SureFire

Gunfighter Moment – Aaron Barruga

August 18th, 2018

Modern Stress Shoots Are Injury Factories That Confuse Marksmanship Advancement

Two days into what was supposed to be a four day mission, my overwatch element was frantically scurrying down ridge lines to avoid being cutoff by Taliban forces that were coordinating an ambush. The hasty exfil lasted a few hours and at multiple points we sacrificed security for raw speed. During moments such as these, I was thankful for all that dumb Army training that served no other purpose than to teach me how to “embrace the suck.” Countless hours spent training under a rucksack paid dividends on days that demonstrated that sometimes grit is the most powerful weapon.

In training, running with a rucksack is one of the worst things a soldier can do because of the trauma it causes to the knees, shoulders, and lower back. Regardless, this doesn’t excuse a soldier from having to perform such a task in combat. Whether a forced march or carrying combined loads up to 200lbs in Assessment and Selection, a soldier must become accustomed to the discomfort caused by his equipment. However, it is important to differentiate between when a soldier is training to endure suffering, versus when he is perfecting a technical skill. As of late, confusion with whether harder is always better can be observed in contemporary stress shoots.

We need to make stress shoots simple again. What were once straightforward exercises that measured altered performance through an elevated heart rate, have become events that place more emphasis on Crossfiting with a gun than actually improving marksmanship abilities. Worse, the Type A personalities inherent with tactical professionals, combined with the sloppy design of stress shoots create an environment that is ripe for injury.

For example, olympic lifting in full kit is a terrible idea. Although impressive, performing such action unnecessarily exposes a shooter to career stalling bodily damage. The risk isn’t just that adding weight via kit causes an adjustment in form, it’s also that a shooter will attempt to perform an exercise as quickly as possible. Consequently, individuals will sacrifice the quality of their movement or form, so that they can “ugh” their way through to the next exercise to achieve a faster time.

From a marksmanship standpoint, sloppy stress shoots plateau development because a shooter will focus on the wrong aspects of his performance. Satisfaction results from completing a difficult task, not from actually testing skill. Whether flipping tires, carrying kettle bells, or running through an obstacle course, a tactical professional will inherently focus on and reward himself for accomplishing the anaerobic qualities of a stress shoot rather than assess how the event improved his marksmanship.

However, poor stress shoot design within training culture does not excuse tactical professionals from learning how to shoot with an elevated heart rate. Moreover, anaerobic activities such as flipping tires and heaving sandbags can be useful, so long as cadre differentiate between diminishing returns and skills progression. In order to be executed properly, stress shoots must be programmed through one of two methods.

The Sustainment Stress Shoot teaches the effects of shooting with an elevated heart rate through short bursts of aerobic or anaerobic activity. This can be accomplished through sprints or carrying weights, however, the physical exercise should never overshadow the marksmanship points of performance. Sustainment Stress Shoots are also shorter in duration to prevent the effects of diminishing returns and the unintended solidifying of sloppy technique.

Sustainment Stress Shoots should not just blindly throw shooters into an exercise. If the event requires the shooter to run, cadre must assess the shooter’s sprint mechanics and weapons handling efficiency. This is more than just cataloging the speed at which the shooter moves, and demands cadre observe explosive acceleration and deceleration sprint mechanics, muzzle orientation, and efficiency with prepping the weapon as a shooter prepares to fire. Similarly, if a shooter must carry weights the cadre should assess the shooter’s ability to rapidly stow and unstow a weapon for travel.

Although not primary to skills development, cadre must remain mindful with enforcing that weapons should be carried or stowed in a manner applicable to a combat environment. Crossfiting with a carbine has led lazy carrying positions in which shooters unnecessarily take their firing hands off their pistol grips and away from their safeties and triggers. Although not catastrophic during a stress shoot (because the shooter knows exactly where and when he will use his weapon) we’ve seen these techniques filter into tactical training events in which shooters are delayed with employing their weapons towards unexpected close quarter targets or in force on force scenarios. If, however, a shooter must move his firing hand away from his trigger and safety, it should because a physical task (e.g. casualty carry, climbing, jumping, etc.) allows for no other options.

Sustainment Stress Shoots also demand that cadre be engaged the entire time. They must be able to catalogue a shooter’s performance flaws and not simply state that a shooter missed because of fatigue.

Below is Throttle Control. It is designed as a Sustainment Stress Shoot that assesses sprint mechanics and marksmanship with an elevated heart rate.

throttel control

The second type of stress shoot is the Resiliency Stress Shoot. These events are meant to be smokers and reinforce just that, resiliency. However, their purpose is still to test skill, and not just reward a shooter for accomplishing something difficult. Because the Resiliency Stress Shoot will place a higher premium on aerobic and anaerobic tasks than marksmanship skill, they should only be performed after Sustainment Stress Shoots are executed as diagnostics. This ensures that a shooter is still learning, and not just running in place—physically and metaphorically—with regards to performance.

Collecting performance data during Resiliency Stress Shoots is more difficult because of the switch in exercises. For example, did Shooter X finish before Shooter Y because he climbed ropes quicker, or because he flipped tires the fastest? Ambiguity such as this is removed through strict penalties for marksmanship failure. This helps to level out the ranking system so that the worst shooter cannot win because he is in the best physical shape. An example of such design is adding a devastating time penalty (e.g. +10 seconds) for first round misses. This accountability encourages shooters to go for speed with sprints or kettle bell carries without allowing for sloppy marksmanship.

course

Resiliency Stress Shoots should always reinforce that grit, determination and heart are more important than any piece of equipment. The hardest thing to teach a tactical shooter is that he, not his gear, is more important than any piece of performance junk the tactical industry—and its Instagram influencers—will attempt to sell him.

Resiliency Stress Shoots should only be performed after multiple Sustainment Stress Shoots are executed as a diagnostic. Failure to do so ensures that a shooter will plateau with regards to performance because the purpose of the event lacks clarity. This results in a shooter assuming that because he accomplishes something hard that his skill is increasing. Although his skill might improve, it is likely in areas associated with weight lifting instead of marksmanship.

If possible, Resiliency Stress Shoot exercises should also attempt to replicate real world obstacles that the shooter can expect to navigate such as urban climbing, carrying a casualty, or breaching a door.

In summary, this article critiques sloppy stress shoot design and its effects on marksmanship progression. However, it is not intended to pardon tactical professionals from learning to shoot in full kit and with an elevated heart rate. Instead, it demands that we perform such actions through more purposeful methods. This can require shooters to actually perform entire training sessions absent of kit and with just their weapons. Furthermore, tactical professionals are also not excused from performing tasks in which the only learning objective is endured suffering. We simply need to be smarter about an event’s goals, and whether we’re unnecessarily risking injury and performance plateau.

footer image

Aaron Barruga is Special Forces veteran with deployments to Iraq, Afghanistan, and the Pacific Theater of Operations. He has trained foreign commandos, police officers, and militia fighters. He is the founder at Guerrilla Approach LLC, where he consults law enforcement officers on counter-terrorism and vehicle tactics.

www.guerrillaapproach.com

www.facebook.com/guerrillaapproach

www.instagram.com/guerrilla_approach

You Never Know Where They’ll Show Up

August 18th, 2018

Blac Rac Rally On The Rocks

August 17th, 2018

www.blac-rac.com

Uinta Trading Co Is Calling All Brands And Affiliates To The Marketplace

August 17th, 2018

For Immediate Release – Salt Lake City – Online marketplace for the outdoorsman, Uinta Trading Co is calling for brands, craftsman, and individuals looking to sell their products to other freedom loving Americans. In conjunction with seller outreach, Uinta Trading is also looking to create partnerships with Affiliates that are established content creators within the outdoor space.

Uinta Trading Co is a veteran owned company that is focused on maintaining a simple and reliable place to buy and sell products that are relevant to quality minded outdoor enthusiasts. The marketplace is a platform where brands can sell any federally legal product without fear of being shut down or adversely affected by arbitrary rule changes or shifts in the political landscape.

Sellers on Uinta Trading Co have no enrollment fees, no monthly fees, and a flat 10% referral fee for orders generate on the marketplace. As a brand integrates into the marketplace, they manage their product pages and will have the option to fulfill their own orders or they can choose to have Uinta Trading inventory and fulfilled orders for them.

Sellers on Uinta Trading are part of a collaborative atmosphere of content creation, joint promotions, lead generation, and a powerful affiliate network.

Sellers can learn more and apply here: uinta.io/selling

TSSI To Hold Customer Appreciation Day

August 17th, 2018

Harrisonburg, Virginia – August 14, 2018 – TSSi will host a one-day Customer Appreciation Day and Tactical Training Conference on Thursday, October 4, at the TSSi headquarters in Harrisonburg. This event will be held prior to the Harrisonburg Police Department SWAT Competition, which will be held on Friday, October 5. Proceeds from sponsorship of this event will go directly to the Harrisonburg Police Foundation, a community-based, all volunteer 501 (c) (3) organization.

The Customer Appreciation Day and Tactical Training Conference, hosted by TSSi at 3900 Early Road in Harrisonburg, will include training sessions, demos from industry vendors, and current operational briefings given by guest speakers. A dinner and HPD SWAT Competition opening ceremonies will be held at the conclusion of the day for sponsors and competition participating organizations.

Participation in the Customer Appreciation Day and Tactical Training Conference is open to members of Law Enforcement, Military, Fire, Emergency Services, and DoD/Federal communities, in addition to invited guests and HPD SWAT Competition participants. Identification will be required for operational briefings and training events.

More information, including information about preregisteration and a schedule of events, may be found at www.tssi-ops.com/customer-appreciation-day

TSSi is a Service-Disabled Veteran-Owned Small Business that has been providing specialized operational equipment and logistics support around the world since 1980. Our mission is to provide mission-focused, time-sensitive, value-added equipment and logistics services solutions, delivered with uncompromising integrity – anytime, anywhere.

CMC Triggers Launches its 9mm Pistol Caliber Carbine (PCC) Single Stage Trigger

August 17th, 2018

Fort Worth, Texas: Due to the rise in popularity of Pistol Caliber Carbine (PCC) rifles and after careful research and development, CMC Triggers has launched their own PCC Trigger. The CMC AR-15 / AR-10 9mm PCC Single Stage Drop-in Trigger, available in both Classic Curved Bow and CMC’s patented Signature Flat Bow, was designed with the highest caliber that one comes to expect from CMC Triggers.

9E666A6A-EA65-4F32-9818-3ADE93332F0C

The same CMC Trigger that has become respected for use in AR-15 and AR-10 style rifles can now be easily installed in PCC rifles. Previously, PCC rifles with a standard trigger installed had approximately a 50% trigger reset failure rate. CMC’s new PCC Trigger geometry design has overcome those earlier issues. The PCC Trigger’s hammer dimensions have been modified to facilitate the 9mm platform and ensure reliability with each pull of the trigger.

The CMC Curved Trigger bow has an exceptionally smooth feel and ultra-clean break while the CMC Flat Trigger Bow renders a linear feel unsurpassed by any other trigger bow shape.

-CMC AR-15 / AR-10 9mm PCC Single Stage Drop-in Trigger Features:
-Single Stage Match Trigger
-Ultra-crisp 3.5lb trigger pull with no creep prior to hammer release
-Glass-smooth break with no feel of grittiness
-Minimal lock time is designed into the assembly using controlled hammer weight and
balance activated by a rocket wire hammer spring, assuring repeatable function with
either commercial or military grade ammunition
-Positive trigger reset allows a quick follow up shot on target
-Trigger pull is factory pre-set and not user adjustable
-Hand assembled, and hand tested
-Totally self-contained one-piece assembly
-Includes CMC Anti-Walk Pin Set
-Fits MIL-SPEC AR-15 and AR-10 style rifles
-Made from 8620 Alloy Steel and S7 Tool Steel with machined tolerances of +/– .001″
-Trigger is easy to install following the instructions:
www.cmctriggers.com/installation-instructions

While PCC shooting has been around for a while, it has recently become popular for competition shooting. USPSA now allows the PCC to be used in matches. Carbines are easier to shoot fast, and easier to shoot accurately compared to handguns. Many 3-Gun shooters have also found that shooting USPSA with a PCC is a good way to get rifle practice for 3-Gun.

7025DD12-718D-47E5-89C0-A0398EF9C382

CMC Triggers is the original maker and manufacturer of the Drop-in Trigger Group for the AR-15/10 rifle since 2003. CMC’s critical sear engagement surfaces have a propriety machining process that renders superior surface finish and dimensional control. As compared to their competition, the techniques used establish a 1-2 RMS surface finish as opposed to EDMing which leaves a pitty 32 RMS, compared to a mirror which is 0 RMS. CMC Triggers sear engagement overlap is six to eight times greater than their competitors. This provides a much safer trigger and enhances reliability.

All CMC products come with a Lifetime Warranty and are made in the U.S.A., CMC proudly designs all its products for Law Enforcement, Military and Civilian use.

For more information about CMC Triggers and all the products we offer please visit us at www.cmctriggers.com.

2018 Special Operations Forces Warrior Industry Collaboration & JSOC Capabilities and Technology Expo Solutions Event

August 17th, 2018

The Program Executive Office Special Operations Forces Warrior (PEO-SW) and Joint Special Operations Command (JSOC) will be holding “Industry Collaboration Days” on 24-25 October 2018. The purpose of this event is to provide industry with an opportunity for a focused engagement with members of PEO-SW and JSOC to share ideas that facilitate the delivery of innovative capabilities to Special Operations Forces (SOF).

SOFWIC will be held on Wednesday, October 24th, 2018 at the Tampa Marriott Westshore and the JCTE Solutions Event will be held on Thursday, October 25th, 2018 at Building 501E, MacDill AFB, FL 33621.

SOCOM is interested for a variety of technologies supplied by SSD readers. There won’t be a test, but you should expect to see formal requirements generated for many of these items.

In order of priority by commodity area:

(1) Ground Mobility
a. Drivetrain and Locking Differentials Ground Mobility Vehicle (GMV 1.1) – Technology that will allow for transaxle replacement to increase reliability.
b. Suspension/Shock technology (GMV 1.1/LTATV/GMV 1.0)
(i) Vehicle – Suspension system related upgrades/replacement to increase performance, durability, and reliability.
(ii) Occupant – Vehicle occupant technology that improves the isolation between the input from the terrain and the corresponding input to an occupant.
c. Lifecycle Cost Reduction Light Tactical All Terrain Vehicle (LTATV), Non-Standard Commercial Vehicle (NSCV), Ground Mobility Vehicle (GMV 1.0 and GMV 1.1) – Novel approaches to reduce the lifecycle costs (namely production and sustainment) associated with braking, suspension, and other vehicular systems. Current C4ISR components (antennas, mounts, cables, etc.) are expensive and long lead in nature. The Government is targeting reduced costs, improved lead times, and equivalent capability to our current SOF suite of C4ISR (LoS, SATCOM, ECMS).
d. 360 Degree Situational Awareness MRAP-All Terrain Vehicle (M-ATV) – Armored vehicles provide protection, but at the expense of situational awareness around the vehicle. Seeking an affordable, durable, and efficient solution to enable all occupants in the vehicle to have visibility around the vehicle.
e. Payload Enhancement (GMV 1.1/LTATV) – solutions that enable the vehicle to carry more payload without significantly degrading performance.
f. Tow Bars (GMV 1.1, GMV 1.0, M-ATV) – Low Cost, lightweight, rapidly attached/utilized, rugged, durable tow bars for use on the medium and heavy family of vehicles (10k-40k lbs).
g. Battery Technology (NSCV, GMV 1.1) – Mature 12 Volt battery technology for cold temp start and/or reduced size without degrading Cold Cranking Amperage or AMP hours. Mature battery technologies that can withstand cold start scenarios down to -50 F and also extend the timeline for silent watch. Reducing size, but not performance, is ideal as well. Certified for flight is required.
h. Purpose Built NSCVs (Modular Purpose Built Chassis or common purpose built drivetrain for SUVs and Trucks) – Cost effective solutions for reduced logistics or to allow vehicles that are commercial in appearance to be reset at the end of the lifecycle instead of disposed of and re-procured. This would also allow different bodies to be interchanged on a common chassis to reduce logistical costs. The concept of Purpose Built is governed by the fact that vehicles are not modified commercial vehicles, but rather purpose built vehicles with little to no reliance on commercial vehicles. Vehicles are anticipated to be designed to mimic late model vehicles typically found in central Asia (e.g., Toyota Hilux, Toyota Land Cruiser 200, and Toyota Surf); armored against ballistic threats; 10 year vehicle life (minimum); vehicle designed for one or more resets; 4 wheel drive with heavy duty brakes and suspension to accommodate gross vehicle weight; full skid plates and running boards; diesel engines; and left hand drive.
i. Enhanced Tire Technology, including both airless and other non-pneumatic solutions (GMV 1.1, LTATV) – Novel approaches addressing wheel/tire assemblies to allow for better suitability in soft soils and other asymmetrical or unconventional warfare environments. Tire technologies to allow for a broader range of environmental terrains (sand, mud, and rock), to include non-pneumatic types.
j. Light Vehicle Safety Improvements and Accessories (LTATV) – Improvements to general safety items to include (but not limited to): seating, roll cages, stability control, driver assist functions, etc.
k. Lightweight Armor (NSCV, GMV 1.1) – Novel lightweight and cost effective technologies that can replace current heavy transparent and opaque armor solutions on vehicle platforms. Heavy armor drives adverse mobility, reduced vehicle durability, and increases in related support component costs.
l. Low Cost, High Output Alternators for NSCVs – Targeting both 12V and 28V dual alternator combinations, along with high output single 12V and dual 12V solutions. The 28VDC alternator shall have a minimum of 130A (at 28VDC) output (80A at idle) and shall fit within the current engine compartment. Any single high-output alternator shall have a minimum 260 Amp (12 Volt DC) output rating at idle and engine operating temperature of 220 degrees F. The purpose of this Request for Information (RFI) is to determine the availability of solutions to replace the existing package within NSCVs, allowing flexibility for future growth, and to clear real estate in the engine compartment if we can achieve our requirements with a lower cost and smaller solution.
m. Driver Cognitive Workload Reduction (LTATV/GMV 1.1) – means of reducing driver cognitive workload in lone driving, or convoy driving situations up to and including solutions that eliminate the need for a driver altogether.

(2) Visual Augmentation Systems (VAS):
a. Signature Reduction technologies for Targeting Laser (Out of Band and Notional Laser) – Laser designation technologies that are able to be perceived through typical and widely fielded Image Intensification technologies. Notional laser could exist only in virtual reality and be perceived through an integrated augmented reality display inside an eyepiece of Night Vision Goggles (NVG).
b. Head-mounted Devices- Looking for weight saving technologies or novel methods to move weight off of the head.
c. Hand Held Devices- Seeking size, weight, and power enhancements on handheld VAS commodities.
d. Weapon Mounted Devices Seeking size, weight, and power enhancements on weapon mounted VAS commodities.
e. Power management, virtual reality (portable).

(3) Ammunition and Weapon Systems (A&W):
a. Signature reduction for Small Arms- Sound, Flash, and Thermal.
b. Machine Gun Suppressor capable of surviving high volume/rate of fire.
c. Intermediate Caliber (.338NM) – Long Range Machine Gun 2000m to include new tripod, long range- ruggedized optics, and polymer ammunition.
e. 6.5mm Sniper Support Rifle.
f. 6.5mm Assault Machine Gun.
g. Suppressor for MK27 Gen 4.
h. Thermal Beacon Technologies (Mid Wave Thermal Spectrum) range >10NM.
i. Precision Variable powered optics capable of acquiring targets at 50-1500m and beyond.
j. Precision Aiming laser with built in range finding (up to 2000m), ballistics, and environmental sensing capable of blue tooth and Near field communications.
i. Organic Strike Assets capable of providing precision fires on ranged targets (1k-50k).

(4) Soldier Protection, Survival, and Equipment Systems (SSES):
a. Armor – Novel technologies and designs that decrease weight while increasing level of protection.
b. Lightweight Rifle Protection Ballistic Helmet – Current lightweight ballistic helmets are limited to 9mm and fragmentation protection due to the weight required to achieve rifle protection. Seeking lightweight ballistic helmet that defeats the 7.62x39mm MSC projectile at muzzle velocity.
c. Special Operations Eye Protection – Laser protection (visible and IR); ability for a single lens to adapt to various lighting conditions near instantaneously.
d. Extremity Protection for Extreme High Altitude – Airborne operations are conducted at extreme high altitudes with air temps below -40 C. These temps can lead to vasoconstriction in the extremities. Seeking active heating capabilities to reduce likelihood of vasoconstriction and maintain dexterity during these airborne operations and throughout all phases of the mission.
e. Logistics – FIAR compliant internet accessible web application (certified mixed/feeder system) for the Special Operations Forces Personal Equipment Advanced Requirements (SPEAR) program capable of property accountability, warehouse management, logistics/supply functions, financial, and personnel management data to include the conversion of measurements to sizes using an approved algorithm for Special Operations Forces-Peculiar (SO-P) individual equipment. Integration with the United States Special Operations Command (USSOCOM) logistics enterprise is mandatory.

(5) Tactical Combat Casualty Care Medical Systems (TCCC):
a. Novel FDA approved technologies that apply to individual casualty care and casualty evacuation.
b. Active Cooling and Heating Whole Blood Storage Container – As SOF medics transition from crystalloid and colloid to whole blood for traumatic hemorrhagic resuscitation they are facing major logistical challenges due to the limited temperature range for storing and transporting whole blood far forward on the battlefield. Seeking portable active cooling and heating storage container capable of holding 1-2 units of blood within the FDA regulation temperature range for 4-5 days. The light weight container should be small enough to fit inside of or attached to the current USSOCOM Medic Aid Bag and be powered by standard commercial batteries commonly found in a deployed environment.
c. Handheld Battlefield Ultrasound – SOF medics have a requirement for a handheld ultrasound device capable of use in a battlefield environment. Due to the space and weight limitations within the Special Operations medical aid bag, the battlefield ultrasound should be limited to a single universal transducer which can be used for a range applications. The single universal transducer must be durable enough for the battlefield environment and able to function on the Android operating system.

(6) Electronic Counter Measures (ECM):
a. Increased battery power density providing the same equipment operating life at a size/weight reduction of up to 50%.
b. High performance multi-band antennas that can be used for electronic countermeasures systems, communications systems, and other functions while reducing SWAP on platforms/operators.

(7) Counter – Unmanned Aerial Systems (C-UAS):
a. Passive radar – radar detection that operates in a passive/promiscuous mode rather than active emitting. Ability for multiple/simultaneous detections.
b. Auto Pilot detection – detection of non-RF telemetry like Pixhawk, Mavlink, etc. autopilot drone modes. Small, lightweight, low power solutions.
c. Detection – detecting drones using LTE cellular technology.
d. Kinetic Defeat – small, lightweight kinetic/hard kill solutions.

(8) Find, Fix, Finish, Exploitation, and Analyze Capabilities (F3EA).

Interested parties must respond by Aug 31, 2018 5:00 pm Eastern. Visit www.fbo.gov for full details.

FirstSpear Friday Focus – XL Mesh Bag NSNS

August 17th, 2018

Introducing the XL Mesh Bag now available while supplies last in the Non-Standard Non-Stocking section of the FS web store. This mesh duffel is extra long at approximately 48x14x10 and was originally built for a US government agency when FirstSpear had just opened its doors. Only available in black with limited quantities grab one of these today before they are gone! No back orders will be filled.

www.first-spear.com/non-stocking-non-standard/extra-large-mesh-bag