Colt

KCRF Patches Available for Sale

March 24th, 2013

20130323-163819.jpg

Our friends at Mojo Tactical havebKeep Calm and Return Fire™ patches in stock. Get yours while you can.

www.facebook.com/MojoTactical

Gunfighter Moment – John McPhee

March 23rd, 2013

Shrek’s Ten Warrior Commandments

20130323-122702.jpg

I. CRUSH YOUR ENEMY TOTALLY

Leave no room for doubt. Kill them, then kill them twice to be sure, then check and make sure they are dead. Crush your enemy. Do not pass go, do not collect $200. This is not a James Bond movie where your enemy spills his guts and then gets away. Do not waste one word. Kill them and make sure they are dead. If they aren’t dead, they will seek revenge. Crush them not only in body and spirit, but take their will to fight. This especially includes warriors with no honor.

II. LEAD BY EXAMPLE

If it’s time to get your kill on, then start killin’ first. If you need to get through gunfire, get through the fire first. If you lead the way, this tells other warriors that if they want to get a kill in today, “You better beat me!” It tells your soldiers that if they want to prove themselves as warriors, they need to be on their “A Game” just to fight by your side.

III. TREAT EVERYONE EQUALLY

As a warrior, remember who got you to the dance. That vehicle didn’t fix itself. That weapon works because of your armorer. Spend time with those around you. Get to know everyone personally. This will ensure that in any situation, everyone that surrounds you will give you personally 110 percent.

IV. PLACE YOUR FULL TRUST IN NO ONE

You can trust a friend, as long as he remains honorable. But a warrior’s friend today might become his enemy tomorrow. Those who worship you today have envy, and will stain your armor and break your sword if given the chance. When the time comes, you will know who has honor, and honorable warriors will always forgive, for they understand your actions as a warrior.

V. TAKE CARE OF THOSE UNDER YOU

Defend your subordinates to the bitter end. Defend them against any and all friends, enemies and warriors. Let it be known to anyone under your control or aligned with you, that you will kill for your warriors if anyone else tries to test your territory or boundaries. This tells others to come to you first; because you rule your warriors. Other honorable warriors will understand this and want that same respect in return. Your subordinates will feel protected and go to the ends of the earth for their master.

VI. TRAIN EVERYONE TO BE THE MASTER

It’s every warrior’s job to want to be the master. From day one with your pupils, you’re training them to be the master. Withhold no information, no skills, nothing back from them. Give them everything they need personally to become a master. If you have 5 masters, versus 1 master and 4 pupils, this will strengthen your force. Honor will keep the balance of power for you, if you are the true master.

VII. LET YOUR WARRIORS SOLVE THEIR OWN PROBLEMS

Always let warriors solve their own problems or conflicts. If it’s between warriors, let them go. Watch every move they make to ensure the problem gets fixed and no one gets killed. There will always be problems. As the master, watching this will show you if the problem was fixed, or if your warriors have a problem with honor.

VIII. ALWAYS LET YOUR PUPILS TAKE THE CREDIT

When fighting another master or formidable enemy, always let your pupils have the final killing blow while you watch. This is the biggest form of dishonor to anther master. Being crushed by warriors of lesser stature will haunt him for eternity.

IX. NEVER WASH YOUR ARMOR

Savages always smell like scum. They will always bring their families to a gun fight. This includes babies and small children. If you don’t wash your clothes, you will smell like a savage, and if handling savage babies they will not cry. Babies use smell to identify who you are, friend or foe, so smell like a savage.

X. DO NOT FIGHT IN ANOTHER MAN’S PANTS

Know where your own kit is and use it! Messing around with another warrior’s gear is against any warrior code. This is viewed as hiding another warrior’s sword, and he won’t know until he is in battle. This is a sure way to get yourself beheaded, and this is not an honorable death between warriors.

#######

20130222-202137.jpg
SGM (ret) John McPhee served a distinguished career in U.S. Army Special Operations for over 20 years, retiring in 2011.

John has spent his adult life in Special Operations and Special Mission Units. He is a Master Instructor in all aspects of special activities, missions and operations. He has over 6 years of private special activities consulting and is a Subject Matter Expert (SME) in: Special Activities, Operational Preparations, Limited Signature Operations, Reconnaissance, Singleton Operations, High Threat Dignitary Protective Services, Extreme Long Range, Designated Marksman, Advanced Precision Rifle Marksmanship, Combat Marksmanship, Live Fire CQB/CQC, Advanced Pistol Marksmanship, Advanced Carbine Marksmanship, Aeriel Gunnery (Rifles, Shotguns, Ariel Personnel and Vehicle Interdictions, Mechanical, Ballistic and Explosive Breaching, Freefall Instructor Programs, Infiltration/ Exfiltration Techniques, Ground Mobility, Unit Pre-Deployment Training, and Research and Development of; Soldier Systems, Weapons, Ammunition, Thermal and Night Optics.

Qualifications;
Special Forces Target Interdiction Course
US Army Sniper School
NRA Rifle, Pistol and Shotgun, Instructor
NRA Range Safety Officer
Advanced Mountain Sniper Course, Instructor
Advanced Freefall, Instructor (Ratings Current)
Freefall Coach (Ratings Current)
California Personal/ Executive Body Guard Certification (Rating Current)
2005 Budweiser World Cup Super Heavyweight Jiu-Jitsu Champion
2004 Presidential Security Detail (Ariel Heavy) Cartagena, Colombia

He has trained countless U.S. Special Operations forces, thousands of International Tier 1 Operators and Special Forces around the world. He is one of the handful of operators with over a decade of combat having served in multiple theaters from Bosnia and South America to recent war efforts in Iraq and Afghanistan.

Gunfighter Moment is a weekly feature brought to you by Alias Training & Security Services. Each week Alias brings us a different Trainer and in turn they offer some words of wisdom.

Coming Soon – Shrek’s 10 Warrior Commandments

March 23rd, 2013

20130323-122702.jpg

Excellent Advice

March 23rd, 2013

Maj Gen Mattis

TEA Headsets Announces HEAR-PRO PROMO

March 23rd, 2013

TEA Headsets is offering special pricing on the INVISIO S10 combined with their Tactical U94 Push-to-Talk allowing you to replace your big bulky ear muff headsets with the INVISIO S10 Dual In-Ear Tactical Headset. The S10 provides you with certified hear-pro, enhanced electronic awareness and proven in-ear bone conduction microphone. The Tactical U94 Push-to-Talk Switch works with practically any radio (Dual Radio Version also available).

TEA Hear-Pro Promo!

INVISIO S10 Key Headset Features:
Patented Bone Conduction Microphone Technology: The INVISIO S10 is the only headset on the market that uses a true bone conduction microphone. Speech is captured from the inner ear via voice vibrations up the jawbone. Since the microphone is located in-ear auxiliary devices such as gas masks, ballistic eyewear, respirators or HAZMAT suites do not impede communications.

Certified hearing protection: The INVISIO S10 utilizes body heat activated foam tips that expand in the user’s ear creating a comfortable fit and certified hearing protection of 29dB NRR/32dB SNR.

Enhanced Combat Awareness: Unlike traditional muff type headsets the X5 provides an extremely accurate 360 degree vision of sound for the user. Users are capable of pinpointing the origin of speech and sound while maintaining constant hearing protection against damaging sounds like gunfire, explosions or vehicle/aircraft engine noise.

The Tactical U94 Push-to-Talk is one of TEA’s most popular PTT’s because of its size as well as its rugged and contoured design. The Standard or Single-Com U94 has a standard U92 or Nexus input to accommodate a wide range of tactical headsets that use this standard connector and also include an optional WPC (protective collar) to prevent hot mic. You can also customize the cable length and cable type (straight or coiled). The U94 can be configured to work with practically any 2-way radio or communication device.

Tactical U94 Push-to-Talk Key Features:
• Rugged and contoured design
• Swap the back clip for right or left side use
• Optional remote/sniper switch input
• Industrial strength components for high impact operations
• Dual radio versions available

TEA Invisio Promotion by solsys

TEA offers a no obligation 30 day evaluation program for qualified teams.

This promotion is available for purchases now through August 31st, 2013.

teaheadsets.com/index.php/contact-tea-team

Vertx Announces New Product in Kryptek Camo

March 22nd, 2013

Vertx has announced their new Kryptek Retro Skinny Tie.

Kryptek Retro Skinny Tie

Cylinder & Slide 1911 Trident II

March 22nd, 2013

The Trident II from Cylinder & Slide is an upgrade to the original Trident model introduced in 2010. The pistol is still the brainchild of SOCS Dave Hall (USN, Ret) and manufactured by Bill Laughridge at Cylinder & Slide. Each pistol is hand built one at a time by a single pistolsmith. I’m going to tell you up front that this isn’t a street gun. This pistol was designed for every day carry. Every day carry in a combat zone.

20130322-135347.jpg

The biggest difference is that the Trident II is no longer based on a Springfield GI frame. Instead, they use a Caspian frame and slide built especially for use with this model. Additionally, internal parts are CNC machined billet steel or made from forgings and heat treated throughout and every part is rigorously inspected and checked on a Rockwell testing machine to be sure that it meets Cylinder & Slide’s specifications including proper heat treatment.

20130322-135430.jpg

The Trident II is offered in 3 different platforms. The Trident II-A1 is a 5” government model with a tactical integral magazine well and an integral Picatinny equipment rail on the bottom of the dust cover. The Trident II-A2 is also a 5” government model with a tactical integral magazine well. The Trident II-A3 is a 4 3/4” Commander model without the magazine well or equipment rail and is designed for concealed carry so anything that adds size has been deleted. You can also see the external features of the pistol including the front cocking serrations and Picatinny rail in this photo.

20130322-135705.jpg

This is a good view of the Red and White safety dots that have been incorporated into this design. So many other types of pistols now feature these indicators that Dave thought it would be a good idea to add them after seeing them on the Vickers Nighthawk 1911. Dave told me he thinks LAV’s concept of bringing such modern features to a century old gun makes a lot of sense. It’s one of those extras that makes this 1911 variant a cut above. You can also see the Trident Beavertail Grip Safety with Palm Swell as well as Ambi safety since you never know which hand you might have to use.

20130322-135759.jpg

The gun as well as magazines are nickel boron coated and here you can see the integral mag well. Additionally, the Trident II incorporates an integral lanyard loop.

20130322-145007.jpg

The grip features a Machine Stippled Front Strap and Mainspring Housing in addition to G-10 Rhinohide Grips in Green or Black with slotted screws for field stripping.

20130322-135854.jpg

The cup on the Beavertail has been radically opened up. They did this so that mud or other debris would not prevent the hammer from traveling. The C&S hammer and trigger also feature a 4.5 lbs pull. The Smooth Face Trigger itself is made from Aluminum, Medium Length with Blind Overtravel Stop. Additionally there is a .45 Firing Pin Hole in the slide and the Slide Stop was designed for use while wearing gloves.

20130322-144159.jpg

Internally, the Trident II has a few differences from a stock .45 as well. You may notice the crimp in the Recoil Spring Plug. This will keep it from flying off of the spring. The barrel bushing is finger tight and they’ve also included a match barrel which, along with the frame, have been throated for reliable feeding. The Ejection Port is lowered with Bullet Nose Relief combined with a “Tuned” Extractor and Extended Ejector. Finally, the Plunger Tube is recessed in the Frame for added support.

20130322-143905.jpg

The Trident II is topped off with a carry bevel. Add to all of this a sight combination consisting of a Heinie “Ledge” Rear Sight and a C&S Strong Front Sight with Trijicon Tritium Green Dot and White Ring and you get one hell of a 1911.

Select parts used on the Trident II are available for use with your current 1911. Contact C&S for details.

www.cylinder-slide.com

Cylinder and Slide – Takes Virginia Beach

March 22nd, 2013

Each Spring 1911 specialists Cylinder and Slide comes to the Virginia Beach area to offer several training courses but these are classes unlike any others out there. This year Pistolsmith Bill Laughridge offered two days of match oversized 1911 barrel fitting, followed by a full day of 1911 maintenance including the history of the pistol. After a one-day break the course culminates with a week-long, full custom .45 build course where students get a frame and a box of parts and learn to fit each part. Bill describes the process as “putting ten pounds in a five pound sack,” due to the sensory overload experienced by day five. Bill went on to explain that the hardcore students will attend their first course and immediately start working on their next build. Invariably, they’ll run into a new challenge. Cylinder and Slide is prepared for that and all former students have to do is pick up the phone and ask for some advice. Additionally, graduates are supported from then on with dealer pricing. Many come back for a second course and say that they pick up those little extras that really make the gun during that second experience.

20130322-111244.jpg

For example, Tracey, the lady in the photo receiving instruction from Bill Laughridge is a recreational shooter who is finishing her second class. She reiterated that she has picked up quite a few new tricks on her second go around. Tracey is incorporating some different options in this latest build including an ambidextrous safety. Earlier this year, she began to shoot southpaw and has seen an increase in accuracy. Below is one of the guns Tracey built alongside a build by her husband Dave, a retired Navy SEAL friend of mine.

20130322-120635.jpg

One of things I really enjoy about this course is that Bill teaches students how to do everything with hand tools. You don’t need a machine shop to work on a .45. Instead, students learn to use dremel tools and drills in some interesting ways. Naturally, students also become intimately familiar with files. There is lots of marking and filing, marking and filing until everything fits. At the end of the week, the students take their new creations to a local range and test fire them. For some, this will mean a few more passes with the file but for all, a rewarding experience, crafting a new firearm. Jim Tolbert Sr is seen below working on his new 1911.

20130322-120449.jpg

If you are a 1911 aficionado this is a great course, regardless of where you take this training.

www.cylinder-slide.com