Weapon Accessories | Soldier Systems Daily Soldier Systems Daily

Archive for the ‘Weapon Accessories’ Category

MATBOCK Monday: 60mm & 81mm Mortar Training with the MWAD

Monday, September 1st, 2025

Over the last few months we have been out with various units conducting mortar training using the digital indirect fire sight called the Multi-weapon Aiming Device (MWAD).

Software Integration with ATAK & NettWarrior:

The MWAD utilizes the current NettWarrior Tactical Scalable Mobile (TSM) adhoc network and NettWarrior DAPS Gen2 Navigation set for secured communication and PNT (Position Navigation and timing).

Another cool feature is the Dismounted Assured, Positioning, Navigation, and Timing System (DAPS) gen2 utilizes Bluetooth Low Energy (BLE) which would allow the MWAD to connect to the only GPS in the world that uses the new M-code (military code). Currently, gun lines use the DAGR, which is an easily jammed p/y code.

The MWAD can already function on the NettWarrior ensemble and is ready for the DoD’s next generation of M-code satellite vehicles.

60mm with DAPs:

81mm Training:

To schedule your demo, please reach out to the MATBOCK sales team at sales@matbock.com

Posted in Advertiser, Guest Post, Sensors, Weapon Accessories | Comments Off on MATBOCK Monday: 60mm & 81mm Mortar Training with the MWAD

Reptilia Expands AUS Mount Systems with New RMR Footprint

Thursday, August 28th, 2025

Hillsborough, NC – AUG 28th 2025 – Reptilia®, an industry leader in premium firearm accessories, is proud to announce the release of the AUS Offset for RMR, a purpose-built solution for rapid target engagement and secondary sighting. Engineered with the same attention to detail and rugged reliability as the entire AUS Mount System, this new configuration adds compatibility with the widely adopted Trijicon RMR® footprint.

Built for Speed. Designed for Precision.

The AUS Offset for RMR is designed to integrate seamlessly into the AUS platform, giving shooters a fast, ergonomic, and dependable offset optic solution.

Key Features:

Trijicon RMR® compatibility – fits RMR and other MRDS with the same footprint
Fully reversible design – 4 mounting locations, left- or right-side configuration
Precision machining – 7075-T6 aluminum, Type III hardcoat anodized
Optimal angle – 37º offset from vertical for natural transitions
Ultra-lightweight – just 30 grams
Made in the USA – backed by Reptilia’s full lifetime warranty
Available now – Black and Flat Dark Earth anodized finishes

“The AUS Offset for RMR brings a new level of versatility to our optic mounting ecosystem, whether in competition, defense, or duty applications, shooters can rely on its strength, lightweight profile, and precision fit to deliver when it matters most.”

– Reptilia Team

The AUS Offset for RMR is now shipping!

BUY NOW

Posted in Advertiser, Optics, Press Release, Weapon Accessories | Comments Off on Reptilia Expands AUS Mount Systems with New RMR Footprint

Rotapoint’s Watch Cap is a Game-Changer in Target Engagement Speed

Wednesday, August 27th, 2025

Already in the hands of winning teams, the Watch Cap™ redefines red dot positioning for professional shooters and is now officially patented and available.

Watch Cap™ at Chaos Concepts’ Legion Team Sniper Challenge

Ashburn, Va. (August 2025) — Rotapoint Systems LLC, designers and manufacturers of advanced sighting solutions, proudly announces the official launch of its Watch Cap™, a precision-engineered, bore-concentric optic mounting solution designed to help snipers transition to magnified optics with unprecedented speed—without sacrificing situational awareness. Quietly adopted by top-tier military shooting teams over the past year, as well as the Royal Canadian Mounted Police, the Watch Cap has already proven itself on the podium, earning top placements in some of the world’s most demanding sniper competitions.

“The Watch Cap has changed the way elite shooters approach high-pressure environments. When seconds count, it’s the difference between acquiring a target or missing a window of opportunity,” said Dave Sugg, founder of Rotapoint Systems. “Like our entire product line, we designed it to give shooters every possible edge—and it’s already outperforming expectations on the field.”

First introduced at SHOT Show 2024, the Watch Cap has helped win:

Chaos Concepts’ Legion Team Sniper Challenge – 1st, 2nd & 4th Place (May 2025)
Special Operations Warrior Foundation’s Heart Mountain Challenge, Cody, WY – 1st Place (June 2025)
Nightforce ELR Steel Challenge, Glenrock, WY – 2nd Place (July 2025)
Kinetic Comps’ Marathon Mountain Sniper Challenge – 1st Place (July 2025)

At multiple events, shooters running Watch Caps outperformed those who didn’t—sometimes even overcoming more experienced competitors. The message is clear: a Watch Cap may be the force multiplier you didn’t know you needed.

The product is now officially patented (U.S. Patent D1,083,008 S, with additional patents pending) and continues to grow in popularity across the competitive and professional sniper communities. Designed and machined in the USA from aircraft-grade 7075-T651 aluminum and finished with Type III hardcoat anodizing, each model is precision machined to withstand the rigors of operational environments.

Watch Cap Models (MSRP $129.95 unless otherwise noted):

34mm Geissele® Super Precision & Reptilia® AUS Mounts / RMR Footprint – RH
34mm Nightforce® Mounts & Rings / Aimpoint® Acro® Footprint – Ambi
35mm Badger Ordnance® C1 Mounts / RMR Footprint – RH
34 & 35mm Badger C1 / Acro – Ambi
35mm Leupold® IMS Mounts / DeltaPoint Pro Footprint – Ambi
30mm Nightforce Mounts & Rings / DPP – Ambi
34mm Nightforce Mounts & Rings / RMR – LH & RH
34mm Seekins® / Vortex® CM-534Mounts / DPP – Ambi

NEW for Summer 2025:

Watch Cap™ for Spuhr® Rings & Mounts – Acro Footprint (MSRP $74.95)

This newest variant features a proprietary wedge shape for optimized red dot positioning on Spuhr mounts, allowing simultaneous use of a front-mounted laser range finder and a rear red dot. Weighing just 0.6 oz and made in the USA from 7075T651 aluminum, this model was used on every stage by the winner of the 2025 Heart Mountain Challenge.

For more information, visit www.rotapoint.com.

Posted in Optics, Press Release, Weapon Accessories | Comments Off on Rotapoint’s Watch Cap is a Game-Changer in Target Engagement Speed

XS Minimalist Night Sights Now Available for Colt Python Revolvers

Wednesday, August 20th, 2025

Fort Worth, Texas (August 19, 2025) – XS Minimalist night sights are now available for Colt Python revolvers. True to their name, Minimalist sights are designed for shooters who want a simple and effective notch and post sight with no extra frills.

The front sight features a tritium center surrounded by a glow dot that comes in two color options – green or orange – to best suit individual preference. The windage adjustable rear sight is a serrated, blacked-out anti-glare notch with a wider width to help drive your eye to the front and quickly align your sights.

“The serrations in the rear of our Minimalist sights drive focus downrange,” said Jeff King, Marketing Manager, XS Sights. “With our bright front sight, upgrading factory sights with XS sights makes these revolvers all the more effective by driving your eye to the target for faster acquisition and improved accuracy.”

Retail Price: $137.99

XS sights are backed by a Limited Lifetime Warranty. The company also offers a 12-year illumination warranty on all tritium products. For more information, visit www.xssights.com.

Posted in Press Release, Weapon Accessories | Comments Off on XS Minimalist Night Sights Now Available for Colt Python Revolvers

Sneak Peek – Spectre ISR Rail System

Tuesday, August 19th, 2025

Coming in October, the Spectre ISR Rail System from ArmorForge.

A next-generation DMLS rail platform purpose-built for the Sig Rattler MCX and LT series, engineered for clandestine special operations and extreme suppressor use.

Launch: October 2025 for Sig Rattler MCX 5.5”, followed by LT-compatible systems.

Technical Highlights:

•Precision Additive + Subtractive Manufacturing – DMLS titanium (TI-64) frame, finish-machined to aerospace tolerances.

•Proprietary Nano-Coatings – Reduces thermal transfer and resists environmental degradation.

•Suppressor-Optimized Geometry – Accommodates suppressors up to 1.85” diameter without compromising rail integrity purpose built for next-gen scalable options

•Enhanced SURG Performance – Designed to maintain operational performance under sustained suppressed fire.

•Extreme Thermal Mitigation – Significantly reduced heat signature and operator heat exposure during prolonged engagements.

•Ultra-Lightweight – Weighs only 0.58 lbs while maintaining high rigidity.

•Structural Stability – Reduced deflection, enhanced rail laser zero retention over stock configurations.

•Nano-Lattice Surface Texture – Provides improved grip without added bulk or weight.

Posted in Weapon Accessories | 1 Comment »

GBRS Group Ready to Support DOD & Federal Law Enforcement with End-Of-Year Procurement

Monday, August 18th, 2025

Virginia Beach, VA — 18AUG2025 – As the 2025 Fiscal Year closes, GBRS Group is prepared to ensure Department of Defense (DOD) units and Federal Law Enforcement agencies maximize their remaining budgets with immediate access to mission-critical equipment.

GBRS Group has successfully fulfilled orders in recent weeks for all branches of the U.S. Military and multiple Federal agencies. With products in stock and ready to ship worldwide, our team is positioned to deliver without delay, ensuring units can procure and receive gear before year-end spending deadlines.

Featured, field-proven systems available now include:

· Hydra Mount – Industry-leading optic and accessory mounting solution engineered for precision and durability in any environment.

· Lerna Mount – Versatile, ultra-low-profile mounting platform for enhanced operational flexibility.

· Exclusive AXON Switches – GBRS-spec, unique control interfaces for optimized weapon light and laser activation.

· Modular Chest Rigs – Configurable load-carriage platforms designed for rapid adaptation to mission requirements.

· Integrated Belt Systems – Built for mobility, load distribution, and mission endurance.

GBRS Group products are deployed across every service branch and operational theater, with a proven track record supporting special operations, conventional forces, and federal tactical teams. Our logistics capability ensures rapid, global fulfillment — from CONUS units to forward-deployed elements.

EOFY Procurement Support:
Our procurement team is standing by to assist Contracting Officers, Supply NCOs, and Logistics Specialists in executing final-quarter purchases. Quotes, and compliance documentation are available upon request.

Contact:
GBRS Group Government & Agency Sales
govt-sales@gbrsgroup.com

www.gbrsgroup.com

Posted in Load Carrying, Press Release, Weapon Accessories | Comments Off on GBRS Group Ready to Support DOD & Federal Law Enforcement with End-Of-Year Procurement

Mission First Tactical 7.62×51/.308 20 rd Translucent EXD Magazines

Friday, August 15th, 2025

Horsham, PA – (August 11th, 2025) – Mission First Tactical (MFT), proudly introduces the new MFT 7.62×51/.308 20 rd. Translucent EXD Magazines. These new magazines are the toughest, most reliable translucent magazines available on the market today. Designed to perform in the harshest conditions, these magazines meet the highest demands and are currently deployed with Federal Law Enforcement Agencies.

Crafted from a military-grade proprietary copolymer, these are not your traditional Poly Carb Mags. They are designed for the AR10A/SR25/M110 pattern rifles and optimized for use with SAAMI-spec 7.62×51/.308 Winchester ammunition. The MFT Translucent EXD Magazines are made to resistant to heat, cold, UV, harsh chemicals, and drop impact, even in extreme temperatures. The magazines will not crack, become brittle or discolor over time. No lip reinforcement is required. The translucent body, offered in Clear and Smoke colors, allows for quick visual confirmation of ammo count and type, and has a textured finish to reduce shine. Compatible with a wide range of AR15/M4 and non-AR15/M4 platforms in 7.62×51/.308 caliber.

Features include:

Next generation long glass fiber polymer
Enhanced strength & durability
Ribbed front and rear gripping surface
Tool-less disassembly with double floor plate safety release tabs.
Long-life stainless-steel spring with four-way anti-tilt self-lubricating follower
Flared floor plate
Oversized bolt catch
Paint pen dot matrix

MSRP: $24.99

To learn more about the MFT 7.62×51/.308 Translucent 20 rd. EXD Magazines, and the complete product lineup from Mission First Tactical, please visit www.missionfirsttactical.com. Stay connected with the latest updates by following MFT on Facebook and Instagram.

Posted in Advertiser, Press Release, Weapon Accessories | Comments Off on Mission First Tactical 7.62×51/.308 20 rd Translucent EXD Magazines

Reptilia Launches The PICKER – Ambidextrous Safety Selector for Precision and Speed

Thursday, August 14th, 2025

HILLSBOROUGH, N.C.- August 14, 2025 – Reptilia® is proud to announce the release of The PICKER, an ambidextrous safety selector engineered for unmatched speed, consistency, and control, no matter which hand is on the rifle.

Designed to deliver a truly mirrored control experience for both left and right handed shooters, The PICKER ensures rapid and intuitive safety manipulation, even under high-pressure conditions. Machined from billet 7075-T6 aluminum and finished with MIL-STD Type III hardcoat anodizing, it offers the durability, precision, and reliability demanded by professionals and serious shooters alike.

Whether run left or right handed, or by shooters who frequently transition between both, The PICKER eliminates compromise, delivering the same confident feel and function from either side.

Key Features:

True Ambidexterity – Identical feel and function from both sides

75° or 90° Configurable Throw – Rapid, consistent engagement without overshooting

Rugged Construction – CNC-machined from billet 7075-T6 aluminum, MIL-STD Type III hardcoat anodized

Universal Compatibility – Fits all MIL-SPEC AR-15 lowers

Multiple Finish Options – Available in FDE, Black, and Clear

Made in the USA – Designed and engineered in North Carolina

The PICKER is available now.

Buy Now

Posted in Advertiser, Press Release, Weapon Accessories | Comments Off on Reptilia Launches The PICKER – Ambidextrous Safety Selector for Precision and Speed