Blue Force Gear is constantly developing new products. This is a pouch for the 200 rd SAW Drum. It’s a simple, straight forward design but their material selections always takes their gear to the next level in both appearance and performance.
As you can see, the ULTRAcomp material extends over the top of the lid to makes SR buckle loop.
The rear incorporates BFG’s Helium Whisper attachment system.
The lightest chest-rig in the DIRECT ACTION® line, the TIGER MOTH® combines extensive customization possibilities with a compact size – for when low-profile / low-bulk is required.
Photo – Tiger Moth Chest Rig – Adaptive Green
Specs:
• Proprietary laser-cut laminate, Cordura® 500D and softshell construction
• Integrated, adjustable magazine pouches, will fit: 8 x AR type, 4 x AK type or 4 x SR type magazines
• PALS platforms on the sides for radio, medical or utility pockets
• Horizontal PALS slots under ammunition pouches for tourniquets, pistol magazine pouches etc.
• Body armor interface via buckles and additionally stabilized with Velcro
• Low profile, adjustable harness with slots for PTT and additional accessories attachment
• Flat inner pocket in chest panel
• Comms / antenna routing slots
• Available in Adaptive Green, Black, Coyote Brown, MultiCam® and PenCott-GreenZone®
The TIGER MOTH® Chest-Rig is in stock and available for online purchase in North America at us.directactiongear.com, in Europe at eu.directactiongear.com.
The de Havilland DH.82 Tiger Moth was a light biplane operated by the Royal Air Force (RAF) as a primary trainer during WWII. Tiger Moths were also used by Air Observation Post (AOP) units such the Polish-manned No. 663 Squadron RAF (663 Polski Szwadron Powietrznych Punktów Obserwacyjnych) that served in Italy from 1944-45. Air Observation Post units working closely with Army units for artillery spotting and liaison.
Photo – De Havilland 82A Tiger Moth II in Polish Aviation Museum.
Photo – 663 Squadron insignia.
Photos source: www.military.wikia.com
This mild mannered Garment Bag is designed to carry a carbine (up to 28″ oa length) nestled inside its weapons compartment.
Naturally, it also works as an actual garment bag.
1 | Accommodates rifles up to 28” overall length
2 | Padded front panel to prevent printing of weapon
3 | Laser cut MOLLE compatible VELCRO®-lined quick deployment platform
4 | EDC pull for rapid access to weapon
5 | Front Inverted pleat pocket with two mesh admin pockets in the interior
6 | Coated braided stainless steel cable for securing bag to fixed position and prevent smash and grab theft (lock not included)
7 | Shoulder pad with gripper to secure bag in place and prevent sliding
8 | Full grain leather wrapped aluminum carry handle
9 | VELCRO®-lined back pocket for use with Tactigami accessories
10 | Pass through back panel for securing to luggage trolley handle
11 | Compression straps with aluminum g-hooks on both sides
12 | Fully functional garment bag on the interior
13 | Detachable chain and hook hanging accessory
14 | Tri glide zipper opening, YKK™ Zippers throughout
15 | Dual mesh front facing storage pockets for footwear, toiletrees, etc.
16 | Dual VECRO®-lined panels for use with Tactigami accessories
17 | Center interior strap to synch and secure hanging clothing
18 | Dual butt stock pouches for vertical rifle storage when hanging
19 | Insert compatible for optional added protection
20 | Ambidextrous design for left or right handed draw
21 | Fabric construction: 1680 Denier Ballistic Nylon
Available by end of July from, www.vertx.com.
The Patrol Carrier (part number 12483-YP) is a fully RF welded, gear swallowing 90liter Drybags, designed to carry a full loaded patrol pack.
It has a 46″ YKK dry suit zipper to facilitate gear access, external inflation tube, compression straps and a low profile shoulder strap system. It is a component of the SEAL and SWCC 5-bag kits produced by Watershed Drybags.
The Responder is a lightweight plate carrier built to accept SAPI/ESAPI or 10″x12″ Shooter cut plates. Designed for those first at the scene, the Responder can be rapidly donned or doffed in active shooter situations with the use of quick release buckles. This gives a one-size-fits-all option to individuals at the scene.
This is a product that Propper has in stock and ready to ship. Level IV plates are included, front and back. Includes two ID Placards with your choice of lettering. MRSP is $759.99 for black, coyote, and olive; $839.99 for MultiCam.
www.propper.com/armor/tactical-armor/propperr-responder
The Micro Fight Chest Rig was designed by Spiritus to fill a specific need for responsible firearm carrying citizens and those who work in low-visibility operations, and is designed to give users the ability to rapidly plus-up their carried equipment from your belt kit to a light fighting load in just a few seconds. Plus, its small size makes it ideal for stashing under a seat or carrying concealed in a pack.
The kangaroo pouch is Velcro lined, securing either Spiritus’ elastic Rifle Magazine Inserts or giving the user the opportunity to utilize their favorite Kydex insert. The front pouch is Velcro lines, allowing for organization of a complete IFAK, tools, spare pistol mags; virtually any configuration the mission requires.
The Micro Fight can easily be adapted to fit on plate carriers using 1 Inch Side Release Buckles. This gives users the option to maintain the same muscle memory and training value with or without ballistic protection.
The back of the Micro Fight includes a Velcro panel, aiding in retention for Velcro-fronted plate carriers. This feature is also perfect for the S.A.C.K. pouch, expanding the carrying capabilities of this low-profile configuration.
Included in the package:
1 x Chassis
1 x Skinny Straps OR 1 x Fat Strap
1 x Back Strap
1 x Magazine Insert – 5.56 x .45 OR 7.62 x .51
Made in the USA.
www.spiritussystems.com/equipment/micro-fight-chest-rig-system-mk-2
The Teeter Pouch is a lightweight, collapsible bottle pouch that attaches directly to any PALS grid with 4+ rows and 2+ columns. Made from proprietary FirstSpear 6/12 fabric, the Teeter Pouch is adjustable for both height and depth, allowing it to do everything from secure a bottle to function as a beavertail, all while remaining lighter than comparable pouches.
Specifications
• Weight: 1.47 ounces (41.6 grams)
• Materials: FirstSpear® 6/12™ fabric (500D face)
• Features: lightweight, collapsible EDC pouch for attachment to PALS grids
• Color: coyote brown, Multicam, foliage green, black
• Made in the US from US materials
ovinnovations.com/products/teeter-pouch
I’ll file this under “interesting”. I’m just unsure of how often this is an issue. Spiritus Aystems says they created the flag bungee to be a simple yet effective tool for carrying Old Glory with you on all your operations. Currently, people are using retention bands or some other improvised means of securing their flags to their armor. This works, but is prone to failure and is unreliable. They reason that Something as important as our country’s flag deserves a much more secure means of attachment.
Their answer to this dilemma is the Flag Bungee. This kit includes three sewn double loops, a Cord Lock, and a length of adjustable shock cord.
Installation is simple: weave the shock cord through your MOLLE and the provided webbing loops, insert your flag, and tighten it down using the provided cord lock, stowing any additional length under the flag.
