XC3 Weaponlight

Archive for the ‘Press Release’ Category

HSI Awarded $1 million DND IDEaS Contract to Develop the Citadel Respirator Prototype

Monday, September 14th, 2020

Guelph, Ontario, Canada, September 2020 – HumanSystems® Incorporated has been awarded $1,000,000 through the Department of National Defence’s (DND) Innovation For Defence Excellence and Security (IDEaS) program to continue its development of the CitadelTM (Pat. Pending) respirator designed to better protect soldiers in hazardous chemical, biological, radiological or nuclear (CBRN) environments.

This project follows a previous IDEaS contract to HumanSystems® Incorporated in 2019 to develop a proof of concept design. Working with the DND’s science and technology organization, Defence Research and Development Canada (DRDC), the goal of this twelve-month project is to further develop the CitadelTM respirator design to the point where it can be tested in realistic operational environments.

“Recent changes to Canadian Armed Forces policies allow for short beards and longer hairstyles. This funding will bring the novel CitadelTM respirator concept closer to commercialization and to providing a more protective CBRN Respirator/Mask for individuals with various face/head shapes, hairstyles, and/or facial hair,” says Harry Angel, the HSI® CitadelTM project technical lead.

The proof of concept CitadelTM respirator was designed to mitigate any leakage of contaminants into the respirator mask caused by various face shapes and/or beards or facial stubble. In preliminary user testing, individuals with beards or facial stubble could not achieve an acceptable fit factor with the standard protective mask, meaning that they were susceptible to contaminants entering the mask. The CitadelTM respirator design was able to achieve an acceptable fit factor well above the minimum acceptable standard. These promising results showed that people with beards and facial stubble would be significantly less vulnerable to contaminants entering the respirator mask.

The HSI® technical team, Harry Angel and Jordan Bray-Miners, bring over 30 years of experience in human factors for personal protective equipment, biomechanics and instrumentation design.

“The HSI® team is proud to work with DRDC and to advance the HSI® CitadelTM respirator concept to better protect people in the armed forces and wherever such protection might be needed,” says Jordan Bray-Miners, Senior Consultant at HSI .

www.humansys.com

For more than 35 years, with clients in Canada, the U.S. and other countries, HSI® has been a leader in human factors and human system integration support. We work in sectors including defence, emergency responders, health care, occupational safety and utilities. Individually and for teams, HSI® helps integrate people, performance and technology so systems work effectively, efficiently and safely. HSI® services include research, design, validation and training management. We focus on user fit between the abilities of the people and the technologies that together make up any system. In this way, HSI® supports product and system developers as well as procurement decision makers to reduce risks, lower life cycle costs and benefit return on investment.

IDEaS supports the development of solutions from their conceptual stage, through prototype testing and capability development. The program includes several elements that promote collaboration between innovators, provides developmental resources and provides opportunities to interact with DND’s science and military members. Through which all innovators are on an even playing field to solve specific defence and security challenges. For more about the program, see here: www.canada.ca/en/department-national-defence/programs/defence-ideas

Travel to Cuba and Vietnam with Chef Jennifer’s Culinary Creations

Monday, September 14th, 2020

[Kittery, ME] Sept 10, 2020—Created to elevate expectations of what prepared meals can taste like, Good To-Go is launching two new dishes, just in time for the crisp days of Fall (and WFH lunches)—Chicken Pho and a Cuban Rice Bowl. These delicious Cuban and Vietnamese staples offer a culinary experience unlike any other packaged meal. Using healthy, recognizable and pronounceable ingredients, the Chicken Pho and Cuban Rice Bowl deliver the fuel needed to get through whatever adventure or task lies ahead. Both meals will be available through Good To-Go’s website and retailers in single and double servings starting September 9, 2020.

These two new recipes, connecting diners to different corners of the world, came from multiple points of inspiration:

“On a month-long trip to Vietnam in 1998, my partner/chef Anita Lo and I fell in love with the country’s Pho,” said Chef Jennifer Scism. “We would go from town to town searching out the best. My favorite memory was that Pho was often served for breakfast…noodles for breakfast? Yes please!”

CHICKEN PHO

VIETNAMESE CHICKEN NOODLE SOUP 

This popular street food is known the world over for its comforting effects. The steaming, savory and immensely aromatic broth is the foundation of this restorative dish. Notes of cinnamon and star anise, followed by fresh ginger and clove keep it authentic. Braised chicken thighs, cabbage, scallion and cilantro provide the additional sustenance needed for any adventure.

“While living in NYC, I became obsessed with a little Cuban restaurant on 8th street near NYU,” said Scism. “It was the first time I had had a Cubano sandwich. From that point on, I began my search for the best Cuban food. Little dives in Florida gave me more insight into the culture and the food, but who would think my adopted hometown of Kittery, Maine would have one of the best Cuban takeout joints? La Casita, the little orange and blue shack on the traffic circle, puts out some of the best Caribbean food I’ve ever had, and my Cuban Rice Bowl is homage to their delicious rice and bean dishes.“

CUBAN RICE BOWL

BLACK BEANS, PLANTAIN AND RICE WITH GARLIC CREMA SAUCE

Big, bold flavors with a balanced spice take this rice bowl to new heights. The combination of rice and beans creates a complete protein—providing you with all the amino acids you need to go that extra mile. While this meal is vegetarian, even the hungriest of carnivores will appreciate the 15g of protein per serving. Garlic crema sauce and plantains create unique flavors you’ll find in no other camp meal.

In 2020, Good To-Go is also launching updated packaging across the line, with these two new additions offering the first peek at the new format. Larger callouts help adventurers choose the right meal(s) based on calories, protein and other dietary preferences while the vibrant colors and icons reminiscent of Maine and the outdoors remain.

Good To-Go was founded by Jennifer Scism, an award-winning chef and long-time co-owner of Annisa, a nationally recognized restaurant in New York’s Greenwich Village, and David Koorits, an outdoor enthusiast who has spent his career as a wilderness therapy counselor, ski patroller, wildland firefighter and nurse. Scism’s career has long been focused on the importance of good food. She has cooked at NY Times 4-Star rated restaurants, traveled to over 20 countries studying regional foods, and along with her team from Annisa, beat Mario Batali on the TV Food Network’s Iron Chef program. Started in 2014, a time when the market was craving something tastier and healthier, Good To-Go has won multiple outdoor industry awards and start-up competitions, while they continue to add people-power and production space to address demand. Today, the brand’s dehydrated gourmet meals are sold in over 700 stores nationwide and in Canada. More info can be found at www.goodto-go.com.

Thyrm Introduces the CellVault-18

Monday, September 14th, 2020

Sunnyvale, CA — Not long ago, the best tactical lights were fueled by CR123 batteries. We were all generally happy with 600 lumens and an extra budget line item for disposable cells. But in the last couple years that has changed completely. Enter the latest 18650 and 18350 rechargeable batteries, generating huge lumen and candela numbers in SureFire, Modlite, & Streamlight flashlights. To keep up with these lights, Thyrm has developed a next-generation CellVault that can protect 18-series spare batteries while keeping them immediately accessible.

From Andrew Frazier, CEO of Thyrm: “The new CellVault-18 includes features we know our customers are going to love, like side windows that help them verify gear status, a metal locking latch, and fully waterproof double-layer construction. We’re really proud of how the design came together and can’t wait to get them in the hands of first-responders and outdoor enthusiasts alike.”

Features:
• Holds One 18650 or Two 18350 Rechargeable Batteries
• Waterproof O-ring seal rated to IPX8 at 2 meters for 30+ minutes
• Folding metal latch for simple installation and positive attachment
• Silicone foam shock absorber/noise silencer
• Clear side windows allow for gear status checks
• Slim profile: less than 1 MOLLE/PALS column wide for easy integration into existing gear configurations.
• Designed and manufactured in the USA

thyrm.com/product/cellvault-18-battery-storage

DoD Funds Development of DroneShield’s C2 System

Sunday, September 13th, 2020

DroneShield Ltd (ASX:DRO) (“DroneShield” or the “Company”) is pleased to announce it has received funding from the United States Department of Defense (“DoD”) for targeted development of its DroneShieldCompleteTM Command-and-Control (“C2”) system.

The section of the DoD, which has awarded the contract, is a new customer for DroneShied. The funding was awarded through a sole source contract.

DroneShieldCompleteTM is an intuitive and feature rich C2, providing real time alerting, tracking and reporting information for native DroneShield as well as third party sensors. The DoD is working with DroneShield, providing funding for an agreed list of feature enhancements, for a project expected to span over several months. Importantly, following that period, the DoD is expected to make multiple purchases of DroneShield’s C-UAS equipment, which would run on the enhanced DroneShieldCompleteTM C2.

Oleg Vornik, DroneShield’s CEO, has commented, “We are proud to be working with the United States Department of Defense, one of most demanding defence customers globally, on this project to ensure our DroneShieldCompleteTM C2 stays at the cutting edge of customer requirements. Further, this project underscores our leadership not only as a product/sensor manufacturer, but also as an integrator of fixed site and mobile C-UAS systems. This contract is a material milestone in cementing our close working relationship with the largest defence customer globally. In addition to expected purchases associated with this paid development contract, further orders for other DroneShield solutions are expected as part of developing a trusted supplier relationship with this customer.”

Whilst the Company is unable to precisely quantify the follow up orders, it expects the orders to be material and will in due course provide an update on the dollar amounts to the market, when available.

Black Collar Arms Forged Carbon Fiber Components

Thursday, September 10th, 2020

Austin, TX (09/07/2020) — Originally developed as a joint effort between Lamborghini and Callaway Golf Company, the forged carbon fiber process can produce complex shapes one-third the weight of titanium, yet stronger. Partnering with manufacturing company McVick, Black Collar Arms is excited to bring the world of forged carbon fiber components to a firearm near you.

Available first are Forged Carbon Fiber One-Piece Scope Mounts in 30mm and 34mm ring sizes. Despite weighing in at a scant 5.2 ounces, these forged carbon fiber scope mounts are as stiff and rigid as if they were machined from steel (three times stiffer than aluminum!) with just 1/6th the thermal expansion of aluminum.

These are the most rigid scope mounts on the market and maintain flawless zero in any condition. As if the gorgeous carbon fiber aesthetic wasn’t enough!

Forged Carbon Fiber One-Piece Scope Mounts are the first in an upcoming line of forged carbon fiber components currently being designed by Black Collar to be manufactured by McVick exclusively for Black Collar. Expect further optic mounting solutions plus other accessories and components, including AR-15 parts.

Quality is extremely high, but current production capacity is low. Mount availability will be rather limited with small batches arriving at Black Collar weekly while we gradually invest in increasing capacity.

Despite the limited and exclusive nature of the Forged Carbon Fiber One-Piece Scope Mounts and their physical advantages over aluminum mounts, not to mention their drop-dead gorgeous looks, MSRP is in-line with other premium scope mounts.

More information can be found at: blackcollararms.com/product/forged-carbon-fiber-one-piece-scope-mounts

Introducing the Newest Reebok Work Sublite Cushion Footwear: EXOFUSE

Thursday, September 10th, 2020

St. Louis, MO (September 9, 2020) – Warson Brands, official licensee of Reebok for occupational footwear, introduces the Exofuse extension of the wildly-popular and industry-leading Reebok Sublite Cushion Work line of work shoes. The series includes two styles of athletic work shoes.

The Reebok Sublite Cushion Work incorporates a Sublite foam midsole to maximize cushioning while minimizing weight.  A proprietary blend of lightweight foams create the Sublite midsole, which achieves maximum lightness with a soft underfoot feel.  Deep flex grooves in the midsole allow for natural movement of the foot and greater range of motion.  At the heel and toe are rubber pads for stopping power and takeoff propulsion.

“The Reebok Sublite Cushion Work is our lightest series of work footwear”, says John Duvic, VP of Product Development at Warson Brands.  “Industrial workers are on their feet all day carrying heavy loads for their job, so we wanted to create one piece of equipment that wouldn’t weight them down.  The Sublite Cushion Work is it. With these latest two models, we added an Exofuse water resistant microfiber upper and extra slip-resistant traction at the heel and forefoot.  This is a great shoe for anyone around chemicals, water, grease, and oil.”

The Sublite Cushion Work also features a MemoryTech Massage 2.0 footbed that adapts to the unique contours of the foot.  A lightweight XTR® Brand alloy toe cap provides plenty of room in the toebox while meeting or exceeding ASTM F2413 safety standards.  The RB4050 and RB4051 both provide electrical hazard protection and are metal free.

Reebok work footwear and the Sublite Cushion Work series are available through select retailers throughout the United States and at www.reebokwork.com

For more information on the new Sublite Cushion Work with Exofuse Water Resistance, please visit warson.widencollective.com/portals/iu0kx7d4/RBSubliteCushionWork.

THRiL Now Available Through MSR Distribution

Thursday, September 10th, 2020

The company, established in 2017, began manufacturing specially designed mags, grips, and stocks with the intent to continually support the passion of tactical, hunting, and outdoor recreation enthusiasts. Their vision is to give back to the individuals that have served to protect our rights and support communities to ensure longevity of these activities.

MSR Distribution has built their reputation on being the go-to specialist wholesale distributor for hard-to-find and highly sought-after products. Their partnership with THRiL enables MSR Distribution to provide those seeking quality firearm accessories with the latest and greatest products that THRiL has to offer.

All THRiL products are proudly developed, tested, and manufactured in the USA, with a portion of all product sales being donated to a charity or foundation supporting those that give so much back to this country and its communities.

“We’re excited to expand our distribution channels and are thankful that MSR distribution is helping us to continue our mission to support the passion of firearm enthusiasts across the country,” says Kas McManus, Vice President at THRiL. He continues, “Our PMX AR Mag is now available for purchase on MSR Distribution’s site and we look forward to our continued partnership.”

thrilusa.com

Galvion Appoints SMA (Retired) Dan Dailey as a Strategic Consultant

Thursday, September 10th, 2020

Galvion, a world leader in innovative head protection systems and power management solutions, has announced the recent appointment of Sergeant Major of the Army (SMA) Daniel A. Dailey, U.S. Army retired, as a strategic consultant to the Galvion team.

SMA (retired) Dan Dailey, is a native of Palmerton, Pennsylvania. Dailey enlisted in the Army in 1989 as an 11B (infantryman). During his 30-year career, Dailey held every enlisted leadership position in the infantry. Dailey was sworn in as the 15th Sergeant Major of the Army on Jan. 30, 2015 and relinquished the position on Aug. 9, 2019.

In addition to four tours in support of Operations Iraqi Freedom and New Dawn, Dailey deployed in support of Operations Desert Storm and Desert Shield. He earned the Bronze Star with Valor for his leadership during the 4th Infantry Division’s two?month Battle for Sadr City in 2008.  

Dailey is a graduate of class 54 of the U.S. Army Sergeants Major Academy and the Command Sergeants Major Course. Dailey holds a Bachelor of Science (Summa Cum Laude) from Excelsior College.

SMA (retired) Dan Dailey said: “Galvion’s focus on active, performance-enhancing equipment –making the soldier faster, lighter and more connected – is the future of survivability.  The team understands the soldier and is thinking not just about what they need today, but more importantly, what they will need tomorrow”.  

“SMA (retired) Dailey’s pedigree speaks for itself,” said Jonathan Blanshay, CEO of Galvion. “We are incredibly fortunate to have him working with our Senior Leadership team, providing invaluable insight and expertise garnered from a distinguished career in the U.S. Military.  Since joining us, we have learned first-hand that his career-long commitment to the survivability of the soldier, not to mention his overall core values, so closely align with what we work towards every day at Galvion.  We are truly honored to have Dan on our team.”

www.galvion.com