FirstSpear TV

Archive for the ‘Weapon Accessories’ Category

The Magpul MOE Bipod

Tuesday, January 11th, 2022

The new MOe Bipod is built for use with wide or narrow forends or M1913/M-LOK adapters using the Uncle Mike’s pattern QD sling studs.

Features

•Incredibly strong, injection-molded polymer legs

•8oz weight

•Extremely low stack height of 1.73” folded

•Uncle Mike’s sling stud can be added to bipod rear for sling mounting

•Legs adjust in 1/2-inch increments from approximately 7 to 10 inches

•Easily attached and detached with large center knob

•Easily deployed without buttons or levers and the legs lock in the down position

•Removeable non-slip rubber feet that include a hole pattern compatible with common aftermarket feet

Offered in Black and FDE.

www.Magpul.com

Magpul SL Stock – HK94/MP5

Monday, January 10th, 2022

For those of you familiar with Magpul’s Arm Brace for the MP5, you’ll recognize this execution of a fully functional stock.

Features:
-Toolless, one-handed LOP Adjustment
-Ambidextrous QD cup for sling mounting
-High-strength polymer and corrosion resistant metal components
-Checkered butt-plate and removable butt-pad
-Compatible with MOE SL Enhanced Rubber Butt-Pad, 0.70″ (MAG349)

Offered in Black, because everything associate with the MP5 family is Black.

Note: Compatible with HK94/MP5/SP5 pattern pistols. NOT compatible with HK91/G3 pattern firearms or “K-Length” receivers.

New from Magpul – MOE SL-M Carbine Stock

Monday, January 10th, 2022

Initially designed for a US Army Next Generation Squad Weapon candidate, the MOE SL-M Carbine Stock is a bit shorter than what you are used to seeing.

Turns out, it’s also great for use with PDWs and is optimized for Mil-Spec PDW length receiver expressions. It will still fit full length “buffer tubes”, but the front end of the stock will not meet up with the receiver.

Despite its smaller stature, it’s got all of the Magpul bells and whistles.

-Internal release latch feature mitigates rattle and wobble
-Ambidextrous shielded adjustment lever
-Angled toe for easy shouldering
-Non-slip rubber butt-pad
-1.25″ ambidextrous sling loop
-Accepts M-LOK QD Sling Mount for QD sling swivel capability

It will be offered in Black and FDE.

www.Magpul.com

XS Sights Introduces New Armorers Block for AR Platforms

Wednesday, January 5th, 2022

Fort Worth, Texas (January 4, 2022) – XS® Sights is pleased to introduce its newest armorers block for AR platforms. The XS AR Upper & Lower Receiver Armorers Block is designed to allow gunsmiths or do-it-yourself enthusiasts to hold an AR-15/M4, AR-10, SR-25 or DPMS GII receiver in a bench-mounted vise to assemble, modify or maintain almost every AR pattern modern sporting rifle available.

“Most armorers blocks will only fit one specific style AR rifle,” said Addison Monroe, Marketing Manager for XS Sights. “Our gen 2 block provides versatility, allowing the user to work on upper and lower receivers of almost any AR pattern rifle. It’s virtually a one-size-fits-all solution.”

Made in the USA from 6061 T6 aluminum, the versatile, durable, and reliable XS Armorers Block comes with pins to lock in the receiver and fitment screw for the AR 15 lower. To allow bracing into the mag well of AR10 lowers, XS offers a 3D printed adaptor plate for purchase. For those who prefer to print their own, access to prints for the adaptor plate are available free of charge at xssights.com. The Armors Block works with a DPMS patterned 308, DPMS GII, Armalite Rifle, and standard AR 15/10 pattern rifles.

Retail Price: $83.00

For more information, visit www.xssights.com.

Forward Grip Assembly from Bobro Engineering

Friday, December 31st, 2021

The Bobro Engineering Forward Grip Assembly is designed to be used as a monopod and as a barricade stop.

It uses a new attachment method that utilizes opposing forces in a diagonal plane to secure the unit. Additionally, the left and right sides of the grip are designed to allow the unit to be firmly secured in a clamping head on a tripod.

To mount:

Rotate the drive wheel until the driver plate is allowed to retract under spring pressure. Push the grip assembly onto the rail when the rail is between the two outer locking walls (at approximately 45 degrees) then rotate the unit until a tactile engagement is felt. Then, simply rotate the lock wheel until it stops. It is now totally secure. Due to an internal compression bearing design, it remains secure throughout firing and use.

www.bobroengineering.com/Forward-Grip-Assembly

ISOtunes Sport Debuts DEFY Slim Basic Earmuff for Firearm Enthusiasts

Thursday, December 30th, 2021

Carmel, IN – The latest in the ISOtunes Sport line for competitive shooters and hunters, the DEFY Slim Basic boasts high-performance hearing protection in a no-frills, ultra-slim design.

 

ISOtunes’ proprietary Tactical Sound Control amplifies hearing by 8x and protects against high-impact noises, while SafeMax Technology limits volume output to 85dB for all-day, damage-free listening. The DEFY Slim Basic sports a streamlined design for maximum comfort and featherlight performance. IPX4 Durability guarantees sweat and water resistance for shooting in any conditions. DEFY Slim Basic muffs are powered by two AAA batteries for up to 300 hours of distraction-free shooting.

ISOtunes Sport products protect and enhance hearing with innovative options for sport shooters who demand safety without sacrificing performance. To learn more about the DEFY Slim Basic and browse the full ISOtunes Sport lineup, visit www.ISOtunesSport.com.

Blue Force Gear Gives You Tail, That Doesn’t Suck!

Tuesday, December 28th, 2021

BFG innovation gives you a sling with the longer adjustment range you want without the downsides found in older tail slings – You said, “Give Me Tail” and our GMT Sling delivers!

[POOLER, GA, December 21, 2021] For 15 years, Blue Force Gear has provided our legendary tail-less Vickers SlingTM as the optimal sling for battlefield use. We are proud that our go-to favorite VCAS® is the standard issue sling in elements across the US Military to include the USMC. That said, some very dialed in Blue Force Gear customers got hooked on tail early on in their gunfighter life and just never could break free. They like the longer adjustment range of the loose ended two-point slings and were willing to put up with all the downsides to keep getting the tail they want. In many cases these shooters are our friends and they seemed to genuinely feel bad that they can’t break the tail habit and jump on the BFG VCAS train. So, we decided to offer them a better choice. We looked at a lot of tails and carefully listened to why some of our best customers in the SOF world can’t go tail-free. After years of development, we can now offer them the best tail they ever had: The Blue Force Gear GMT Sling.

In case you never tried a two-point tail sling here is how BFG innovated solutions to the known downsides:

Old Tail Sling Adjusters – Some older slings use the old ALICE Pack strap adjuster which has a spring that can fail, and Murphy will pick an inopportune time. The quickest way to deal with the busted spring: tie a knot in your tail and lose adjustability. Some tail sling makers avoided the spring issues by using ladder lock adjusters also borrowed from pack applications. It was a nice try but the adjuster lift tab for lengthening can catch on gear like radio antennas and unexpectedly zip your sling out to full length.

BFG Optimized Tail Sling Adjuster – We started from scratch and developed a two-piece adjuster purpose built for weapon sling use. It has no spring to fail and has no extended-release tab to catch on things and cause unexpected sling opening – failure points eliminated!

Old Tail webbing – We’ve seen loose tails in front of muzzles (yes, you get your tail shot off!), behind the trigger (no bueno during gunfights) jammed into magwells over top of a fresh mag (show-stopper – took two people to get the wedged mag out), flipped up in front of the optic (a problem when lead is flying both ways.) In addition to going bad places, the thin standard webbing just feels terrible on your neck.

BFG Superior Tail Webbing – Our custom thicker webbing keeps the tail from easily finding its way into bad spots and increases comfort and durability. Our thicker tail is better!

Now, for the first time ever, you have the choice of a tail or a captured tail design sling from the maker of the finest weapons slings in the world. You said, “Give Me Tail”, so we did.

www.blueforcegear.com/gmt-sling

Blue Force Gear, Always Better.

UNITY Tactical Announces FAST COG Series Mount

Thursday, December 23rd, 2021

UNITY Tactical is proud to announce the next addition to the FAST Optic Lineup.  The FAST COG Series Mount is designed to work with the Trijicon ACOG and VCOG series of magnified optics.  These scopes have a storied history of service with War fighters, Peacekeepers, and Patriots. 

Our new FAST COG Series Mount is designed to bring these optics up to gunfighting height.  Like all FAST mounts, the FAST COG Series Mount raises the optic up to a height more conducive to use while wearing plate carriers, helmets, and communication headsets.  It places the optical centerline at 2.05” above the rail. 

Just like the FAST LPVO Series Mounts, the FAST COG Series accepts the full FAST Offset Accessory Mount suite.  This allows users to securely bolt a miniature red dot at a 35 degree angle off the side for rapid transitions.  The Offset Accessory Mount suite places mini red dots at the same 2.05” above the rail as the FAST COG Series Mount.  The COG Series Mount has two mounting positions for the FAST Offset Optic Base.

Interface: Trijicon VCOG/ACOG Footprint

Height: 2.05” to Optical Center Line

BUIS: Optional Offset Rear BUIS

Rail Mount: 3 Cross Bolt Rail Grabber

Material: 7075 T6 Aluminum

Coating: Type III Hardcoat Anodized

Dimensions: 3.65”(L) x 1.22”(W) x 1.05”(H)

Weight: 2.9 oz.

The FAST COG series is available in Black and FDE at UNITY dealers and at www.unitytactical.com.