SureFire

Archive for the ‘Weapon Accessories’ Category

Mounts Plus – M240 Bullet Bag

Saturday, June 23rd, 2018

Officially called the Balanced Ammunition Delivery System (B.A.D.S.), it will work with the FN MAG/M-240 and the German MG3 machine guns.

BADS accommodates up to 125 rounds of ammo to be easily loaded by the gunner within ten seconds while in a standing or sitting position. This increased ammo capacity enables the gunner to engage the target for up to 150% more time on target while on assault, on patrol, or in a hasty defensive position without a need to change the ammo box. Rather than placing the weight of the ammunition to the side of the weapon, BADS puts less stress on the operator and the M240 system. Additionally, unlike legacy ammo boxes, the ammunition deflection plate ensures spent cartridges are ejected away from the gunner.

www.mountsplus.com/blog/balanced-ammunition-delivery-system-b-d-s-fn-magm-240-german-mg3-machine

Hog Saddle – PIG0311-GS SHORT Tripod

Thursday, June 21st, 2018

This is Hog Saddle’s new PIG0311-GS SHORT tripod which is specifically for coyote and deer hunters who primarily hunt from sitting & kneeling positions. This SHORT tripod packs smaller and sheds a pound of weight, compared to the standard PIG0311-G full size tripod model.

If you don’t anticipate taking a standing shot on an animal, then there is no need to carry a larger/heavier tripod. Pack light, pack smart.

Folded length 19.75″

Extended length 39.5″

26lbs load rating

Weight 4.75 lbs

www.hogsaddle.com

Warren Innovative Technologies

Wednesday, June 20th, 2018

New from Warren Innovative Technologies is the Strap Wrench Adapter for Dead Air Wolf-9SD/Ghost suppressor mounts.

The Dead Air Wolf-9SD/Ghost Mount Strap Wrench Adapter allows the use of two strap wrenches to be used in opposite directions without damaging the finish on any of the suppressor’s components. So far, they’ve been unable to break one of these adapters. Strap wrenches are sold separately in finer hardware stores.

Each adapter is $20 shipped when purchased by itself and $15 when purchased with a $35 Mount Wrench.

Private message them on Facebook for ordering details.

GDI Launches New Website

Monday, June 18th, 2018

Manufacturer to Celebrate Launch with Limited Time Discount on Favorite Products
June 18, 2018 – Global Defense Initiatives (GDI), manufacturers of mount interface devices for use with day optics, red dot sights, laser aiming, illumination, night vision and thermal imaging systems, has announced it has launched a new website. Live now; the new site features a sleek, user-friendly layout, providing easier navigation and searches, as well as detailed product information, videos and images.

The new website, www.GDIEngineering.com, is designed to speak to the consumer, providing functionality and interactive use. The site helps to make the user experience easier by highlighting specific components and benefits with each product.

“We are thrilled with the launch of our website,” stated Marco Gonzalez, GDI’s founder and CEO. “GDI maintains an unwavering level of perfection, with every product that goes out the door; and this site further demonstrates our commitment to making each of our customers happy. The upgraded features and streamlined look will allow our customers to easily find the products they want, based on their need and experience.”

In celebration of the new launch, GDI will be offering eleven (11) of their mount models at a 20% discount for sale, on a first-come, first-serve basis, with a limited quantity of twelve (12) per part numbers shown. The promotion will run today through July 8th, based on availability.

Products Included in Promotion
Rifle Scopes
· P-ROM L-Model™ (Rifle Optic Mount)
· 30mm Tube 0 MOA BIAS P/N: PRL3000
· 30mm Tube 25 MOA BIAS P/N: PRL3025
· 34mm Tube 0 MOA BIAS P/N: PRL3400

Aimpoint Micro Series / Vortex Sparc
Absolute CW P/N: MT5M
Lower 1/3 CW P/N: MT6M

Trijicon ACOG & VCOG
R-COM E-Model™ (Combat Optic Mount) P/N: RCME
V-COM L-Model ™ (Combat Optic Mount) P/N: VCML

Trijicon RMR Series
Absolute CW P/N: MR5M
Lower 1/3 CW P/N: MR6M

Trijicon MRO Series
Absolute CW P/N: MS5M
Lower 1/3 CW P/N: MS6M

Visit, www.GDIEngineering.com and enter COUPON CODE: WEB20. Celebration Special items shown above are IN STOCK, and will ship USPS PRIORITY in 7-10 business days.

GDI’s ruggedized mounts are designed to improve accuracy and marksmanship in the harshest field use and environmental settings. In serving those who serve, GDI has gained a reputation in the defense community by building optic mounts that exceed military specifications through their precision engineering, manufacturing, and quality craftsmanship standards. GDI’s combat proven products are available to all shooting sports enthusiasts.

Victory First Launches Featureless GLOCK Slides

Thursday, June 14th, 2018

Victory First has opened up pre-orders for their Featureless GLOCK slides. Wait, what? Featureless GLOCK slides? It seems like everyone offers a proprietary cut for their GLOCK compatible slides. Instead, Victory First decided to introduce a slide which could serve as a blank canvas, allowing the user to either customize the slide on their own or have a machine shop do it for them.


Made from 17-4PH Stainless Steel, they are cut to the exact specifications of a factory GLOCK slide, minus the serrations. These fit GEN 1-3 components. They’ll also fit common holsters, as-is.

You will not be charged until the item ships, but they expect to ship individual orders in 6 weeks.

victory-first.com

Samson Manufacturing Adds a New Finish for Its’ Most Popular Handguard

Wednesday, June 13th, 2018

Samson Manufacturing, a leader in firearm accessories, introduces a new finish for their M-LOK SXS Series 15″ and 12″ handguards.

Responding to public demand, Samson will now be producing versions of their handguards in Type III Class 1 Anodized Pre-Ban Gray.

“The difference between Class 1 and Class 2 hardcoat anodizing is the removal of the black dye.

Our Type III Class 1 finish results in a light gray color that is both distinctive and visually pleasing” said Samson spokesperson Dave Biggers.

For more information or to order visit here:

www.samson-mfg.com

Proof Mark – Muzzle Stand-off Device for the Glock 19 & 23

Tuesday, June 12th, 2018

Proof Mark LLC is a veteran owned firearm accessories design and manufacturing company located in the Pacific Northwest. They recently released their Muzzle Stand-off Device (MSD) for the G19/23. Project development began in October of 2015 and concluded in Spring of 2018.

img_1286.jpg

The design intent originates in part with the Battle of Qala-i-Jangi where an SFOD-A, after expending their ammunition, had to defend their position using their empty weapons in hand-to-hand combat.  Another source of inspiration was a special mission group in Slovakia, where there were several reports of Glock slides coming out of battery due to muzzle contact.  The MSD has utility in kinetic operations and as well as CCW. FBI statistics show more than half of law enforcement firefights take place at distances of 0 to 5 feet.  When in close contact with an assailant the MSD prevents the slide from being pushing out of battery.

The MSD body is machined from billet 7075 aluminum and the glass break is 17-4 stainless.

4A90DE6E-F558-4894-AF73-EEF36346E007

The locking mechanism consists of a Patent Pending 303 stainless locking block which fits within the profile of the STANAG 4694 rail and allows for tool-less removal.

6D49DD9E-CF9D-4457-800C-325C45CDEFC3

The MSD went through extensive testing which revealed two primary design obstacles; gas management at the muzzle and frame fitment.  First, capturing excess gas behind the stand-off device generates a tremendous amount of force on the pistol dust cover and this can lead to material fatigue.  This challenge was overcome with the use of proper venting.  Second, inconsistencies of Glock dust covers between generations and even within a single generation made universal fitment difficult.  To overcome this obstacle, balance was struck between critical dimensions to achieve a good fit on Gen3/4/5.

With solutions engineered and production eminent, Glock released their new Gen5.  This extended the development cycle as the slides of the Gen5/19X are longer than prior generations which caused interference with the back of the MSD.  This was overcome by recontouring the back of the MSD.

Prior to public release, the MSD went through a year of testing within one of the military’s special mission groups with positive feedback.

The MSD G19/23 fits the Safariland 7TS G17/22 XC1 holster.  Look for the following first eight digits: 7378-8322-XXX.  The last three digits indicate right/left hand configuration.

CFC24B71-DB77-4768-9AC2-C3D42EB25447

3B2D6C14-DFB5-43EE-983A-C7232A0658F1

Variants of the MSD for the G17/22 and G34/35 are forthcoming.

The company website is: www.proofmarkllc.com.Facebook: www.facebook.com/proofmarkllc

Instagram: @proof_mark

Pimp Your 416 with Maxim Defense

Monday, June 11th, 2018

I have been remiss in writing about the accessories Maxim Defense has created for the HK416. I first ran across this company at AUSA in 2017. Since their initial products were going straight to the civilian AR market I pay as much attention to them as I should have. Maxim Defense is working very hard to become a serious player in the small arms market. One area they’ve placed emphasis on is the HK416.

A8CFB053-87AB-438A-89FF-B8DF7D036F48

You could already mount their collapsible PDW stock to the rifle, but they designed a new rail for the platform called the mDX. Available in 7.25″, 9.25″, and 12.65″ lengths, it incorporates M-LOK slots. The QD slots are on 45 Deg.

E7281060-F60A-412B-A647-CF475A3B574D

Additionally, you’ll note the scoop at the business end. There are short and long scooped models with the longer scoop intended to keep the thumb back away from the really hot bits for those who shoot with the thumb over rail technique.

Finally, Maxim Defense is supposed to be introducing 416 lowers.

www.maximdefense.com