Wilcox BOSS Xe

Archive for the ‘FS Friday Focus’ Category

FirstSpear Friday Focus – FS Rash Guard

Friday, July 3rd, 2020

Today we are getting a look at FirstSpear’s American Made short and long sleeve Rash Guards.

Built from a premium poly/spandex blend the FS Rash Guard is an ultralight compression fit garment that helps to protect against abrasion and rub commonly found in a maritime environment.

Quick to dry with natural sun / UV protection. Sloth flat seams, medium high collar, and integrated low profile thumb holes keep the sleeves in places when putting on equipment and other garments.

Available and shipping now in short and long sleeve in charcoal and ranger green. Order your standard t-shirt size for a compressed fit and consider stepping up 1-2 sizes for a more relaxed fit. 100% Made in America.

www.first-spear.com/rash-guard-7232

FirstSpear Friday Focus – Performance Briefs

Friday, June 26th, 2020

Today we are getting a look at the FirstSpear USA Performance Briefs. Sold as a 2 pack in Black and Graphite, 100% American made with American materials.

Modern features including anti-roll comfort waist band, flat seam technology, and a flex grid polyester/ spandex blend for maximum comfort. Four-way stretch design with no stink quick drying properties with extra room built into the front panel for enhanced support.

Available only on the FirstSpear webstore. Now Shipping.

www.first-spear.com/performance-briefs

FirstSpear Friday Focus – Centurion Short

Friday, June 19th, 2020

Today we are getting a look at the all American Made FirstSpear Centurion Short. Utilizing the same sizing, form, fit and technical features as the FS Centurion Pant but with an 11.5” inseam. Constructed with a premium ripstop nylon / combed cotton featuring Nano-glide mesh pockets that offer the perfect amount of stretch. Integrated low-profile belt system helps keep the shorts secure with or without a belt using a BioThane webbing and jam lock buckle. Removable Poron foam inserts on your right and left side allow you to carry a knife, gun, or phone in total comfort. Like most FirstSpear products the shorts are 100% Made in America with 100% USA Materials. Inseam 11.5″

Available now in sizes Small – 2XL.

Sizing Guide
• Small – 29-30
• Medium – 32-34
• Large – 34-36
• XL – 36-38
• 2XL – 40-42

www.first-spear.com/centurion-shorts

FirstSpear Friday Focus – Pub Shorts

Friday, June 12th, 2020

Summer is almost officially here and the FirstSpear Pub Shorts should be at the top of your list. Not only are they 100% American made the all new material is so light and breathable if feels like you are wearing nothing at all! The inseam is cut at 8.5”and features an integrated elastic waist band for all day comfort, redesigned pockets, and reinforced belt loops. Available in charcoal and tan in sizes 28 – 44.

www.first-spear.com/pub-shorts

FirstSpear Friday Focus – Scrap FR Shirt

Friday, June 5th, 2020

Today we are getting the first look at another all new technical garment from FirstSpear, meet the Scrap FR Shirt. Built from an advanced 3.2 oz aramid blend the scrap is an extremely lightweight shirt designed to offer some FR protection in a very low profile / low bulk solution. Wear it all on its own in extreme hot environments or use it as an outer layer to gain some flash and flame protection. Soft, pliable, and full of options that enhance comfort as well as heat mitigation.

Features a zipper front opening, reinforced with webbing sewn buttons. Protective collar can be fastened up around your FS Kojin Balaclava, FS Neckie or left open. Multi-positional cuff and security strap. To make the most of hot weather versatility the Scrap has breathable mesh in the bottom and back of the front pockets, armpits, and across the entire back yoke. All pockets feature mesh for drainage, standard FS IFF Oval Fields, and basic organization features. Cut for shooting, moving, and duration activities, a slightly longer tail to aid in protective over-lap and concealed carry when required with a slight rise in the front to access your belt line when untucked. Your FS Field Shirt Size should correspond to the Scrap and work together for you when desired. The Scrap is Machine Wash safe with minimal shrinkage. 100% American made with USA materials.

Available now in FS Graphite, FS Sand and FS Commando.

www.first-spear.com/scrap-fr-shirt

FirstSpear Friday Focus – OEM Partner Series – LionHeart Alliance

Friday, May 29th, 2020

Today we have another edition of the FirstSpear OEM Partner Series where we take a look at an all new product or company FirstSpear manufactures equipment for. This series highlights LionHeart Alliance and the Hot Pursuit Series of vests featuring FirstSpear Rapid-Release Tubes and Laser Fused 6/12 platform.

Why/How did LionHeart begin?

LionHeart began with a need for a company to focus on the needs of the Law Enforcement community. There are many companies that sell equipment to the government and some do it really well. However, those companies all chase the larger DOD business and do not give the LE community the customer service or time that they deserve. With our focus being on Federal, State, and Local LE Communities we have a greater understanding and knowledge base on what equipment works, and how best to procure this equipment that many of the other companies lack.

Why was the Hot Pursuit Vest created?

The Hot Pursuit series of vests was created to fill a void we saw in products tailored towards the Law Enforcement market. There are many features that make the Hot Pursuit series stand out, but the main feature that everyone sees from the start is the ability to accept both MOLLE compatible pockets as well as QASM placards. While there are other carriers on the market that accept just MOLLE pockets as well as those that accept just QASM placards there was no off the shelf carrier that could accommodate both. This feature is huge for issuing departments as it allows the end users to run their loadout the way they want to vice having to run it a certain way based on the carrier that was issued. Likewise, we have added ample Velcro loop on the front and rear of the carrier to accommodate identifier patches so that the end users are clearly marked during highly dynamic environments. One of the best but often overlooked feature is the rear pull up panel that exposes the ends of the cummerbund and allows the user to make micro adjustments to the fit of the cummerbund quickly and easily. During those early morning raids in which jackets must be worn, the user can doff the garment and adjust the cummerbund fit tighter and get back to the fight much sooner than with other carriers, all the while not giving up MOLLE real estate. The Hot Pursuit series in SAPI Cut, MBAV Cut, or Crime Suppression Cut are perfect options for issuing to Agencies, Departments, or Teams.

Why did you choose to use Tubes and 6/12?

These products have been industry leaders for years now. While other companies have tried to come up with comparable options, you just can’t beat the originals.

Why did you ultimately choose FirstSpear OEM manufacturing?

Was there any other option? We have had a long-standing relationship with the team at FirstSpear for many years and the visions at both companies are co-aligned in that at the end of the day all the matters is the end users and making sure they have the Gear To Give Them The Edge. With a shared vision and FirstSpear’s industry leading technology and manufacturing capabilities it was a no brainer that we wanted to develop the Hot Pursuit series with them.

Why was Made in the USA important to the brand?

Made in the USA was very important to us. While many companies are going overseas to keep the prices down on their products we decided that it was more important for us to keep it made in the USA to ensure that quality was were where we needed it to be for our customers on the streets. Will we lose out on some business due to price? Yes. But those who understand the Hot Pursuit series will see past the price and be happy with their purchase for years to come.

Any new products on the horizon between LionHeart and FirstSpear?

I know we at LionHeart and FirstSpear are always listening to our customers and adapt products to continue to fill voids in their operational equipment needs. So, all we can say is the gears are always turning, so stay tuned.

lhagear.com/dynamic-assault-systems-hot-pursuit-plate-carrier-mbav-cut

FirstSpear Friday Focus – Vision Augmentation System Soft Harness

Friday, May 22nd, 2020

Today we are getting a closer look at an impressive night vision system capability from FirstSpear. Based off the popular FS Helmet Cover the Vision Augmentation System Soft Harness was designed to function as an extremely low profile and discreet method of wearing night vision goggle systems without the use of a traditional ballistic helmet or bump lid.

Fully Adjustable 4 point adjustment matched with the Boa® Fit System, the end user can find a perfect fit based off the equipment weight and profile they are using. Loop fields can be used to attach counter balance or batteries as well as strobes or FS Cell Tags. Available in Black, Coyote, and Multicam. 100% Made in the USA. Shroud included.

Features:
• Attaches to single or multi-tube systems
• Fully adjustable soft harness with shroud
• Comfortable fit
• Adjustable chin strap with positive lock hardware
• Boa® Fit System
• Easy cable management
• Attachment fields for IFF and the FirstSpear Battery Pack

www.first-spear.com/vas-vision-augmentation-system-soft-harness

FirstSpear Friday Focus – Asset Technical Field Shirt

Friday, May 15th, 2020

Today we are getting the first look at FirstSpear’s all new color way on the Asset Technial Field Shirt. Originally available in Black and Sand, FS has rolled out an all new Commando green now in-stock. Aside from the new color the Asset has garnered serious attention within US Special Operations thanks to a long list of performance features, materials, and overall comfort.

The torso is constructed from FirstSpear’s proprietary ACM 100 Merino wool and is not only extremely light and comfortable but also does an exceptional job at wicking moisture and offers the naturally inherent antimicrobial and flame resistance of wool.

The sleeves and shoulder yoke are built with a highly breathable Para-Arimid that is double reinforced at the elbows offering impressive heat and flame resistance. FirstSpear used an anti-friction NanoGlide mesh in the arm pits to help keep you cool in the hottest environments.

Adjustable cuffs and generous sleeves can easily be rolled up. The torso is longer than usual to help keep it tucked in during long days and exaggerated movement. Bicep pockets and loop fields for IFF attachment come standard. The high collar helps to save your neck from sling rub. Like most FirstSpear products the Asset is 100% Berry compliant, made in the USA with USA Materials. In-stock and now shipping in Commando, Sand, Black/ Graphite.

www.first-spear.com/the-asset-technical-field-shirt