Weapon Accessories | Soldier Systems Daily Soldier Systems Daily

Archive for the ‘Weapon Accessories’ Category

TNVC Celebrates the 10th Anniversary of Their Riser Stock Pouch (RSP)

Thursday, May 17th, 2018

Vic Di Cosola sent me a brief history behind the RSP.

Approximately 10 years ago when I started to see more and more pics of our Brothers and Sisters getting re-issued scoped M14’s into Afghanistan (initially without those fancy Sage stocks) were basically using pillows and duct tape to get their cheek welds up, I knew there had to be a better way. The RSP was born!

As we celebrate the RSP’s 10th anniversary, demand of the RSP is still strong for the M1A lovers out there who need to get their head aligned a bit better with their optics. THANK YOU from all of us here at TNVC who have made the RSP the best solution for this weapon platform.

tnvc.com

Tags: TNVC Inc
Posted in Advertiser, Press Release, Weapon Accessories | Comments Off on TNVC Celebrates the 10th Anniversary of Their Riser Stock Pouch (RSP)

NeoMag

Tuesday, May 15th, 2018

The NeoMag is the original magnetic magazine holder that inconspicuously holds a magazine inside your pocket. The NeoMag is made using the best materials and finishes available. Blacknitride steel construction ensures no corrosion and that it is nearly indestructible. The hand bent Titanium pocket clip is light weight and extremely strong. The strong clip pushes down on a rubber pad that will make sure the NeoMag stays put in your pocket when you draw your magazine. The very strong neodymium rare-earth magnet will retain nearly all magazines including OEM Glock magazines. Proudly made in the USA and backed by a lifetime warranty.

Sizing is simple:

Large fits all .45 ACP and 10mm magazines.Both single stack and double stack.
Medium fits all 9mm and .40 S&W magazines. Both single stack and double stack.
Small fits all .380 ACP magazines. Both single stack and double stack.

theneomag.com

Tags: NeoMag
Posted in Weapon Accessories | 4 Comments »

Vickers Tactical Slide Racker for the Gen5 Glock Models

Sunday, May 13th, 2018

TangoDown™ Inc. is pleased to announce the latest addition to the Vickers Tactical™ lineup!

Introducing the GSR-04 Slide Racker for all current Gen5 pistols! The GSR-04 offers serrated wings which allow for easier slide retraction in non-ideal situations: wearing gloves or sudden “tap/rack” manipulation. Made from tough, stainless steel & injection molded glass reinforced nylon. Installs in minutes, without any weapon modifications

Fits Gen5 Glock™ 17/19/19X/26/34
Fits most Gen5 Glock™ models with 1.00 slide width
Color Availability: Black
OA Length: 1.187
Width: .620
Weight: 1oz
TangoDown™ Part Number: GSR-04
MSRP: $18.95
Made in the USA

For more information, visit: tangodown.com/shop/vickers-tactical-slide-racker-gen5-glock-gsr-04/

Customer Questions: sales@tangodown.com/a>

Tags: TangoDown
Posted in Advertiser, Press Release, Weapon Accessories | 2 Comments »

ZEV Technologies – PRO Plus Magwell

Friday, May 11th, 2018

The ZEV Technologies PRO Plus Magwell was designed for the professional shooter that is looking to enhance the look and performance of their Gen5 Glock. The one piece design facilitates easy installation and utilizes a single attachment screw to securely mount to the Glock frame while retaining a low profile.

The ZEV PRO Plus Magwell was designed and tested for compatibility with standard capacity factory magazines as well as magazines fitted with ZEV basepad magazine extensions. It also incorporates a pass-through hole at the back for lanyard retention.

One piece 6061 aluminum design with Type III anodized finish. Kit includes magwell body, mounting screw, and wrench.

www.zevtechnologies.com

NOTE: Back straps may need to be modified if used.

Tags: Zev Technologies
Posted in Advertiser, Press Release, Weapon Accessories | 2 Comments »

B&T USW-320

Thursday, May 10th, 2018

Released earlier this year, the USW-320 is based on B&T’s Universal Service Weapon, except that it’s a drop in lower receiver for the SIG P320 Fire Control Unit and Slide rather than a full firearm. Like the USW, it incorporates a right-side, fixed-length, side-folding stock.

As more and more organizations adopt the P320, this offers a more stable platform for those longer shots.

The USW 320 is pretty bare bones. You must also install a P320 magazine release. Additionally, a red dot optic can be mounted, but it has to be on the P320 slide you’ve provided. Hopefully, this spartan approach will keep the cost down so more people can take advantage of it.

www.bt-ag.ch

Tags: B&T
Posted in Weapon Accessories | 11 Comments »

TYRANT DESIGNS CNC | Glock 43 Extended Magazine Release

Tuesday, May 8th, 2018

Chicago, IL- Tyrant Designs CNC

Introducing their first product in a new & upcoming Glock component lineup, Tyrant Designs CNC has officially launched their Glock 43 Extended Magazine Release (G43 EMR).

Boasting a very aesthetic chevron design on the front, and a pocket cut design on the rear, Tyrant’s Glock 43 Extended Mag Release is a great looking product. Machined from 6061 aluminum and available in anodized Black, Red, Blue, Grey, and polished aluminum, this reversable G43 EMR is promised to operate just like your OEM release, just much better.

“ We are very proud to announce our first Glock component, the Glock 43 Extended Magazine Release! By utilizing our edgy Tyrant styling AND our ability to create great performing products, we know all customers will love this new G43 EMR. And we are please to say we will continue our aggressive expansion into the handgun market this summer!”

Per all the Tyrant Designs new product releases, this too is a limited production first run. So if you want one on your Glock soon you better get yours now!

SHOP THEIR EXTENDED MAG RELEASE NOW AT WWW.TYRANTCNC.COM.

Tags: Tyrant Designs CNC
Posted in Press Release, Weapon Accessories | Comments Off on TYRANT DESIGNS CNC | Glock 43 Extended Magazine Release

NRAAM 18 – ACR Owners Recoice! Bushmaster Introduces 450 Bushmaster and 6.8 SPC Kits

Sunday, May 6th, 2018

It seems like Bushmaster has been promising alternative caliber kits for the “the most versatile and reliable MSR ever built,” the ACR.

Designed from the outset for a quick, operator-level caliber change, Bushmaster announced two new caliber options: 450 Bushmaster and 6.8 SPC which join the already existing 5.56 NATO. Wait what? You read gat right. 450 Bushmaster and 6.8 SPC.