Soldier Systems Daily Soldier Systems Daily

Crye Precision – Three New Products

May 7th, 2015

Crye Precision has launched three new products which are now available on their webpage: the JPC 2.0, Loft Jacket, and LWF Jacket.

JPC 2.0

The latest iteration of Crye’s Jumpable Plate Carrier, the JPC 2.0 is a lightweight and minimal armor vest designed to maximize mobility and packability, while reducing as much weight as possible. The unloaded carrier weighs just over 1 lbs., and is highly configurable. The JPC 2.0 features the Skeletal Cummerbund system with Crye’s Integrated Attachment System which allows for pouches to be mounted to both the inside and outside of the cummerbund. Additionally, the JPC 2.0 is compatible with all AVS Detachable Flap systems.

Features

Easy 2-step emergency doffing capability

Hidden vertical webbing loops on front carrier supports detachable chest rigs

High performance stretch material that allows for plates of varying thickness VELCRO® brand panel on the front of the carrier allows detachable MOLLE or mag pouch front flap

Zippers along the sides of the back carrier for zip-on panels

Low-profile cummerbund attachment that provides maximum adjustability and allows for chest expansion as needed

Webbing loops on the back of the shoulder straps to support back panels

Drag handle that supports up to 400 lbs.

Colors: Black, Coyote, MultiCam, Ranger Green

cryeprecision.com/ProductDetail/blc06602lg0_jpc-20

Loft Jacket

The Loft Jacket is a midweight jacket that functions equally well as an outer garment and an insulation layer. The outer layer is treated with Nano STX which sheds moisture and snow. The Loft Jacket features an athletic fit for use under shells, so those looking for a looser fit should order one size up.

Features

Helmet-sized single layer hood stows in collar

Stretch cuffs with integrated thumb loops

Jacket stows into built-in pocket forming a handy pillow

Two exterior zip pockets and three large interior zip pockets

Breathable stretch fleece side panels

Tailored for extreme mobility without binding

Nano STX™ treatment sheds rain and snow

ClimaShield® insulation for extreme performance and packability

Colors: Black, MultiCam, Ranger Green

cryeprecision.com/ProductDetail/aprjl102lg0_loft-jacket

LWF Jacket

The LWF Jacket is a lightweight jacket that functions equally well as a standalone jacket or as breathable insulation under a shell. Made from a single layer of custom fllece fabric, it features a “slick” outer surface which sheds water and dirt better than typical fleece. The LWF Jacket features an athletic fit for layering, so those looking for a looser fit should order one size up.

Features

Zip closure hand pockets

Interior chest pocket

Integrated thumb loop

Hem draw cord

Breathable mid-weight stretch fleece material

Tailored for extreme mobility without binding

Colors: Black, MultiCam

cryeprecision.com/ProductDetail/aprjf102lg0_lwf-jacket

Tags: Crye Precision
Posted in Armor, Clothing | 22 Comments »

OP Tactical – Arabic N PVC Patch

May 7th, 2015

OP Tactical is now offering this Arabic ‘N’ patch. 3 inches, PVC, with hook tape backing.

www.optactical.com/optarnpvcpa

Tags: OP Tactical
Posted in Morale | 16 Comments »

OWLTAC A1T ENDURE Flashlight On Kickstarter

May 6th, 2015

OWLTAC is a flashlight company that has started a Kickstarter campaign for what they claim is the first dual independent, selective battery powered flashlight, the A1T Endure. The A1T features an aircraft grade 6061-T6 aluminum body with type III hard anodizing, concealed o-rings, a belt clip, and lanyard holes. It is IPX5 certified, and drop rated to 1m.

The most unique feature of the A1T is its dual-battery operation. Powered by two CR123A batteries, the A1T only draws from one battery at a time, allowing the user to switch to the second battery when needed via a toggle switch; this feature has been compared to an independent backup battery on an aircraft system The A1T outputs 200 lumens for 1 hour on a single CR123A on the max setting, and 16 hours on the 20 lumens low setting; the above image represents the run time with two batteries.

www.kickstarter.com/projects/451008586/owltac-a1t-endure-flashlight-with-selective-batter

Tags: Kickstarter, OWLTAC
Posted in Lights | 13 Comments »

C&H Precision Weapons Introduces New Javelin Action

May 6th, 2015

C&H Precision Weapons has announced their new Javelin Action. Javelin is a precision bolt action with a standard Remington 700 footprint, allowing for ease of stock selection and off-the-shelf custom fit. It features an M-16 style extractor, spiral cut bolt flutes, and a side bolt release.

Included with Javelin is a 20 MOA MilSpec 1913 accessory rail, pinned and secured with 8-40 screws, and a pinned precision ground recoil lug.

Javelin Actions are manufactured with pre-hardened chromium 416R stainless steel. They are available in Short, Medium, XM, Long, and XL lengths, to accommodate all popular factory chambering and extended length hand loads.

Available now at www.chpws.com

Tags: C&H Precision Weapons
Posted in weapons | Comments Off on C&H Precision Weapons Introduces New Javelin Action

Looking Forward To This Osprey Title on Marine Recon Gear

May 6th, 2015

Coming November, 2015, US Marine Corps Recon and Special Operations Uniforms & Equipment 2000-15 (Elite) by J. Kenneth Eward, professor at the American Military University. you may remember his other, great Osprey book on Marine Infantry equipment.

Eward does excellent research and has spoken at length with the men who developed this equipment.

Tags: J Kenneth Eward, osprey
Posted in Media | 6 Comments »

Daniel Defense – Guns & Gear Sweepstakes

May 6th, 2015

Daniel Defense Launches Guns & Gear Sweepstakes

Black Creek, GA- May 4, 2015- Daniel Defense announced today it will give away a Guns & Gear Prize Package valued over $3400 to one lucky grand prize winner. The second annual “Guns & Gear Sweepstakes” is open for entries today, 5/4/2015 at 5 p.m. Eastern Time. Gun enthusiasts can enter to win a Daniel Defense DDM4v11 PRO rifle, Leupold VX-6 Rifle Scope, Surefire P2X Fury with Daniel Defense KeyMod Offset Flashlight Mount, and Oakley Tombstone Eyewear. Entries will be accepted through 11:59 p.m. Eastern Time on 6/8/2015 at www.gunsandgearsweepstakes.com.

“We’re excited to give consumers the opportunity to win this prize package,” said Executive Vice President and VP of Marketing, Cindy Daniel. The ‘Guns & Gear Sweepstakes’ is a great opportunity to introduce our new V11 PRO to fans as well as those that might otherwise not be familiar with this or our other firearms.”

The V11 PRO Series rifle from Daniel Defense includes many of the features 3-Gun competitors look for in a competition rifle: 18-inch barrel with rifle length gas system, 15-inch SLiM Rail with KeyMod attachment system, Geissele Super Dynamic 3-Gun (SD-3G) Trigger and BCM Gunfighter MOD 4 Charging Handle.

NO PURCHASE NECESSARY TO ENTER OR WIN. Must be 21 or over and a U.S. Citizen. To enter, visit www.gunsandgearsweepstakes.com between 5 p.m. EST on 5/4/15 and 11:59 p.m. EST on 6/8/15. Void where prohibited by law. For complete details, entry limits, and Official Rules, visit www.gunsandgearsweepstakes.com.

Tags: Daniel Defense
Posted in Contest | 1 Comment »

Bianchi Concealment Holsters Are Now Available For The Glock 43

May 6th, 2015

Bianchi Concealment Holsters Available for Glock 43

Carry Your Glock 43 Inside the Waist or on the Ankle

ONTARIO, California – Bianchi® announced today the addition of three concealment holster fits for the new Glock 43 handgun. Popular models such as the 100 Professional™, the 100T Professional™ Tuckable and the time-proven 4750 Triad™ are now available to order.

For comfortable deep concealment, Bianchi offers two inside the waistband (IWB) carry holsters for the Glock 43 – the Model 100 Professional™ and the Model 100T Professional™ Tuckable. Both models are constructed of premium high-grade, full grain leather with a suede-lined exterior to provide a non-slip material against the body. The high-cut rear of the holster rides comfortably against the torso and eliminates discomfort associated with sharp-edges. The Model 100T includes a patent-pending C-clip design that has an adjustable cant for a customized draw and allows a shirt to be tucked in as needed.

For ankle carry of Glock 43, Bianchi’s Model 4750 Triad Ankle Holster is a great option. The Triad ankle holster has three unique features – an Achilles arch that keeps the holster in position, a detachable ankle pad for maximum comfort and a compression strap design that pulls the butt of the gun into the calf to keep the firearm securely against the leg.

All models are available now and are now available online at www.safariland.com/our-brands/bianchi.

Tags: Bianchi
Posted in Holsters | Comments Off on Bianchi Concealment Holsters Are Now Available For The Glock 43

Robots To Drive Polaris RANGER At DARPA Robotics Challenge

May 6th, 2015

Polaris Industries has announced that their DARPA Polaris RANGER XP 900 EPS and GEM electric vehicles will be featured at the DARPA Robotics Challenge Finals.

The DARPA Robotics Challenge was created to spur development of robotic tech that can help humans better respond to dangerous conditions and disasters. The Challenge Finals will have robots performing multiple tasks in a continuous course, which will be a simulation of obstacles and challenges that might be encountered in a real disaster situaion. During the Finals, the driving task will require participating robots to drive the RANGER XP 900 EPS on a roadway and weave around obstacles. It will also have to egress the vehicle and attempt to intervene in a mockup disaster site which is too dangerous for humans to perform tasks.

“We are excited to continue our relationship with DARPA after the successful DRC Trials in 2013,” said Rich Haddad, general manager of Polaris Defense. “Off-road vehicles are some of the most useful vehicles in disaster relief, and our specialized RANGER vehicles were built to accommodate the robots and provide mobility for the driving task. In the future, the versatility of the RANGER platform would allow a robot to transport tools, equipment, supplies and power around a disaster site, while traversing the difficult terrain often found in disaster situations.”

The DARPA RANGER XP 900 EPS was specially customized for the event, featuring a remote SafeStop electronic throttle kill, brake actuation tehcnology, and a 1000lb capacity bed for the robot’s power supply. The cab features a bench seat, and tilt steering for ample room for robots to operate the vehicle. The vehicles also have TERRAINARMOR airless tires for maneuvering in diverse terrains without the risk of a flat tire.

In addition to the RANGER XP 900 EPS, Polaris GEM vehicles will also be in use at the Finals. They will be used to transport the robots after completion of their tasks, as well as working as VIP shuttles, and transporting goods and people throughout the campus.

The DARPA Robotics Challenge Finals will be held on June 5-6, at the Fairplex in Pomona, California.

www.polaris.com/en-us/home

Tags: DARPA, Polaris Industries
Posted in Robotics | 13 Comments »