FirstSpear TV

Posts Tagged ‘UF PRO’

Sneak Peek – UF PRO’s Delta OL 3.0 Suit

Thursday, December 1st, 2016


Wearing comfortable clothing is essential when you want to stay focused, especially when operating outdoors in winter conditions with a full load-out, and the Delta OL 3.0 Jacket and Pant have been designed specifically with this in mind.

During activities in cold weather, the Delta OL 3.0 jacket will keep you protected against all kinds of cold weather hazards, offer you the necessary durability and most importantly, give you the comfort you need to focus on your tasking.

The Delta OL 3.0 jacket is due to its face material windproof and water-repellent. This means that the 2-layer ripstop laminate will stop wind-chill and also keep you dry during heavy snowfall and light drizzle.

A combination of G-Loft and WINDSTOPPER® means the Delta OL 3.0 uses the perfect technologies to protect you. The exceptional G-Loft thermal insulation created out of different hollow polyester fibres a 3D structure which can retain the maximum amount of dry air. This creates a warming thermal insulating layer between you and the cold environment. And the fibres keep their structure also when wet. Due to the so called “memory effect“, they always return to the original form, even after multiple washes and hard usage.


To keep your core warm and to give you extra movability in the arms area the jacket has two grades of thermal insulation. In the torso area it is lined with a 145 g/m² and in the sleeves with a 110 g/m² G-Loft insulation. Areas which are more prone to abrasion, like the elbows and the lower back area, are additionally reinforced with a 500 Denier Cordura® fabric.

The jacket offers in total 8 pockets, which allow you to stash most of the stuff you need within hands reach. Smaller gear can be stowed away in one of the 4 sleeve pockets. For bulkier gear you can use either one of the big front pockets or the two inner pockets. Due to the Delta OL 3.0 jacket’s anatomic cut, the jacket allows you freedom of movement, but at the same time it is tight enough so you can wear additional gear, like plate carriers or chest rigs over it.


The complementary Delta OL 3.0 pants are one of the very few thermal insulation pants on the market which offer a non-baggy cut, allowing you amazing movability and without compromise on thermal protection. Due to the special Flex/Zone construction and an integrated bi-elastic stretch part in the upper front and back, UF PRO can create anatomic fitted pants which follow all your moves and don’t compromise on thermal insulation protection.

The Delta OL 3.0 pants are thanks to their face fabric windproof and water-repellent. This means that the 2-layer ripstop laminate will stop wind-chill and also keep you dry during heavy snowfall and light drizzle. Just like the jacket they make use of G- Loft insulation and WINDSTOPPER® fabric to give optimal performance.

The pants are feature an adjustable waist, long YKK® water repellent side zips, belt loops and detachable suspenders; they also benefit from two fleece lined front pockets with YKK® water repellent zips, adjustable lower legs with boot hook, and Cordura® reinforcements in the knee and instep area.

If you need to be operating at the highest level in the worst winter conditions then the Delta OL 3.0 Jacket and Pant are the very tools for the job.

Find out more at ufpro.si/delta_ol_3_0.

UF PRO – Monsoon Rain Shirt

Friday, November 4th, 2016

The ultimate weather protection jacket underneath your body armour or chest rig.

Trzin, 4.11.2016 UF PRO introduced today a new addition to their Monsoon waterproof range- the new Monsoon Rain Shirt.

The lightweight, low bulk Monsoon Rain Shirt is specifically designed to be worn underneath the body armour, chest rig or other additional gear. It’s made out of a special laminate mix, which makes the jacket thin, breathable and
lightweight where it is covered with gear and very robust and extra durable wherever it is not.

Exposed areas, like shoulders, lower back and sleeves are made out of a robust and durable 3-layer laminate. The rest of the jacket is made out of an extremely lightweight and low bulk 2.5-layer laminate. Both laminates are based on a super breathable and reliably waterproof high-tech membrane. For better wear comfort and reduced risk of secondary fragments underneath the body armour, there are no pockets or zipper pullers in the torso area.

In order to avoid the formation of so called “thermal bridges“ between your skin and the outside air, the Monsoon Rain Shirt has built-in air/pac inserts in the shoulder area. These 8mm thick mesh inserts give you the necessary insulation between your skin and the outside temperature and thus prevent cold air to transfer from the outside to your skin. Due to their 3D foamy structure, the air/pac inserts also distribute the weight of plate carriers or backpacks.

For an unhindered vision and an uncompromised hearing, the jacket has a special integrated hood system called the Hood/Harness. The harness comfortably connects your head to the hood and thus flawlessly follows your head movements, allowing you unhindered vision in extreme weather conditions.

And since there is no strapping needed, the space between your head and the laminate is kept, which keeps the air circulation and doesn’t limit your hearing.

The Monsoon Rain Shirt is available in Brown Grey and in PenCott GreenZone.

Find out more about it here: ufpro.si/uf_pro_products/jackets/94/uf_pro_monsoon_rain_shirt

UF PRO – Delta Eagle Jacket

Thursday, October 6th, 2016

eagle-gen-2-jacket-opener

THE WIND BREAKER. UF PRO RELEASE THE GEN.2 DELTA EAGLE JACKET.

As the weather turns colder and wetter you really do need to get the very best performance from your clothing system, and the UF PRO® Delta Eagle Jacket is a bomber-tough, all – purpose soft shell jacket for almost all weather conditions and low temperatures.

material-construction

The UF PRO® team have revisited their original Delta Eagle and brought things fully up to date using the most advanced fabrics, material and technology currently available.

The latest iteration of the Delta Eagle jacket is the perfect choice for cooler and damp environments due to its special material construction. The jacket is made out of a high quality breathable ePTFE based softshell material, which is lined on the inside with an insulating microfleece.

The face fabric of the jacket is highly windproof and water-repellent, which means it will protect you against wind-chill and even light drizzle; in truly horrendous wet weather conditions it can even be worn as an insulator under one of their Monsoon waterproof rain jackets.

hoodharness

The Delta Eagle jacket is equipped with a new generation of the UF PRO® Hood/Harness® system. The system comfortably connects your head with the hood without bringing it directly in contact with the laminate.

This also means the hood follows all your neck movements and your vision is never compromised, and since the laminate isn’t directly in contact with your head, the air flow and your ability to hear aren’t limited.

The hood is made out of a very light weight, waterproof 3 layer micro-grid laminate which makes it a perfect emergency hood when caught outdoors in rainy weather. And when you don’t need it, the hood can easily be stowed away into the collar.

chest-pockets-access

The jacket offers 8 pockets in total so it is easy to store most of your “everyday carry” gear in it. All pockets are highly functional and easy accessible; the big chest pockets can be accessed from two sides. So if for instance you only have your right hand free, you can still easily access the left chest pocket.

The 4 arm pockets are perfect for stowing away your smaller stuff, which you may need to access quickly. They are also mesh lined, so in case it gets too hot you can open them and use them for additional mechanical venting, and the larger two inner pockets can be used to store your valuable stuff like your wallet, or bulkier gear, like gloves.

airpac-insert

Finally, for better wear comfort while carrying a backpack and in order to avoid so called “thermal bridges“ between your skin and the outside material, the Delta Eagle has integrated air/pac® inserts in the shoulder area.

If you’re updating your clothing system this year then the Delta Eagle Gen.2 softshell jacket should be high on the list of your priorities.

Find out more: ufpro.si/uf_pro_products/jackets/91/uf_pro_delta_eagle_gen_2_jacket

UF PRO – P-40 Classic Pants Now Available In Desert Grey

Friday, September 30th, 2016

desert-grey

UF PRO is now offering the P-40 pant in a new colorway, Desert Grey. For a full overview on the P-40 pant, check out UF PRO’s release on them here, but in brief, the P-40 is a tactical pant designed to provide the wearer with comfort and functionality, with an anatomic cut, stretch areas made of Schoeller dynamic fabric, and 7 pockets.

15-p_40_classic_pants_desert_grey3-78e5c13885bf85e0

ufpro.si/uf_pro_products/pants/15/uf_pro_p_40_classic_pants

UF PRO – Striker Stealth Smock

Thursday, September 1st, 2016

UF PRO Breathes New Life Into The Classic Combat Smock

Striker-Stealth-Image

As announced at this year’s IWA exhibition in Nuremberg, today UF PRO will be releasing their new and innovative Striker Stealth Smock to the international market. The UF PRO Striker Stealth Smock merges features of a combat jacket and a load bearing vest in a very unique way.

Ever since the paratroopers of WWII adopted the classic smock design it has been the trademark of elite users worldwide. However, with the increased use of chest rigs and plate carriers many have questioned whether such a design is still valid for the modern battlefield. To answer this, the Design Team at UF PRO have completely reinvented the concept with a unique twist.

Striker-Stealth-Pocket-Configuration

The concept of the Stealth Smock was born out of a project with a German military unit which was in search of a jacket that would offer a full pocket functionality for their most essential gear on a short-term mission.
UF PRO came up with a design so that the jacket could carry a wide range of gear; the Stealth Smock can be loaded with as much as 12 – 15 kg, but in order to maintain user agility with a fully loaded jacket, they had to rethink the whole concept of a smock design.

Stealth-Load-Bearing-System

A substantial part of the new Stealth Smock is the breathable load bearing system, which consists out of two modules; a waist belt which not only carries the weight but also fixes it onto the hip area, and a huge area of air/pac® inserts in the upper torso and back area which carries the remaining weight.

The special thing about the Stealth Smock pocket configuration is that it is modular. The integrated front MOLLE system allows the wearer to either attach his own or the new UF PRO pouches.

The Striker Stealth Smock can be equipped with the UF PRO Elbow pads, and benefits from the excellent Hood/Harness system which allows unhindered vision, air circulation and good hearing while wearing the hood.

Striker-Stealth-MOLLE

MultiCam and PenCott GreenZone variants are created using a combination of 50% Nylon, 50% Cotton Ripstop, and 100% CORDURA fabric in the reinforced areas, whereas Flecktarn and Brown-Grey make use of the Polyester, Cotton Ripstop blend, and 100% CORDURA fabrics, all of the very highest quality and durability.

The unique load bearing system of the Striker Stealth Smock combined with the choice of first rate fabrics and some cutting-edge design ensures that even fully loaded the jacket does not get caught up around you whenever you make a move. It ergonomically distributes the weight over the whole torso and provides truly excellent levels of comfort and performance.

Find out more about the Striker Stealth Smock at ufpro.si/striker_stealth_smock

THE NEW UF PRO STRIKER XT GEN.2 BDU

Thursday, June 23rd, 2016

Striker-XT2-action-shot1

Trzin, 23.06.2016. UF PRO introduced today the new generation of their Striker XT BDU.

As already announced at this year’s IWA exhibition in Nuremberg, UF PRO will be launching the new generation of their Striker XT Combat Shirt and Pants. Since its introduction in 2014, the first generation of the Striker XT BDU’s became one of the most popular UF PRO products and they promise that the new generation will push the standards even further.

airpac inserts transparent view

The new Striker XT Combat Shirt offers the already proven air/pac inserts in the shoulder area for weight distribution, a materials mix of polyester, cotton and merino and an anatomic and flexible elbow protection system.

Opening the upper arm pocket with the help of a strap

The Gen. 2 Shirt has a longer front zipper, and the polyester/ merino armpit area is additionally reinforced with a nylon mesh for protection against abrasion. Webbing on top of the lower sleeve pocket provides the flexibility for attaching the UF PRO Device Pouch, or any other MOLLE compatible pouch.

The Striker XT Combat Pants are known for their hybrid structure, which allows the user unhindered movement with a smart pocket configuration and comfortable knee protection.

Materials Mix Striker XT Pants

The Gen.2 Pants have now even more stretch built in and offer a bigger and more easily accessible pocket configuration.

3 Layer Knee Protection

The 3-layer knee protection can be equipped with either a shock absorbing Flex Pad or with the new UF PRO Flex- Soft Pad, which offers extra cushioning while kneeling down. Both pads can be reinforced with a penetration resistant UF PRO Solid Pad.

Elbow pads layers

The camouflage versions of the Striker XT pants now also have integrated camouflage Schoeller-dynamic stretch panels.

Find out more about the new UF PRO Striker XT Gen.2 BDU here: ufpro.si/strikerxt_gen2

UF PRO Hunter Sweater Back In Stock

Friday, June 10th, 2016

Wind and weather resistant, the Hunter Sweater incorporates the very comfortable 37.5 micro fleece which also works as stretch panels under the arms.

It incorporates a zippered upper and lower arm pocket on each side.

The Hunter Sweater packs very well.

Offered in sizes XS – 4XL, in MultiCam and PenCott GreenZone.

ufpro.si/uf_pro_products/shirts_and_sweaters/57/uf_pro_hunter_sweater/

UF PRO To Exhibit At Eurostatory

Tuesday, June 7th, 2016

Trzin, 06.06.2016. UF PRO® are going to exhibit their newest product range at this year’s Eurosatory exhibition in Paris. Visit them in hall 6, stand D287.

For the 25th time, the world’s defence industry will gather at the Eurosatory exhibition which will take place from 13th to 17th June at Parc des Expositions in Paris- Nord- Villepinte.

UF PRO® are also going to be present in Paris, where they are going to showcase besides their current products, the new Delta OL 3.0 Suit and the Delta Blizzard Suit in snow camouflage.

Of course, the new generation of the Striker XT BDU, Monsoon Jackets and the new Stealth Smocks are also going to be displayed.

So make sure to visit the UF PRO® booth in hall 6, stand D287.

If you want to book a meeting with the UF PRO® team at this year ?s Eurosatory exhibition, simply write an e-mail to ufpro@ufpro.si.

Find out more about Eurosatory here: www.eurosatory.com