Wilcox BOSS Xe

Archive for December, 2013

LALO Tactical Footwear Preview

Friday, December 20th, 2013

Soldier Systems Daily was the given the opportunity for a hands-on look at the upcoming LALO Tactical Footwear line.

Shadow Tactical Boot
IMG_1899

The primary function of the Shadow is for use as a Special Forces Tactical Boot.

  • Patented composite plate
  • Contoured climbing arch
  • Injection molded EVA midsole
  • Soft EVA insole
  • Light-weight injected rubber outsole
  • Stealth approach articulating heel and outsole shape for assisting in noise reduction
  • Ceramic-coated SUPER FABRIC toe cap
  • 5″ microfiber H2O shedding synthetic leather upper w/ breathable membrane
  • Moisture-wicking, H20 shedding antimicrobial upper lining
  • Rip-stop nylon accents
  • Achilles flex notch
  • Sleek vamp profile for secure fin fit and climbing
  • Gusseted tongue with invisible lace pocket
  • Seamless, lightweight quarter protection construction
  • Hydro Recon BUD/S
    IMG_1900

    The Hydro Recon is a dynamic, quick-response shoe with minimalist feel for all surfaces.

  • Full drainage
  • Anti-inversion mid foot support and fit strap
  • Neoprene surf booty construction w/ medial zipper and anti-debris gusset
  • OCF Fit System
  • Ceramic-coated SUPER FABRIC toe cap
  • Hydro SQT BUD/S
    IMG_1872

    The Hydro SQT is the lightest BUD/S training shoe in the LALO line.

  • Anti-Inversion mid foot support and foot strap
  • OCF Fit System
  • Ceramic-coated SUPER FABRIC toe cap
  • Balls 30 Bloodbird BUD/S
    IMG_1863

    The Balls 30 Bloodbird functions as a mid-foot support shoe for all operators, all terrain, and all environments.

  • Fully articulated mid-foot support for dynamic fit
  • Anatomical lacing system
  • OCF Fit System
  • Ceramic-coated SUPER FABRIC toe cap
  • Anti-Inversion technology
  • Balls 30 Grinder BUD/S
    IMG_1864

    Mid-foot mobility shoe for all operators, all terrain, and all environments.

  • Anti-Inversion technology
  • OCF Fit System
  • Ceramic-coated SUPER FABRIC toe cap
  • IMG_1911

    The only model of shoe that wasn’t presented to us was the Balls 30 Recon. It functions as a dynamic, quick-response running shoe for all operators in varied terrain.

  • LALO OCF Fit system
  • Anti-Inversion Dynamic fit
  • Ceramic-coated SUPER FABRIC toe cap
  • Passive drainage system
  • Tri-Density Zodiac Foam Outsole
  • www.LALOtactical.com

    www.facebook.com/lalotactical

    KCRF Sticker Giveaway

    Friday, December 20th, 2013

    To celebrate the release of the Keep Calm and Return Fire sticker packs through Tactical Distributors, we are giving away five (5) sticker packs.

    20131219-104134.jpg

    Pack Includes:

    1 Black/White 3″x4″ Sticker

    1 Red/White 2″x3″ Sticker

    1 Tan/white 2″x3″ Sticker

    To enter:

    1. In the comments section of THIS article on SSD tell us what product you’d like to see emblazoned with the KCRF slogan next. Only entries here on SSD (not Facebook) are eligible to win.

    2. Comments are open from now until 2359 Zulu on 20 December, 2013.

    3. Use any alias you want to post but be sure to use a valid email address since that’s how we’ll contact the winners.

    4. Five (5) winners will be selected randomly from the comments we receive.

    5. One entry per email address. We will delete entries that violate this policy.

    6. Must be 18 to enter. Void where prohibited.

    Joint Service Camo and the National Defense Authorization Act for Fiscal Year 2014

    Friday, December 20th, 2013

    I keep getting emails from readers with links to stories from other websites with these silly headlines about new legislation blocking the Army’s ability to field new camo. I thought that the best way to put this to bed is to share the actual language in the National Defense Authorization Act for Fiscal Year 2014 with you so I asked the folks at Rising Tide if they could provide a copy and they were more than happy to oblige. Read the section in question for yourself and then we’ll discuss.

    CJCS visit to Afghanistan

    SEC. 352. REVISED POLICY ON GROUND COMBAT AND CAMOUFLAGE UTILITY UNIFORMS.

    (a) ESTABLISHMENT OF POLICY.—It is the policy of the United States that the Secretary of Defense shall eliminate the development and fielding of Armed Force specific combat and camouflage utility uniforms and families of uniforms in order to adopt and field a common combat and camouflage utility uniform or family of uniforms for specific combat environments to be used by all members of the Armed Forces.

    (b) PROHIBITION.—Except as provided in subsection

    (c), after the date of the enactment of this Act, the Secretary of a military department may not adopt any new camouflage pattern design or uniform fabric for any combat or camouflage utility uniform or family of uniforms for use by an Armed Force, unless—
    (1) the new design or fabric is a combat or camouflage utility uniform or family of uniforms that will be adopted by all Armed Forces;
    (2) the Secretary adopts a uniform already in use by another Armed Force; or
    (3) the Secretary of Defense grants an exception based on unique circumstances or operational requirements.

    (c) EXCEPTIONS.—Nothing in subsection (b) shall be construed as—

    (1) prohibiting the development of combat and camouflage utility uniforms and families of uniforms for use by personnel assigned to or operating in support of the unified combatant command for special operations forces described in section 167 of title 10, United States Code;
    (2) prohibiting engineering modifications to existing uniforms that improve the performance of combat and camouflage utility uniforms, including power harnessing or generating textiles, fire resistant fabrics, and anti-vector, anti-microbial, and anti-bacterial treatments;
    (3) prohibiting the Secretary of a military department from fielding ancillary uniform items, including headwear, footwear, body armor, and any other such items as determined by the Secretary;
    (4) prohibiting the Secretary of a military department from issuing vehicle crew uniforms;
    (5) prohibiting cosmetic service-specific uniform modifications to include insignia, pocket orientation, closure devices, inserts, and undergarments; or
    (6) prohibiting the continued fielding or use of pre-existing service-specific or operation-specific combat uniforms as long as the uniforms continue to meet operational requirements.

    (d) REGISTRATION REQUIRED.—The Secretary of a military department shall formally register with the Joint Clothing and Textiles Governance Board all uniforms in use by an Armed Force under the jurisdiction of the Secretary and all such uniforms planned for use by such an Armed Force.

    (e) LIMITATION ON RESTRICTION.—The Secretary of a military department may not prevent the Secretary of another military department from authorizing the use of any combat or camouflage utility uniform or family of uniforms.

    (f) GUIDANCE REQUIRED.—

    (1) IN GENERAL.—Not later than 60 days after the date of the enactment of this Act, the Secretary of Defense shall issue guidance to implement this section.

    (2) CONTENT.—At a minimum, the guidance required by paragraph (1) shall require the Secretary of each of the military departments—
    (A) in cooperation with the commanders of the combatant commands, including the unified combatant command for special operations forces, to establish, by not later than 180 days after the date of the enactment of this Act, joint criteria for combat and camouflage utility uniforms and families of uniforms, which shall be included in all new requirements documents for such uniforms;

    (B) to continually work together to assess and develop new technologies that could be incorporated into future combat and camouflage utility uniforms and families of uniforms to improve war fighter survivability;

    (C) to ensure that new combat and camouflage utility uniforms and families of uniforms meet the geographic and operational requirements of the commanders of the combatant commands; and

    (D) to ensure that all new combat and camouflage utility uniforms and families of uniforms achieve interoperability with all components of individual war fighter systems, including body armor, organizational clothing and individual equipment, and other individual protective systems.

    (g) REPEAL OF POLICY.—Section 352 of the National Defense Authorization Act for Fiscal Year 2010 (Public Law 111–84, 123 Stat. 2262; 10 U.S.C. 771 note) is repealed.

    Now my comments

    The hope has been that Congress would step in to curb the US military’s number of camouflage patterns from what averages out to about two per service, to a more manageable total of three or less for everybody. I hope you aren’t as underwhelmed as I am with the legislation. Any teeth that the original Enyart Amendment had to bring about any real change, seem to have been yanked from this document.

    Having said that, there are a couple of interesting bits. Such as…This section, which halts the Marine Corps’ restriction on sharing MARPAT:

    (e) LIMITATION ON RESTRICTION.—The Secretary of a military department may not prevent the Secretary of another military department from authorizing the use of any combat or camouflage utility uniform or family of uniforms.

    But this section is the free pass that the USMC has been looking for to continue to use MARPAT as long as they want:

    Nothing in subsection (b) shall be construed as—
    (6) prohibiting the continued fielding or use of pre-existing service-specific or operation-specific combat uniforms as long as the uniforms continue to meet operational requirements.

    My take is that this proposed law really does nothing to control the problem. It’s just another watered down version of the language from 2010 that it replaces. There are no deadlines to move to a common uniform or pattern as specified in Rep William Enyart’s (D-IL) (MG, USA NG, Ret) original amendment to the House version of the NDAA; no consequences to continuing on the current path. It’s status quo. Services can continue to use the patterns they already have and can utilize different pocket configurations and even different body armor. It’s the development of new patterns that is at issue and even this can be accomplished so long as it is done so under the banner of jointness. In fact, the language even encourages development of new patterns and technologies.

    The real question is how this will affect the Army’s Camouflage Improvement Effort and the USMC’s developmental Transitional MARPAT (yes, you read that right). Not that it really matters. The Army has zero interest in announcing the results of the so-called Phase IV Camo Tests and instead is in the midst of a soft-transition to the Operational Camouflage Pattern (aka Crye Precision’s MultiCam), a currently issued pattern. And so far, no one knows what will come of work being accomplished by NRL on behalf of the Marine Corps.

    If you want to know about all of the other defense programs, below is the entire 1105 page NDAA bill. It was recently passed by the House of Representatives and should clear the Senate today. The President is expected to sign it into law before Christmas.

    2014 NDAA

    Click on image to download .pdf

    There’s also some guidance on protective equipment early on in the bill. It’s worth looking at.

    A7 Helmet Systems Validates Blunt-Impact Performance Of Its ASH-22 BioRmr Suspension And Padding System

    Friday, December 20th, 2013

    (CHICAGO, Illinois, December, 2013) — A7 Helmet Systems, LLC, (“A7HS”), announced today that an independent laboratory has validated the extraordinary blunt-impact performance of the company’s ASH-22 BioRmr padding system for combat helmets. A7HS contracted an accredited third party, Chesapeake Testing Labs, to test the system in Advanced Combat Helmets (ACH) and tested it in accordance with AR/PD 10-02 Rev. A, Change 3, at all specified climate conditions (14oF, 70oF, and 130oF) at impact speeds of 10 ft/sec. and 14.1 ft/sec. The results showed that the average head acceleration for multiple impacts across all temperatures was 80.5G at an impact speed of 10 ft/sec., and 135G at an impact speed of 14.1 ft/sec. For context, the blunt-impact standard for padding systems currently used in the ACH is a maximum peak acceleration of 150G at 10 ft/sec., and the impact speed of 14.1 ft./sec. represents roughly a doubling of the impact energy. Accordingly, the ASH-22 BioRmr system meets the urgent needs of defense and law-enforcement agencies around the world for a practical and cost-effective way to improve the blunt-impact performance of ACHs and thereby help prevent or reduce the severity of blunt-impact induced brain injuries suffered by warfighters. The breakthrough was achieved as the result of an agreement between A7HS and U.K.-based D3O to share proprietary technologies related to impact-attenuation, including the exclusive use of D3O’s lightweight D3O Aero material in A7HS’s one-piece, adjustable ASH-22 design.

    “A7 Helmet Systems has always thrived on the challenge of developing the best possible suspension and padding systems for combat helmets and we are proud to be the first and only company to have developed a system that meets and exceeds the 10 and 14.1 ft/sec. design goals,” stated Kerry S. Harris, a former U.S. Marine who is a founder of the company and designs all of the company’s systems. “Warfighters need and deserve the highest level of protection against blunt impact related concussions and other types of brain injuries and the validation of the ASH-22 BioRmr means we are on track to field the system in the first quarter of 2014.”

    The ASH-22 BioRmr is an off-the-shelf, direct replacement for the 7-pad systems currently used in ACHs. It can be installed by a warfighter in the field in a matter of minutes without the use of any tools. The one-piece, multiconfigurable design means it can comfortably fit a wide variety of head shapes and helmet sizes while also providing optimum stability and airflow. “In designing a helmet suspension and padding system, there are a number of competing priorities, including blunt-impact protection, comfort, low weight, ease of use, durability, cost, and a small logistical footprint,” Harris said. “Besides providing unprecedented blunt impact performance and comfort for the warfighter, the ASH-22 excels in all of the other areas as well.”

    To maximize the blunt-impact performance of the ASH-22 BioRmr, A7HS turned to the experts at D3O Lab and selected the company’s new, lightweight D3O Aero material. D3O Aero is an innovative, shock-absorbing material that is based on non-Newtonian principles. In standard conditions the material’s molecules flow freely, but on impact, the molecules lock together to absorb and dissipate the impact energy. After reducing the force transmitted to the head, it instantly returns to its soft and flexible state. “Because we set out to design and build the most innovative padding system, it made sense for us to research and test the most advanced materials,” Harris added.

    “The lightweight D3O Aero proved to be a perfect fit and we look forward to quickly bringing the ASH-22 to warfighters throughout the world.” The agreement between A7HS and D3O Lab covers areas including development, production, marketing, and worldwide sales.

    One of the most remarkable aspects of the ASH-22 BioRmr is its consistent performance at high impact speeds and at extreme temperatures. For instance, it is generally accepted that a peak head acceleration below 150G would have a low probability of causing a concussive head injury whereas a peak acceleration of 400G is considered to be the limit for serious head and brain injury. In 2005, the USAARL tested the current 7-pad system at an impact speed of 14.1 ft/sec., after being conditioned at 130o F and recorded a mean peak head acceleration of 411G. By contrast, when tested by Chesapeake Labs under the same conditions and protocol, the ASH-22 BIORMR recorded a mean peak head acceleration of only 126.5G. In fact, the mean peak head acceleration recorded for the ASH-22 BioRmr was below 150G at all impact speeds and conditions and the highest recorded peak acceleration for any one of the eighty-four drops to which the system was subjected was 178G. “Considering how much money taxpayers spend to treat warfighters who suffer TBIs each year, let alone the devastating effects TBIs can have on warfighters and their families, those test numbers have real meaning and the ASH-22 BIORMR should be seen as a game changer,” Harris commented. “We look forward to working with D3O and government agencies throughout the world to provide this protective technology for the men and women who fight our wars and protect our streets.”

    www.a7helmetsystems.com

    Google Glass At The Gun Range

    Friday, December 20th, 2013

    This video purportedly created by a Google Glass wearing shooter has been making the rounds on the interwebz. The author is shooting a Springfield XD and a Title II AR-15 lower with a CMMG upper, Huntertown Arms suppressor, C-MORE red dot sight, and 50-round Black Dog Machine 22lr mag. The comments on the YouTube post are hilariously ridiculous. What do you think?

    Kaos Concealment Fusion-L Holster

    Thursday, December 19th, 2013

    20131127_081621

    Kaos Concealment’s Fusion-L (light bearing) holster is an IWB holster made to fit a Glock pistol with an Inforce APL. G-code clip or soft loop capable and fully ambidextrous, the Fusion-L features an adjustable ride height, adjustable retention, and a double high sweat guard. Holsters currently exist for Glock 17, 19, 22, and 23 pistols. Fusion-L models that accept alternate light systems to be added soon.

    www.kaosconcealment.com/products/kaos-fusion-l-light-bearing

    Desert Tactical Arms To Rebrand Company As Desert Tech

    Thursday, December 19th, 2013

    Leading Firearms Innovator Changes Name To Create Universal Brand

    Salt Lake City, December 17, 2013 – Desert Tactical Arms announced today that they are rebranding their company name to Desert Tech. The name change is essential to provide a universal brand that unites the arms, ammunition , and training divisions. The resulting unity will create synergies that will lead the development of more advanced equipment, munitions, and training for the expanded marketplace. The name change was announced today by Nick Young, President of Desert Tech.

    “The name change was essential to align the focus of our firearms, ammunition, and training companies in creating Tomorrows Weapon Technologies,” said Nick Young. “”Operating under our new name creates synergy between the companies which will allow us to seamlessly integrate new technologies and training methodologies with the warfighter, and ultimately, improve mission success.”

    www.deserttech.com

    Introducing the “Dave Royer Internet Rule”

    Thursday, December 19th, 2013

    From an email received from Larry Vickers:

    Gentleman it is my pleasure to formally announce the ‘Dave Royer Internet Rule’ or ‘Royer Rule’ for short;

    On any topic, in any blog or forum, on the Internet within the 5 initial posts someone with no personal direct knowledge of the subject matter will interject their unneeded 2 cents

    Classic examples of this are as follows;

    ‘Well I have never been there but…’

    ‘I don’t own one but…’

    ‘I have never actually seen one but…’

    Please spread this far and wide and feel free to interject where needed – like the famous Godwin’s Law