FirstSpear TV

Archive for the ‘weapons’ Category

Patriot Ordnance Factory Releases New ReVolt Rifle

Thursday, October 23rd, 2014

Patriot Ordnance Factor has announced a brand new bolt action rifle, the ReVolt. Available in light (.223/5.56) and heavy (.308/7.62) chamberings, the ReVolt is completely legal for purchase in all 13 original colonies. The full release can be read below:

POF-USA RELEASES NEW RIFLE CONFIGURATION…A BOLT GUN, LEGAL IN ALL 13 COLONIES

ReVolt 1

PHOENIX, AZ (October 2014) — Patriot Ordnance Factory (POF-USA) continues with an American Revolution in Innovation and brings out the ReVolt™.  A new bolt action rifle, available in light (.223cal / 5.56mm) and heavy (.308cal / 7.62mm) variations for your shooting demands, which is legal in all 13 original Colonies.

These rifles feature a 14.5” M-LOK compatible handguard with 18.5” nitride heat-treated, deep fluted barrels.  New to the market is the ReVolt™ action; a straight pull only action with feed assist chambering of the next round.  The lightweight and popular Luth-AR buttstock is a standard feature on the new line.

ReVolt 2

POF-USA has maintained a focus on modularity – not only in the rifles, but also the accessories.  The bolt action handle on the ReVolt™ models can be used as a tool for tightening and removing scope mounts and rail accessories.  Muscle memory skills are virtually the same for this platform as a standard POF rifle, and all ambidextrous controls found in our Gen 4 series rifles are found in this loaded package. In addition to all of the fine features in our rifles, the ReVolt™ models also feature our E² extraction technology.  E² extraction is a patented feature of four channels along the neck of the chamber.  The channels allow gas pressure to flow backwards and push on the shoulders of the spent casing resulting in extractor life of 5X that of a standard extractor due to the push / pull action.

The ReVolt™ top end is available as a separate purchase and ships with a 10 round magazine and capture pin. This capture pin replaces the front pivot pin, permanently attaching the upper receiver to the lower receiver while maintaining the ability to “shotgun” the rifle for maintenance. The capture pin was essential in our quest to innovate a magazine fed, AR style, bolt action rifle that qualifies for ownership in all 50 states.

ReVolt 3

You can hunt with the ReVolt™ as a stand-alone weapon system or install the complete top end on your already existing mil-spec (.223cal / 5.56mm) lower half to maintain the legality necessary in owning an AR style rifle in many of the Colonies.

POF-USA accepts no compromise in the building of our product.  Our line of rifles and accessories are “Patriot” designs.  We will only produce that which is tough, accurate, modular, durable and true. This patriotic mission is brought from passion, authenticity, trustworthiness, rebellion, independence and objectivity. 

ReVolt … Will You?

www.pof-usa.com

Magpul – Rolling Out Additional M-LOK Accessories

Thursday, October 23rd, 2014

Magpul keeps rolling out the M-LOK Accessories with several new items.

M-LOK Polymer Rail Sections

M-LOK Rail Sections

M-LOK to MOE Adapter Kit

M-LOK to MOE Adapter

M-LOK Polymer Cantilever Rail/Light Mount

M-LOK Cantilever Mount

M-LOK T-Nut Replacement Set

M-LOK Replacement T-nut set

store.magpul.com/category/M-LOK

IWI Galil ACE In 7.62×39 To Be Released For US Market

Thursday, October 23rd, 2014

ACE 1

Military Arms Channel, through their Facebook page, revealed that IWI will be importing the Galil ACE in 7.62×39 for the US market. It will initially be available as a pistol with a side folding SB15 brace starting February 2015. Pictured is the SBR variant that the pistol will be based on.

ACE 2

It was also mentioned that IWI will be offering a 16″ barreled variant a month later in March.

Stay tuned for further details as they are revealed.

All pictures and information came from the Military Arms Channel Facebook page: www.facebook.com/militaryarms

www.iwi.us

Crosman – Benjamin Armada PCP Air Rifle

Thursday, October 23rd, 2014

rifle-1

The Benjamin Armada is a .22 caliber pre-charged pneumatic rifle which features a Magpul M-LOK modular accessory system forend. According to the manufacturer, the Armada is the first commercially available PCP rifle that “allows shooters the same breadth of modularity and user configurability as enjoyed by the AR community.” It achieves this through the aforementioned M-LOK forend, as well as designing the rifle to Mil-Spec dimensions for the grip and stock interfaces.

The Armada is capable of delivering velocities of up to 1000 FPS with 32 foot pounds of energy. Included is a 10-shot magazine. The rifle features full suppression, and is capable of 30 shots per fill. The receiver has a machined Picatinny rail, and the bolt is reversible for left-handed shooters. Also included is an on-board gauge and two-stage trigger.

Unfortunately, the images aren’t showing the production model. Rather, it’s a special one-of-a-kind model that’s currently up for auction on Gunbroker through November 2nd, with the proceeds going to benefit the Navy SEAL Foundation. The package contains:

– Magpul M-LOK Modular Locking System
– Magpul PRS (Precision Rifle / Sniper) adjustable stock
– Magpul MBUS Pro Sight front and rear
– Magpul MIAD GEN 1.1 Grip Type 1
– Magpul M-LOK Cantilever Rail / Light mount
– Surefire Scout weapon light
– Tarjac Multi-Cam finish
– Zeiss TERRA 3x 4-12×50 mm scope
– Telescoping bipod
– 3 removable/configurable, M-LOK compatible handguards
– Custom embroidered Benjamin rifle case

The Armada is built in America.

For more information on the Benjamin Armada, and the auction, visit www.crosman.com/nsfauction

Strohman Enterprise – Buy An Aimpoint Micro, Get A Free Mount

Tuesday, October 21st, 2014

18

Strohman Enterprise is offering a special deal for Aimpoint Micro sights. Purchase either the T1, T2, or H1 through Strohman, and receive one of several mounts at no additional charge. The Sampson mount comes with a combat optic tool and free shipping. The other mounts come with an offer for flat $10 shipping.

www.strohmanenterprise.com

Airtronic USA – MK 777 Lightweight Rocket Launcher

Tuesday, October 21st, 2014

IMG_8271.JPG

At AUSA we got to take a look at the new MK 777 lightweight RPG launcher from Airtronic.

Click to view .pdf
Full page photo

www.airtronic.net

SIG SAUER Gives Us A Look At Their Modular Handgun System Candidate

Tuesday, October 21st, 2014

FullSizeRender

At AUSA, SIG SAUER‘s Kevin Brittingham walked us through their candidate for the Army’s Modular Handgun System program which may replace the M9 Pistol issued since the mid-80s and based on the Beretta 92F.

IMG_8285

Although based on the commercially available P320 modular pistol, SIG made a few changes to be in compliance with the Army’s requirement.

-Tan Color
-Ambi Thumb Safety
-Lower Profile Ambi Slide Release
-Loaded Chamber Indicator
-Trigger Boot
-Firing Pin Assembly

IMG_8286

Although SIG is very optimistic about their chances, they also look at programs like this as an opportunity to improve their firearms. Some of these changes may we find their way into the P320 and other SIG firearms.

IMG_8283

EOTech Is Discontinuing The Integrated Fore-End Lights (IFL) Product Line

Tuesday, October 21st, 2014

EOTech has announced to all distributors that they are discontinuing the Integrated Fore-End Lights (IFL) product line, citing an inconsistent supply of materials from their vendors. The full release can be read below:

October 20, 2014

Dear EOTech Distributors:

This letter is to inform your company that EOTech is discontinuing the distribution of its line of Integrated Fore-End Lights (IFL). The discontinuation will include all models and sku’s, for both the Mossberg 500 and Remington 870 firearms. Effective immediately, all existing purchase orders in EOTech’s system will unfortunately be canceled. We are giving notice of these product changes in order for your company to adjust its product purchasing records and close any orders that are pending.

We request that you carefully review these changes and notify your buyers so no future orders are placed. Additionally, effective immediately, MAP restrictions will be lifted to assist you in the movement of current inventory.

Warranty and customer service inquiries regarding the product line will continue unchanged per the L-3 Warrior Systems/EOTech contact information provided in the product literature.

If you have questions and would like to discuss the changes noted above or if you need information about adding new products to your program, please contact your EOTech sales representative directly and they will provide additional information and options.

The decision to exit this business was due to the inconsistent supply of materials from our vendors. We appreciate your understanding and assistance in helping us, help you, minimize the impact of this product discontinuation on your company. We would also like to thank you for your continued support and success of the EOTech product line.

www.eotechinc.com