AR-style lower. It is important to note that the Mk 36 is currently in a prototype phase.

The upper receiver of the Mk 36 was manufactured using Direct Metal Laser Sintering (DMLS) by Solid Concepts Inc., the company that manufactured the world’s first 3D printed metal gun. The Mk 36 receiver is quite possibly the first ever 3D printed rifle receiver in the USA, if not the world.

photo

The lower receiver and foreend are both carbon fiber reinforced polymer. Due to the AR-style lower, the Mk 36 is compatible with standard AR fire control parts and furniture. The rifle is only 8 1/2 lbs unloaded.

The model featured in the video is chambered for .30-06 and is capable of a 1500 yard range with proper ammunition. It is loaded using 20-round box magazines.

Another prototype chambered for 5.56 was also available for viewing at the event. It utilized a modified Mini-14 receiver and was completed in only 10 days, just in time for the Osprey Range Day.

The Mk 36 will be marketed and produced by Osprey Armament.

www.ospreyarmament.com

Osprey Range Day – MMC Armory PDW 7

Thursday, February 13th, 2014

MMC Armory is a division of Mennie Machine Company, located in Mark, Illinois. They have decades of experience manufacturing parts for the auto industry and have put their expertise towards manufacturing rifles and accessories.

The MMC Armory PDW 7 is designed for CQB operations. The upper receiver is machined 7075 T6 aluminum alloy and hard coat anodized, with indexing marks and M4 feed ramps. The lower receiver is also machined 7075 T6 aluminum alloy and hard coat anodized, with a flared magazine well. The barrel is 4150 CrMv nitride treated steel and features a 1:7 twist, with a pistol length gas system and M4 extension. Chambering is available for both .223/5.56 and .300 BLK.

PDW7-2

The trigger is an enhanced nitride treated Mil-Spec single stage, creep adjusted with polished engagement surfaces and a crisp 5 lb. break. The bolt carrier group is full auto rated with a staked gas key. The PDW 7 is capable of 700-800rpm when fired full-auto.

All moving parts from the bolt carrier group to the collapsible wire stock on the PDW 7 are coated in Nickel Boron for lubeless operation.

It is currently available through Osprey Armament.

MMC Armory Catalog

Click to view .pdf

www.mmcarmory.com

ospreyarmament.com

Osprey Range Day – Heavy Counter Assault Rifle

Thursday, February 13th, 2014

Back in November, we introduced you to the Ohio Ordnance Works HCAR – Heavy Counter Assault Rifle. At the time, we believed that the weapon was called the Heavy Combat Assault Rifle, but this has since been corrected for us. Since November, OOW in conjunction with Osprey Armament has been hard at work making improvements to the design. Remember, the HCAR is based on the .30-06, M1918 Browning Automatic Rifle which weighed in at almost 20 lbs. This modern version has shaved the weight down to 12 lbs.

HCAR

The Heavy Counter Assault Rifle manufactured by Ohio Ordnance Works is a modernized rifle based on the Browning Automatic Rifle. Chambered for .30-06, the HCAR allows the operator to consistently and effectively engage targets out to 900 meters, lending to its naming as a ‘Heavy Counter’ rifle. It utilizes proprietary 30-round magazines manufactured by OOW.

HCAR

The updated model featured at the Osprey Range Day had a new, adjustable trigger system between 3.5 and 7 lbs. It also featured a new bolt hold open system. The button magazine release on the older model has been replaced with a lever release, similar to an AK or FAL. The HCAR also features an ambidextrous bolt close switch, located on either side of the magazine guide.

HCAR

The HCAR that we fired in November retained the original WWI-era selector switch which in the modern age, is less than ideal. I was pleased to see that it now features a modern safety selector with a short 45 degree throw.

HCAR

The 16″ barrel is “dimpled” with ovals to help reduce weight and improve cooling by offering additional surface area. This model also had an AAC flash suppressor and could accept the AAC suppressor. Like on the original BAR design, the HCAR has an adjustable gas port. You can also see the integrated Mil Std 1913 rails for sights and accessories.

HCAR

The model featured at the Range Day did not feature the new folding charging handle, although it will be available when full-scale production starts.

It will be available later this year through Osprey Armament.

www.ohioordnanceworks.com

ospreyarmament.com

Osprey Range Day – Introduction And Overview

Thursday, February 13th, 2014

We were recently lucky enough to be invited to a range day sponsored by Osprey Armament – in association with Defense Logistics Support and PWT3 Development. This “Overmatch Concepts” Range Day was held at the Osprey Range located in Council, North Carolina. Our host for the day’s events was Retired US Army Major General David Grange, head of Osprey Global Solutions and a legend in the Ranger community.

The event kicked off with the usual admin brief for range safety and MEDEVAC plans along with the facility layout. Then, General Grange jumped right into a brief overview of the day’s events, which included an operational vignette, weapons demonstrations, and round robin group visits of products and services from partners of Osprey Global Solutions.

As it turns out, the day was set to be filled with a wide variety of technologies ranging from low to high tech. In addition to weapons there were ISR capabilities including trackers and forensic evidence collection as well as medical, and training demos. While some of it might seem old-hat, the attendees included military, LE, first responders and industry. Everyone saw something new.

The Operational Vignette was a scenario involving a raid on a terrorist bomb making element that has infiltrated the area of the Cape Fear river, represented by the buildings down range. A tracking team confirmed the location of the bomb making element, and passed the information along to an assault team who took down the building. Afterwards, an EOD team disarmed the explosives while a rescue team stood by to provide rescue and medical services as needed. It was constrained by both time and the limits of the facility but included examples of a wide variety of the “Overmatch Concepts” that were the point of the entire day.

DSC03266

One thing I noticed was a lot of work on battlefield obscurants. Long a bailiwick of the military engineer community, it was refreshing to see a renewed effort on their application for some more non traditional roles. MSI Delivery Systems was on hand, supplying obscurants via their AB2K Multi-Mission Aerosol Delivery System. The standalone version of the AB2K-MMADS is capable of dispensing up to 50,000 cubic feet of smoke coverage per load. A dependent version with a high capacity backpack can dispense over 320,000 cubic feet of smoke coverage. Additionally, the AB2K-MMADS can easily be configured to dispense smoke mixed with irritants for crowd control, or specialized chemicals for uses such as decontamination and infestation control.

There was also a team on hand using a remote control plane as a UAS surrogate investigating the aerial delivery of battlefield obscurants. Although it took a few runs for the effect of the test obscurant to become noticeable, testing is ongoing, and from what we’ve seen so far the system does have promise.

DSC03282

Additionally, the obscurant used at the range was water based; an oil-based obscurant is also being tested.

Look for several more stories today which provide details of some of the weapons we encountered. We’d like to once again thank MG Grange and his team for their hospitality and for setting up a great program.

ospreyarmament.com

Osprey Range Day – Overmatch Concepts

Friday, January 10th, 2014

Osprey Range Day Invite (1)

I attended the premiere range event hosted by Osprey Global Solutions and Defense Logistics Support. You may recall my story on the HCAR, a modernized BAR. Osprey boasts a great facility nestled east of I-95 about 45 minutes from Fayetteville, North Carolina. Boasting 25m out 1400m range access, the facility is the brainchild of Retired Army Major General David Grange who heads up Osprey.

Osprey Range Day Invite (2)

Below, you can see some shots from the last range day when Osprey hosted about 50 military and law enforcement personnel as well as members of industry. In addition to a variety of weapon solutions offered by Osprey Armament, we also were introduced to new forensic evidence collection systems as well as the actual range complex itself. This next even will boast even more with the introduction of UAVs, medical systems and tactical training technologies. Expanded to two days, it gives additional opportunities for attendance and hands on experience with the systems on display. Additionally, lunch is provided. See you there!

If you are going to be in the area and are interested in attending send an to email Steve from OSPREY at sperry@ospreyglobalsolutions.com or Trevor Kräcker with Defense Logistics Support, Inc. at tk@defenselogisticssupport.com. It is imperative that you email for a reservation as it is by invitation only and you will not be given entry without being on the list.

www.OspreyGlobalSolutioms.com