SureFire

Archive for the ‘Optics’ Category

AcroBat Tool from suppressortools.com

Wednesday, November 18th, 2020

Meet The AcroBat Tool…

The Aimpoint Acro red dot sight has an aluminum battery cover that can be scratched when using a steel screwdriver tip, so suppressortools developed the Acro Battery Tool.

It’s made from very robust injection mold quality ABS polymer, which won’t damage the battery cap’s finish AND a spare battery snaps into the handle. The hole at the end is for a parachute cord lanyard (not included).

One Renata CR1255 battery new in factory packaging IS INCLUDED.

suppressortools.com

Sneak Peek – SI Optic

Tuesday, November 17th, 2020

Strike Industries is teasing a Made in USA Red Dot Optic.

Nocorium – Camouflage For Your Night Vision Devices

Tuesday, November 17th, 2020

A few months ago the founder of new company Nocorium sought out to cover his NV devices I with a non-permanent material to break up their all-dark-exterior. He says he tested a bunch of different materials before settling on a vinyl material. At that point, it went from, “how do I cover these devices effectively to change their visual signature?”, to “hey, this can benefit a lot of night vision device users who are in need of such a product.”

He then proceeded to figure out how to get vinyl coverings that were suitable for the task, precisely cut for the devices they were meant right cover. He did one even better; these coverings are made from 100% USA sourced materials, manufactured in the USA, and support the USA supply chain and industry.

The first run of Nocorium NVG wraps comes in four MultiCam color variants. The upcoming production run will expand the line with Ranger Green, Coyote, and M81 Woodland.

For more information, visit Nocorium.com. Also, you can give @notorious_nocorium a follow.

Cooper Wins Top Tactical at Bushnell Southeast Regional Finale with Elite Tactical XRS II

Wednesday, November 11th, 2020

Elite Tactical XRS II Riflescope Helps Cooper Claim Tactical Division for PRS Season

OVERLAND PARK, Kan. – November 5, 2020 – Bushnell®, an industry leader in performance optics, served as title sponsor of the Precision Rifle Series (PRS) Southeast Regional Finale hosted by Alabama Precision. At the conclusion of the two-day match, Team Bushnell’s Mark Cooper and his Elite Tactical XRS II 4.5-30×50 riflescope once again stood victorious, winning the Tactical Division for the match and claiming the coveted Tactical Division championship for the entire season.

“It’s been a long but wonderful season and I know that I wouldn’t be here without the support of my family, friends and sponsors,” said Mark Cooper of Team Bushnell. “No one could have predicted the weather for the finale to be as bad as it was, but despite the cold and the rain it feels good to have accomplished a season long goal. Through it all, my Elite Tactical XRS II never failed me. The trust I have in this riflescope is unmatched and I don’t plan to shoot another match without it.”

The Bushnell Southeast Regional Finale took place under less than ideal conditions with a diverse course of fire challenging competitors and their gear. Throughout the match, competitors took on a multitude of barricades, moving targets and distances ranging out to 1,200 yards with the rain ending just as the last shots were fired.

“Alabama Precision was honored to host this year’s PRS Regional Finale sponsored by Bushnell,” said Jim Saunders, Match Director. “As the largest region, the southeast has some of the best competitors in the country. They were put through a true test with a challenging course of fire and equally challenging weather. Bushnell has supported the PRS for many years and has even bigger plans for the future with Elite Tactical. Thanks to Bushnell and the shooting community for a great Regional Finale.”

Be sure to follow Bushnell social media pages on Instagram at www.instagram.com/bushnell_official and Facebook at www.facebook.com/bushnell for event updates.

For more information on Bushnell Elite Tactical, visit www.bushnell.com.

Army Conducts Major Milestone Tests in Development of Integrated Visual Augmentation System

Monday, November 9th, 2020

FORT BENNING, Ga. – The Army-led team of developers creating the Integrated Visual Augmentation System is wrapping up the third major milestone testing and demonstration event this week at Fort Pickett, Va., where Soldiers and Marines have been putting the system, known as IVAS, through a number of field exercises since Oct. 18.

IVAS is designed to enhance the lethality and survivability of the Army’s Close Combat Force through a combination of technologies and augmented reality capabilities delivered in the form of a Heads-Up Display device, much like the famed HoloLens developed by Microsoft, which is, in fact, partnering with the Army to develop and produce the system.

IVAS is one of the Army Future Command’s 31 original signature modernization efforts, headed by the Soldier Lethality Cross Functional Team (SL CFT) at Fort Benning, Ga., under the leadership of Brig. Gen. David Hodne, who also serves as the Chief of Infantry. It’s a single platform that allows the Soldier to fight, rehearse, and train, because it leverages networked information sharing and mixed and augmented reality technologies. IVAS is one of the SL CFT’s efforts to help resolve an erosion in combat superiority between

U.S. and near peer competitors around the world as identified in the 2018 National Defense Strategy.

Whereas U.S. forces once “owned the night” in respect to combat overmatch in conditions of limited visibility, Hodne said, two decades of consistent and concentrated conflict across the Middle East has resulted in a parity among the world’s most capable combatants.

“Overmatch has always been defined in terms of two things; our lethality and our protection must exceed the lethality and protection of our adversaries,” Hodne said Oct. 30, as he addressed a group of Army senior leaders and Congressional representatives who attended the IVAS demonstration at Pickett. “In order to restore overmatch, we must restore lethality, and lethality means we can see, designate and move quickly through hours of limited visibility.

“In an environment where we share the night, the folks who can move faster, decide faster and think faster are the ones who have the advantage on today and tomorrow’s battlefield,” he said, citing the IVAS next generation situational awareness tools, high resolution operational and training simulations capabilities the Soldiers are testing at Pickett.

The event is the third in a series of four comprehensive large-scale tests, formally known as Soldier Touch Points, or STPs, scheduled at pivotal junctures in the 28-month program to bring together stakeholders from across the Army’s modernization enterprise with industry partners to assess technologies added or upgraded since the previous STP and test the latest system prototype in the field. This time around, participants from the 82nd Airborne Division and a contingent of Marines conducted company-size training events using the first militarized prototype of the IVAS. Events included land navigation, live fire, mission planning, rapid target acquisition, trench clearing, after action review using augmented reality, and more.

By the end of this event, Team IVAS, which includes the CFT, PEO Soldier, Microsoft, Combat Capabilities Development Command, and a number of labs and directorates within the modernization enterprise, will have collected more than 40,000 hours of Soldier data, said Brig. Gen. Tony Potts, the director of PEO Soldier.

The team employs a Soldier Centered Design methodology that involves Soldiers at every step of the process, from design to development, thereby reducing the traditional 10-year acquisitions timeline to roughly 28 months and eliminating the historical probability of fielding a system Soldiers reject. Soldier Centered Design means IVAS is designed and built by the Soldiers who give the constructive, candid feedback developers use to turn over new prototypes and upgrade systems constantly.

“If we want to develop systems at the speed of relevance, and systems that our Soldier want to use, this is the way we have to do it,” Potts said. “We have learned so much through Soldier Centered Design. Our real desire is to let Soldiers design it, and then our engineers build what they design. It’s about listening to our Soldiers.”

The STP was Staff Sgt Kaleb Kester’s first experience with IVAS and with the concept of Soldier Centered Design. After 12 years in the Army, the combat veteran said he sees “incredible potential” for the system and had no trouble learning to use it. “If you can use a smart phone, you can use IVAS,” he said, but there was one thing he didn’t understand.

“Why haven’t we always been doing it this way? I hate getting issued things I don’t even want or don’t need or can’t really use,” Kester said. “This is the way it should always be.”

The program, which remains on track to deliver the first IVAS in the fourth quarter of FY21, is funded through Other Transaction Authorities (OTA) and Middle Tier Acquisition Rapid Prototyping authorities to accelerate the development process by more than four years as compared to the DoD 5000 process.

Last month, Undersecretary of Defense for Acquisition and Sustainment Ellen Lord hailed IVAS as an example of success, having launched the program under an interim policy she implemented to circumvent problems inherent to traditional military acquisitions methodologies aimed at layered governance and risk aversion. In September, Deputy Secretary Norquist signed a directive that completes a comprehensive redesign of the DoD 5000 series acquisitions policies.

“So using this (interim) policy, we have 74 programs today using the middle tier acquisition pathway, including (IVAS),” Lord said Oct. 7 during a Pentagon briefing. “As a result, IVAS intends to rapidly field the capability in fiscal year 21 after conducting dozens of hardware prototypes and thousands of software builds through continuous iterations with Soldiers … the MTA pathway incentivizes powerful behaviors across the acquisition enterprise to quickly restore the Army’s advantage in individual situational awareness, navigation, communications, and target acquisition.”

Army Chief of Staff Gen. James McConville said virtually the same last week after participating in the IVAS STP 3 demonstration, where he donned the IVAS to see firsthand how the system pairs to the Family of Weapons Sight – Individual to give the warfighter the ability to acquire a target from behind the relative security of a corner or an obstacle using the aided target acquisition capability.

Twenty years ago, McConville said, such capabilities would have been considered futuristic, “something you see in a movie,” and the acquisition timeline would have impeded progress.

“Historically, our acquisition cycle has taken a long time, ten to fifteen years,” he said. “(IVAS) was just an idea two or three years ago, and we were able to bring it to fruition quickly to what we saw today working together with industry, with our operators, and also our Soldiers with touch points along the way using the authorities that Congress has given us to rapidly, bring this capability to our Soldiers in the field. It’s safe to say that the future is here – now – and this is no longer in the realm of science fiction.”

Lt. Nicholas Christopher was one of the Soldiers from the 501st Parachute Infantry Regiment who put the system to the test in hinterlands of Fort Pickett’s operationally relevant environments. Christopher described the IVAS suite of capabilities just as the Chief of Staff.

“There are a lot of features on it that are futuristic, I guess you could say, including things like advanced battle tracking,” he said. “I can see where my entire platoon is projected on a map, and for me as a platoon leader, that’s amazing, because there’s a lot of guesswork that goes out the window. There’s a lot of verbal communication over radios that I don’t have to do anymore. It’s very solid I can see how this is going to make a great impact on the way we fight.”

By Bridgett Siter

SIG SAUER TANGO6T Riflescope Selected by U.S. Department of Defense for Direct View Optic (DVO)

Monday, November 9th, 2020

NEWINGTON, N.H., (November 9, 2020) – SIG SAUER, Inc. is proud to announce the TANGO6T has been selected by the U.S. Department of Defense for the Direct View Optic (DVO) in response to a solicitation to enhance squad performance with a variable powered riflescope.  Unlike older generation non-magnified or fixed-magnification optics, the TANGO6T is a 1-6X variable-magnification riflescope that enables the soldier to engage both close quarter targets and targets at extended ranges.

This award from the U.S. DoD is the third award for the SIG SAUER TANGO6T; previously selections for the TANGO6T include the Squad Designated Marksman Rifle (SDMR) and the USSOCOM Squad-Variable Powered Scope (S-VPS).  The TANGO6T riflescope is currently in use with the U.S. Army Squad Designated Marksman and U.S. Military Special Forces.      

“After rigorous and stringent testing, where the best of the industry competed, we are proud to confirm the SIG SAUER TANGO6T riflescope has been selected by the U.S. Army as the Direct View Optic,” began Ron Cohen, President and CEO, SIG SAUER, Inc.  “This is a three-peat for the TANGO6T as the riflescope continues to prove it will withstand the rigors of U.S. military testing making it the choice for use with our soldiers.  The further proliferation of the riflescope into the U.S. Military’s M4A1 operating system is an exciting achievement for SIG SAUER Electro-Optics and further proof that the TANGO6T is the direction of the future.”

The TANGO6T 1-6×24 DVO riflescope will be used on M4A1 carbines and is a first focal plane ruggedized riflescope with a Flat Dark Earth (FDE) anodized aircraft grade aluminum main tube.  The riflescope features the DWLR6 reticle capable of providing range estimation and wind holds at extreme distances, the advanced HELLFIRE illumination system for fast target acquisition, a locking illumination dial, Power Selector Ring (PSR) Throw Lever, the ALPHA4 ultralight mount, and a laser-marked scope level indicator for intuitive installation.

“The TANGO6T riflescope platform has been ruggedized and battle-hardened over the course of both the SDMR and S-VPS programs,” added Andy York, President, SIG SAUER Electro-Optics.  “We are proud to assemble the TANGO6T here in the USA to support our warfighters with a variable powered riflescope that was developed to match the engagement requirements of today’s battlefield.”

The SIG SAUER TANGO6T 1-6x24MM riflescope is available commercially at local retailers and at sigsauer.com, in first and second plane, and varying reticles including 5.56/7.62 Horseshoe Dot, HELLFIRE MOA Milling, HELLFIRE FL-6 and the new DWLR6.   

“This award solidifies the TANGO6T as the premier riflescope of the U.S. military as it continues to exceed the highest standards for ruggedization, range, and accuracy throughout testing protocols, and in the field with our soldiers.  We are honored to partner with the U.S. Department of Defense as they continue to modernize their weapons systems and look forward to the continued proliferation of the TANGO6T amongst our fighting forces,” concluded Cohen.

All SIG SAUER TANGO6 riflescopes are designed and assembled in the USA at the state-of-the-art, ISO-certified, SIG SAUER Electro-Optics facility in Wilsonville, Oregon.

L3Harris Technologies Receives First Delivery Order for the US Army’s Next Generation Rifle-Mounted Aiming Laser

Thursday, November 5th, 2020

Highlights:
• The first production delivery order for the STORM 2 contract
• The company will deliver more than 1,100 combat-ready systems to the U.S. Army
• STORM 2 enables a soldier to perform laser ranging and target hand-off operations in all battlefield conditions

LONDONDERRY, N.H., Nov. 5, 2020 — L3Harris Technologies (NYSE:LHX) has received the first order on its multi-million dollar contract from the U.S. Army for the Small Tactical Optical Rifle-Mounted Micro Laser Rangefinder 2 (STORM 2). L3Harris will deliver more than 1,100 combat-ready systems to the Army. This is the first production delivery order associated with the $215 million STORM 2 contract the company announced in 2019.

“STORM 2 represents a next-generation laser technology that enables the soldier to perform laser ranging and target hand-off operations in all battlefield conditions,” said Lynn Bollengier, President, Integrated Vision Solutions, L3Harris. “Our STORM portfolio has been a staple of the U.S. Army’s laser rangefinding capabilities for more than 15 years and we are proud to continue delivering combat-ready systems that provide a tactical edge for our soldiers.”

The company’s STORM 2 is the next advancement in rifle-mounted, multifunction laser systems that provide soldiers with heightened performance and enhanced visibility at extended range during field maneuvers, surveillance and engagement, while remaining undetected during dismounted and vehicle- mounted missions.

www.l3harris.com

Shield Sights Announces Next Generation RMS2

Wednesday, November 4th, 2020

For Immediate Release – Dorset, England, U.K. – Shield Sights, Pioneer of compact micro red dot optics is pleased to present the newest edition of Refex Mini Sight, the RMS2.

Building on the foundation of the original RMS, that was designed for competitive shooters, the RMS2 brings features that increase performance for the defensive carry, shooting enthusiasts, and competitors alike. The Shield RMS2 features a strengthened lens housing and updated electronics with improved battery contacts to further enhance reliability under all conditions. The same glass coated polymer lens continues to provide a good balance of being shatterproof while remaining more scratch resistant than an all polymer lens option. Customers have the option to upgrade to an all glass lens if maximum scratch resistance is required.  

The RMS2 has been designed without a battery draw to further strengthen the housing and remove any additional failure points in an EDC product. Shields superior footprint includes four location posts and two screws to ensure a consistent and secure interface to hold the sight in place. This system has been proven to be extremely repeatable when sights are removed to renew batteries and when combined with a long battery life has removed the need for the side access battery drawer.

“The explosive growth in the RDS market for concealed carry and general range use has presented new variables that we were eager to consider in the design of the RMS2,” said James White, CEO Shield Sights. “The advancements in technology and additional research in the field has given us the ability to design and deliver an overall better product for the majority of RDS shooters out there”

RMS2 Features:
– Shield footprint
– Glass coated polymer lens (can be upgrade to all Glass)
– Strengthened lens housing
– Updated electronics
– 4 MOA and 8 MOA dot options
– 1-3 year battery life

The RMS2 is currently available for sale through the Shield dealer network or on the Shield website: www.shieldpsd.com

MSRP: $430