SureFire

Archive for April, 2019

USA Shooting Launches RAISE THE FLAG Campaign as part of 2020 Vision

Thursday, April 25th, 2019

Chairman’s Challenge Underway to Ensure Competitive Opportunities for America’s Shooting Team

(COLORADO SPRINGS, Colorado – April 24, 2019) With exactly 15 months until the 2020 Olympic Games get underway in Tokyo, Japan, USA Shooting is launching the RAISE THE FLAG campaign. The campaign will serve as the motivational driver used to pursue all available resources and sharpen the organizational vision on the mission of getting athletes on the podium and seeing that American flag raised in competition.

The key element of the campaign is the Chairman’s Challenge being initiated by USA Shooting Board Chairman Chad Whittenburg, in what he describes as a true sense of urgency and directed passion. The USA Shooting Board of Directors recently voted to fund all athletes qualifying for World Cup events in 2019, a decision that means the organization needs to raise $200,000 to support that effort.  Previously, athletes were only allowed to compete if they had achieved a Performance Standard Score (PSS), which was the average score needed to make a World Cup Final. With the start of the Beijing World Cup Tuesday, USA Shooting is fielding complete teams across all disciplines for the first time since before 2016.

“I will not sit back any longer without doing everything I can to make sure our athletes have the resources they need to go about raising our flag at international competition,” said Whittenburg, who became Chairman in January. “It is unacceptable to me that we as an organization and shooting sports community can’t rally behind America’s Shooting Team athletes enough to ensure they can compete overseas as proud members of Team USA without having to fund that trip themselves. Our athletes deserve the opportunity to compete and get better without that financial stress weighing over them.  We can do better for our athletes that represent America and the shooting sports at the highest level and accepting this challenge will allow us to do so and help us achieve our 2020 vision.”

On average, funding an athlete to compete in a World Cup costs approximately $3,400. Thirty athletes are competing at the Beijing World Cup, for a team total of $102,000, not including coaching and team support expenses. 

The Challenge will begin with Whittenburg asking all seven current BOD members to help jump start the effort as well as all 15 USA Shooting staff members.  Every single dollar raised will go directly to paying

for athletes traveling overseas to World Cups, World Championships and World Cup Finals for the remainder of this calendar year to help us Raise the Flag. 

Accept the Chairman’s Challenge Today, DONATE NOW:  www.usashooting.org/rtfchallenge

This RAISE THE FLAG campaign will also feature a new licensing effort with a full line of quality merchandise and shooting accessories that will be available in various retail outlets starting in June. Look for exclusive merchandise before that on the USA Shooting Store. The Midway USA Foundation will also incorporate the licensed apparel in their interactions with more the 2,700 youth shooting teams.  

Storytelling and creative content will also be an important ingredient of the new campaign with USA Shooting hopeful to elicit new energy and community-wide awareness in support of America’s Shooting Team. USA Shooting Team athletes represent everything there is to love about the shooting sports. The story of our athletes can’t be told enough and as we cheer them on along their Road to Tokyo and beyond, we hope the shooting sports community will take the time to recognize what opportunity this next year provides to help change the narrative and to give the gun culture something to be proud of and stand behind.

The new campaign will also provide greater engagement opportunities and additional pathways for sponsors and donors to get involved in supporting America’s Shooting Team.

High Speed Gear Launches Sure-Grip IWB Holster and Quick Pocket Holster at NRA 2019

Thursday, April 25th, 2019

For Immediate Release – SWANSBORO, N.C. – Manufacturer of Battle Proven Tactical GearTM, High Speed Gear®, has launched the Sure-Grip® IWB Holster and the Quick Pocket Holster. The Sure-Grip® Holster is designed to provide the utmost in comfort for inside-the-waistband carry, combining the manufacturing techniques and materials HSGI® is famous for. The Quick Pocket holster offers superior grip to keep the holster pocketed even when firearm is drawn.

The Sure-Grip® IWB Holster is constructed of 1000D Cordura® nylon laminate and a neoprene backing. The neoprene backing creates a “gel-like comfort” while simultaneously providing a level of grip that will hold in even the most physical situations. The Sure-Grip® IWB Holster also comes with a removable belt clip that can be used to help secure the holster to your waistband and provide extra grip throughout daily situations.

Sure-Grip® IWB Holster

– Constructed with 1000D Cordura® nylon laminate – Neoprene backing provides grip and padding

– Injection-molded belt clip fits belts up to 1.75”

– Features double-needle edge binding on all edges – Available in three sizes

– Available in seven colors

The Quick Pocket Holster is designed to concealed carry a subcompact handgun in your pocket. The rubberized exterior grips the inside of the pocket, keeping the holster in place when drawing.

Quick Pocket Holster

– Fits most small (J frame) revolvers and subcompact semiautomatic pistols

– Rubberized fabric grips pocket interior

– Flared wing is designed to catch inside pocket to further hold holster in place when drawing – Features double-needle edge binding on all edges

– Available in black and coyote brown

“While many of High Speed Gear’s® products are used by professionals in the course of their occupations, we know that times the job doesn’t end just because you clock out. Products like the Sure- Grip® IWB Holster and Quick Pocket allow our customers to keep carrying their equipment even when they might be doing everyday activities,” explained Bill Babboni, vice president of High Speed Gear®.

Visit High Speed Gear® at the upcoming NRA show April 26-28 in Indianapolis to see the new holsters on display in Booth #805!

Rosco Manufacturing to exhibit NEW PRODUCTS & show specials at the 148th NRAAM

Thursday, April 25th, 2019

April 23rd, 2019: Rosco Manufacturing; a proud manufacturer of quality American made gun barrels is proud to announce that they will be showcasing their Bloodline barrels, Purebred barrels, new products, & show specials at the 2019 NRAAM (April 26th-28th at the Indiana Convention Center in Indianapolis, IN). Rosco will also be showcasing new products like the 12.5”, 13.7”, Purebred accessories and also selling their legendary products at their booth (#4404).

Be sure to stop by booth #4404 and see what we have going on. We will be displaying our popular Bloodline barrels/ Purebred barrels and accessories for folks to check out as well as purchase. Show specials will include a 15% off on orders totaling $150 or more that are placed at the show. Customers will also receive FREE shipping and a FREE Rosco hat (while supplies last).

Come to the NRA show, hang with the #BarrelGang, buy Rosco products, and have it delivered to your house for FREE!

To see the Rosco barrels in action click here: Rosco videos For more information on Rosco Manufacturing and their products go to www.RoscoManufacturing.com.

Magpul Introduces Sling Stud QD Bipod

Thursday, April 25th, 2019

The Magpul Bipod – Sling Stud QD is the next offering in the Magpul bipod line. Designed to mount to the ubiquitous Uncle Mike’s Sling Swivel Stud that is common to nearly every sporting rifle made, the Magpul Bipod – Sling Stud QD is the strongest, most fully featured bipod available with direct sling stud mounting. Offered with a new rapid-attach sling stud mounting system, the Sling Stud QD bipod takes the fuss of aligning and tightening that comes with traditional sling stud-mount bipods out of the equation. The stainless-steel mounting system self-locates and aligns perfectly every time, and an ergonomic thumb wheel allows for excellent grip to ensure easy tightening. Additionally, two sizes of high-durometer rubber mounting gaskets are provided to ensure optimized fit and load distribution on narrow sporter-contour or wider target-style forends. The ability to mount a sling on the forend is maintained with a low-profile sling stud on the rear of the Sling Stud QD mount, which also provides for a quick detachment when it’s needed.

Providing the same premium features available in the existing line of Magpul bipods, the Sling Stud QD bipod provides the high performance associated with higher-priced bipods at a significantly more affordable price for all shooters. Spring-tensioned, Mil-Spec hard anodized 6061-T6 and injection-molded reinforced polymer legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven locking detents, extending from 6.7” to 10.0”. An industry-exclusive 50° of total tilt are controlled by a glove-friendly, knurled, tool-less, bipod locking knob located between the extended legs, allowing easy adjustment between shots. A soft rubber bipod locking knob cap is attached to the locking knob, giving users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Sling Stud QD’s legs accept most Atlas-pattern bipod replaceable feet. The streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide when folded.

• Rapid leg deployment with efficient single-handed adjustability
• Rapid-attach, self-locating stainless-steel mounting system mounts to Uncle Mike’s Sling Studs on narrow or wide fore ends, while also providing a quick detachment capability
• High strength reinforced injected molded polymer, Steel and Mil-Spec hard anodized 6061 T-6 aluminum construction
• +/- 25 degrees of tilt (about the longitudinal axis of weapon) for a total of 50 degrees
• Uncle Mike’s-style sling stud on rear of mounting body
• Adjustable friction knob for setting tilt and ease of movement
• Individually adjustable leg lengths in 0.5” increments for a total of 7 positions
• Removable rubberized feet are compatible with B&T Industries Atlas pattern replaceable feet
• Quiet and positive leg deployment, adjustment and stowage

COMPATIBILITY

• Wide or narrow foreends or M1913/M-LOK® adapters using the Uncle Mike’s pattern QD sling studs

Colors: BLK and FDE

Price: $129.95

www.magpul.com

XTech Tactical Offers Increased Capacity for M&P Shield 9mm

Thursday, April 25th, 2019

April 24, 2019

Mesa, AZ – XTech Tactical LLC, one of the fastest growing firearms accessory manufactures, has entered the single stack market with its release of its MTX Shield +2 Extender for all 9mm Smith & Wesson M&P Shields.

XTech Tactical’s VP9 and M&P9 double stack +5 magazine extensions have become widely known for their flawless feeding, durability and tool free installation. Unlike most magazine extenders on the market, XTech Tactical uses a patent pending two piece overlapping design. The injection molded extender pairs perfectly in every way with the factory grip frame of the M&P Shield.  

The MTX Shield features:
Ergonomic finger groove for improved recoil control
Custom laser texture to ensure a positive grip and aesthetically match with the pistol
Custom extended 17-7 Stainless Steel Spring
Works both on 7 & 8rd factory magazines
Works with both 1.0 and 2.0 9mm Shields
Patent Pending
Flawless Feeding
Ease of Insertion vs. Factory Magazines
Round rear edge for minimal imprint
Made in USA

MSRP only $19.95

The MTX Shield Extender works on both factory 7rd and 8rd magazines, giving the user the option of converting to 9 or 10rds!

For dealer inquiries please email dealers@xtechtactical.com.

For more information about XTech Tactical please visit www.xtechtactical.com

 

Blaser Introduces New R8 Ultimate Bolt-Action Rifle and .22 LR Conversion Kit

Thursday, April 25th, 2019

San Antonio, Texas (April 24, 2019) – Blaser USA is pleased to introduce the new R8 Ultimate bolt-action rifle.  This latest addition to the Blaser R8 line is available in two options: R8 Ultimate and R8 Ultimate Leather.  Both feature an ergonomic synthetic thumbhole stock that ensures a comfortable, relaxed shooting position and optimal control of the rifle when firing.   The new modular stock options can be tailored to individual needs and include an adjustable comb, adjustable recoil pad and adjustable recoil absorption system.

A .22 Long Rifle (LR) conversion kit is also now available for the Blaser R8.  This long-awaited .22 caliber rimfire kit includes the barrel and newly designed magazine and bolt head.  This new offering will allow current and future R8 owners to easily change from larger calibers to the small bore .22 LR for training.

“We are excited to expand our R8 rifle product line with the addition of the Ultimate and Ultimate Leather models and new .22 LR conversion kit,” said Jason Evans, CEO of Blaser USA.  “Our customers have been asking for a .22 caliber model.  This is an ideal add-on for those who like to train intensively with their hunting rifle but want the option of reduced recoil and less expensive ammunition. The new R8 Ultimate stock options are our most ergonomically advanced to date and provide serious hunters with numerous options that can be tailored to their specific needs and personal preferences.”

R8 Ultimate

Black-brown synthetic stock with black elastomer inlays

R8 Ultimate Leather

Black-brown synthetic stock with cocoa leather inlays

Options

– Adjustable Comb:  The intuitively operated, multi-level adjustable comb ensures perfect mounting.

– Recoil Absorption System:  The easily inserted recoil pad with recoil absorption system makes for a pleasant shooting experience, even with larger calibers.  The internal absorption elements are availale in different hardnesses, depending on personal preference, and can greatly reduce muzzle rise while shooting.

– Adjustable Recoil Pad:  The adjustable length, height and pitch of the recoil pad allows for quick and easy adjustment for different shooters or, depending on weather, different clothing.

Available in July 2019.

For more information on the Blaser R8 bolt-action rifle and available calibers, visit blaser-usa.com.

Samson Manufacturing Exhibiting at the 148th NRA Annual Meetings

Thursday, April 25th, 2019

KEENE, NH – Stop by the Samson booth, #1422, at the NRA Annual Meetings & Exhibits from April 26-28 in Indianapolis, say hello to our team and check out some of new products for 2019, including our Quick Clip Wallets.

Also stop by the Night Fision booth, #2704, for a chance to enter their EDC Giveaway. This giveaway features a grand prize that includes a Smith & Wesson M&P Shield with Night Fision sights and Samson’s Pocket Comp, Compact Magwell, and Magazine Extension, plus a whole lot of exciting accessories. Enter at the booth, or online at woobox.com/wo9scz. Not attending the NRA Show, you can still enter online. For a complete set of rules, go to woobox.com/wo9scz/rules.

For more information visit www.samson-mfg.com or contact esales@samson-mfg.com.

HLC Industries Inc – Announces their latest Invista CORDURA Solution Dyed Color of Wolf Gray in 500 Denier, within their In-Stock Program

Thursday, April 25th, 2019

HLC INDUSTRIES INC announces its latest addition within their IN-STOCK Fabrics – Wolf Gray available now in 500D CORDURA® TrueLock™ fiber solution-dyed nylon (SDN) 6,6 fiber technology from INVISTA’s CORDURA.

1558E825-25D6-436B-A5BA-6BB630BAA539

HLC provides the following colors within their IN-STOCK Fabrics collection in both 500D and 1000D:
• Coyote 498
• Black
• Tan 499
• Ranger Green
• Wolf Gray (1000D will be available in August 2019)

A8D211D5-BA97-430D-806C-A2CED01527D8

For further information, please contact: Peter@HLCindustries.com