SureFire

Posts Tagged ‘Warrior Assault Systems’

Chase Tactical – Warrior Wednesday – Warrior Assault Systems Universal Pistol Holster

Wednesday, July 29th, 2015

W-EO-UPH-1

The Warrior Assault Systems Universal Pistol Holster (UPH) is a versatile adaptable holster that fully adjusts to accommodate a wide variety of large and small frame pistols.

W-EO-UPH-3

Adjustment is simple and quick by the use of a Velcro closure. Handguns are secured firmly by the use of a molded composite internal housing. The weapon is released by means of a push down thumb release.

W-EO-UPH-2

The rear of the holster has 3 rows of MOLLE webbing with 2 MOLLE arms, which allows it to be attached to a diverse range of Warrior Assault Systems gear such as the PLB belt, Frag Belts, Cobra belts and Rigger Belts. The Universal Pistol Holster’s MOLLE also allows it to be attached to plate carriers and chest rigs such as the Warrior Assault Systems DCS Plate Carrier.

W-EO-UPH-5

The Universal Pistol Holster is currently available in MultiCam, Coyote, OD Green, and A-TACS-FG.

All Warrior Assault Systems products are made from genuine U.S. Mil Spec materials and hardware.

Interested in carrying the Warrior Assault Systems product line? Click on the following link www.chasetactical.com/become-a-dealer or email Support@Chasetactical.com.

Chase Tactical – Warrior Wednesday – Warrior Assault Systems Low Profile Chest Rig

Wednesday, July 15th, 2015

W-EO-LPCR-1

The Warrior Assault Systems Low Profile Chest Rig (LPCR) is the latest in the line of low profile, high speed chest rigs from Warrior. The LPCR holds 4 – M4 style mag pouches in their elastic low profile mag pouches. There are extra rows on MOLLE webbing at either side of the LPCR which can accommodate a multitude of interchangeable Warrior pouches, such as pistol mags, radios pouches etc. The LPCR works particularly well with, Warriors PLB or Frag Belt combination to provide a lightweight Direct Action setup.

W-EO-LPCR-2

The unique feature about the LPCR is its ability to attach to Warrior’s new RPC (Recon Plate Carrier). Simply remove the shoulder and rear straps and all the remaining clips line up with the corresponding ITW clips located on the front and sides of the RPC Plate carrier, creating a scalable armor platform.

W-EO-LPCR-3

The Low Profile Chest Rig is currently available in MultiCam, Coyote, and A-TACS-FG.

W-EO-LPCR-4

All Warrior Assault Systems products are made from genuine U.S. Mil Spec materials and hardware.

Interested in carrying the Warrior Assault Systems product line? Chase Tactical is the North American distributor for Warrior Assault Systems. Click on the following link www.chasetactical.com/become-a-dealer or email Support@Chasetactical.com.

Chase Tactical – Warrior Wednesday – Warrior Assault Systems Pathfinder Chest Rig

Wednesday, July 8th, 2015

W-EO-PCR-1

The Pathfinder Chest Rig is the latest edition to the Warrior Assault Systems product line. Designed to work as a compact Chest Rig in stand-alone configuration or in conjunction with Warrior Assault Systems new RECON Plate Carrier System (RPC).

W-EO-PCR-2

The Pathfinder accommodates 4 x M4 style mag pouches with adjustable bungee retention which also allows AK mags to be easily changed out. There are 2 x small utility pouches, one at either side with elastic loops for storage of chem-lights, small flashlights etc. The front section comes as standard with Warriors Double Elastic Low Profile Mag pouches, these are attached with MOLLE and can be easily changed out for any of Warriors full range of pouches, such as our DPDA Double Pistol Mag pouch.

W-EO-PCR-5

The unique feature of the Pathfinder Chest Rig is its ability to attach to Warrior’s new RECON Plate Carrier. Simply remove the shoulder and rear straps and all the remaining clips line up with the corresponding ITW clips located on the front and sides of the RPC Plate carrier, creating a scalable armor platform for low and high vis operations.

W-EO-PCR-4

The Pathfinder Chest Rig is currently available in MultiCam, Coyote, and A-TACS-FG

W-EO-PCR-3

All Warrior Assault Systems products are made from genuine U.S. Mil Spec materials and hardware.

Interested in carrying the Warrior Assault Systems product line? Chase Tactical is the North American distributor of Warrior Assault Systems. Click on the following link www.chasetactical.com/become-a-dealer or email Support@Chasetactical.com.

Chase Tactical – Warrior Assault Systems RECON Plate Carrier

Wednesday, July 1st, 2015

Click to view .pdf
catalog template 1 copy

Chase Tactical, the North American distributor of Warrior Assault Systems, is happy to announce the launch of the RECON Plate Carrier. The RPC is the latest evolution of plate carriers from Warrior Assault Systems. Designed to be a lightweight and versatile low profile armor carrier, offering enhanced mobility without compromising protection.

RPC-3

The RPC has been developed to hold medium and large SAPI, ESAPI, and Shooters/Swimmer’s cut plates along with the most common 10″x12″ I.C.W. plates available. Plate pockets have been backed with 3D mesh for added ballistic performance, comfort and dispersal of body heat. The Recon Plate Carrier comes standard with ladder style cummerbunds that attach to the RPCs front via 2 removable ITW SR Clips. This allows rapid access when getting in and out of the RPC (ITW SR Clips have a combined breaking strength of 600lbs per side). The RPCs shoulders can be worn in 3 different configurations as a slick low profile with the addition of Velcro padded shoulders and wrap around sleeve for hydration and comms channeling.

RPC-1

The RPC comes as standard with a removable MOLLE front flap held in place by 2 vertical SQM clips and strong Velcro which allows the panel to be removed and replaced with a wide variety of pre-configured weapon-specific pouch panels and Warrior’s new Pathfinder Chest Rig. The RPC integrates with Warrior’s new Back Panel.

RPC-2

  • Made from Genuine U.S. Mil Spec Materials and Hardware.
  • 500D Cordura Performance Specifications
  • Weight: 7.1 Ounces per Square Yard
  • Tensile Strength: Warp 453 lbs / Fill 348 lbs
  • Tears Strength: Warp 14.1 + lbs / Fill 14.1 + lbs
  • Abrasion: Wear Cycles 1955
  • Water Repellency: 100%
  • RPC-4

    Webbing

  • Genuine US Mil Spec Webbing
  • 25mm (1 Inch) Breaking Strain: 1200 lbs
  • 38mm (1.5 Inch) Breaking Strain: 1800 lbs
  • 50mm (2 Inch) Breaking Strain: 2200 lbs
  • MultiCam Products now available with official MultiCam approved Murdock webbing.
  • Infra-Red Properties

  • All our Fabrics, Webbing, Plastic Hardware and Threads are treated at source to deliver the lowest I.R. Signature possible.
  • www.chasetactical.com

    Those interested in carrying the Warrior Assault Systems line can click on the following link www.chasetactical.com/become-a-dealer or email Support@Chasetactical.com.

    Chase Tactical Is Now The North American Distributor For Warrior Assault Systems

    Saturday, October 25th, 2014

    Chase Tactical has announced they are now the North American distributor for Warrior Assault Systems. The full release can be read below:

    Chase & Warrior Flyer

    Warrior Assault Systems & Chase Tactical are happy to announce that Chase Tactical will now be the North American distributors for Warrior Assault Systems. As Warrior Assault Systems continues to expand in the U.S. market it’s ready to bring their products to a much larger scale of dealers in the U.S. Warrior Assault Systems is a UK company whose products are all made from Genuine US Mil Spec Materials, Crye MultiCam and Murdock Webbing.

    With the new changes, Chase Tactical has implemented their own Direct Dealer Network which is in place and ready to go. Those interested or looking to carry the Warrior Assault Systems brand are asked to contact Chase Tactical at Support@ChaseTactical.com.

    chasetactical.com

    Warrior Assault Systems DCS Plate Carrier

    Thursday, May 8th, 2014

    DCS Plate Carrier MC 3

    May, 2014 – Chase Tactical & Warrior Assault Systems are pleased to announce that the Warrior Assault Systems DCS (Dynamic Combat System) Plate Carrier has been tested and recommended by the National Tactical Officers Association.

    This is big news for Warrior Assault Systems as it’s the first product to receive the NTOA Member Tested & Approved seal. The Warrior product line which is a UK based company is slowly establishing itself as an industry leader in producing high quality cost efficient products. The DCS scored 4.42 out of 5.

    The DCS Plate Carrier and its reviews are now listed on the NTOA Member Tested and Recommended online database.

    The full warrior product line can be found at www.ChaseTactical.com.

    Chase Tactical – Warrior Assault Systems Promotion

    Sunday, August 25th, 2013

    Starting tomorrow, Chase Tactical is holding their Warrior Assault Systems promotion. Each day a different Warrior Assault Systems product will be drastically reduced in price. The promotion is leading up to Chase Tactical’s Labor Day sale.

    www.chasetactical.com/

    Chase Tactical Medical Pack

    Thursday, June 20th, 2013

    20130618-143836.jpg

    This is a Medical Cargo Pack prototype that Chase Tactical has been working on with Warrior Assault Systems. This Medic pack will allow the medic to carry multiple IV bags along with a hydration bladder. The medic will have the ability to run IV lines through the bottom while still supplying a water line through a bladder system from the top. The pack butterfly open allowing the user to work from 4 large zippered mesh pouches which are separate from the hydration bladder spacing. On the front of the pack is a Medic Rip Off pouch. The Medic rip off pouch will easily allow the medic to access a rapid trauma pack which can include multiple tourniquets. This Medic Cargo Pack is currently going through the T&E process in the field and will allow the medic a whole range of potential applications. Stay posted for more pictures and updates of this pack.

    20130618-143849.jpg

    20130618-143903.jpg

    20130618-143915.jpg

    www.ChaseTactical.com