For the past couple of years, SIG has held two range days prior to SHOT Show. Additionally, they invite in several other companies, to display their wares to government customers, key accounts and select media.
Archive for the ‘Advertiser’ Category
SIG SAUER Range Day 2019
Sunday, January 20th, 2019SOTECH Displays Auto X Ops Stock At SHOT Show
Sunday, January 20th, 2019
The Auto X Ops self-actuating carbine stock is not being offered commercially after a year of development with military and law enforcement units and programs. The spring loaded stock is activated by a lever below the trigger guard giving advantages in confined movement/vehicle egress and basic marksmanship training. Check it out in the SOTECH booth 20113 at SHOT Show.
SOTECH will also be debuting new additions to their special operations medical line and next gen gun belt line. They will also display new accessories the new Taser 7 system.
SCUBAPRO Sunday X-TEK BCD Line
Sunday, January 20th, 2019 
X-FORCE is more than a powerhouse of features, making it perfect for passionate and advance recreational divers. New, pre-formed wrap-around bladder provides higher buoyancy with increased volume in the lower back. New quick-release weight buckle retaining system allows one-hand operation and easy to find for optimal safety.
• Additional back pockets offer trim counterweight storage.
• The backpack and soft neck protection are fitted with Air-Net padding for increased comfort and protection.
• Shoulder pads and straps covered in anti-slip material.
• It is constructed of high-resistance Cordura 500 exterior and Nylon 420 interior, guaranteeing durability.
• Cordura® Lock protects against the elements.
• Octopus holder on both sides keeps gear neat and accessible.
• Available with Balanced Power Inflator (BPI) or optional AIR2.
The SCUBAPRO X-Force BCD is a robust BCD with a pre-formed wrap-around bladder which provides a better fit and excellent comfort. The X-Force has some fantastic features such as a high buoyancy via a new gusset in the lower area of the air cell, a new backpack with air net padding and air net soft protection for the neck.
Secure Quick Release integrated weights use a pinch-clip to hold your weights in position. Trim weight pockets on the rear hold any trim weight either side of your cylinder for a better position in the water. Each side pocket has an octo holder and a D-Ring to hold your alternate air source with either a clip or tucking the hose.
Anti-Slip Shoulder Material holds the BCD in position even when wet so the BCD won’t move or twist. The outside of the BCD is made from high-resistance 500D Cordura for durability, and 420 Nylon interior further increases durability.
The Scubapro X-Black is a high specification, durable yet comfortable BCD that features a new Balanced Power Inflator (BPI) and elbow design, rigid backed integrated weight pockets, redesigned dump valves and a new bladder system. The X-Black features the exclusive AirFlex system, highlighted by the red bungees, that simplifies buoyancy control and guarantees high stability. One of our most feature-rich BCs, the X-Black is also one of the most comfortable even when fully inflated thanks to its ergonomic cut.
SCUBAPRO can also manufacture custom X-Teks.
XFtZnZOLNnw
Unity Tactical Announces FAST Optics Mounts
Saturday, January 19th, 2019Unity Tactical is proud to announce FAST optics mounts as the latest addition to our growing product line. FAST optic mounts are designed to facilitate quicker and more intuitive target engagement and is comprised of several different mounts and accessories.
FAST Mounts will be available for all commonly used/issued optics in the military and law enforcement communities and like all Unity Tactical products, they are packed with smart features. FAST mounts are machined from 7075-T6, available in Type 3 black or FDE anodizing and can be configured for multiple mounting options.
FAST Micro Mount
Compatible with most optics that feature the ubiquitous Aimpoint Micro footprint, the Patent Pending FAST Micro Mount elevates the capability of your optic. It securely attaches to Milspec M1913 Picatinny rail via a no-snag dual cross-bolt clamp or optional American Defense Mfg patented QD Auto Lock Lever. Other mounting solutions such as captured ½“ hex nut are available to units on a volume basis. The optical centerline of the mount is a nominal 2.26” above the rail. The increased height of this optic mount works great with NVG’s, gas masks, and heads up shooting techniques while sitting only 1/3” of an inch higher than other popular 1.93” mounts. The mount features built-in, standard 1.42” height, windage-adjustable back up rear iron sight as well as an optional elevation adjustable front sight. The front sight is removable so shooters can utilize the built-in rear sight with a standard front sight for a more traditional sight radius. The FAST Micro Mount eliminates the need for separate rear BUIS, saving weight and space. Weighing in at 3.0 oz, the FAST Micro Mount competes with the lightest optic mount / rear BUIS combos on the market. These are currently in production and will be available late Q1 2019.
MSRP $169
FAST FTC Magnifier Mount
The first ever FTC (Flip-To-Center) magnifier mount is here. Compatible with Aimpoint 3X and some other 30mm tube magnifiers, our Patent Pending FTC Mag Mount swings the optic inboard and down, stowing it almost completely within the receiver’s footprint while not obstructing the sight picture of the red dot optic. This reduces the snag hazard and protects the magnifier. The FAST FTC Mag Mount operates via force-to-overcome, so deployment and stowage is… fast. It weighs 4.5 oz and is compatible with all FAST red-dot mounts. These are currently in production and will be available late Q1 2019.
MSRP $198
FAST Riser Mount
The FAST Riser is a universal solution for EOTech EXPS, Vortex UH-1, Leupold LCO, and other similarly-sized optics. The FAST Riser places the optical centerline at a nominal 2.26” and is fully compatible with the FAST FTC Mag Mount. It attaches to weapons via dual cross bolt clamp and can be augmented with an optional offset flip-up iron sight. FAST Risers are currently in production and will be available late Q1 2019.
MSRP $88
FAST Offset Options
The FAST Offset options will initially include a Rear Iron Sight, Trijicon RMR mount, and Aimpoint Micro footprint mount and will be compatible with the Riser, Scope Mount, and ACOG mounts. Our optional offset rear sight is compatible with most offset front sights. Offset mounts are slated for release late 2019. MSRP TBD
FAST Scope Mount
FAST Scope Mounts are slated to be available late 2019. The testing model shown is a 1.93” height, but may become available in other heights. Designed to achieve a balance of weight and strength, these mounts feature the same offset integration as the riser. MSRP TBD
FAST ACOG Mount
FAST ACOG Mounts will be available late 2019. The test model shown is standard height, but may become available in other heights. These mounts feature the same offset integration as the riser.
MSRP TBD
Please stop by booth 6502 at SHOT SHOW 2019 to test FAST and see our other new products.
Interested dealers should contact us at info@unitytactical.com to get pricing and place pre-orders.
If you are retail customer and interested in these mounts, please visit our website at www.unitytactical.com to sign up for in stock notifications and follow us on social media for more information and release dates.
“All of us here at Unity are extremely excited about this product release as it moves us closer to better accessory integration, especially with FUSION and some other to be announced products. We have a lot planned for 2019.” – Trent Zimmer, President
S&S Precision – Navboard Rotary
Saturday, January 19th, 2019The NavBoard™ Rotary is third and final Nav Board from S&S Precision we are showcasing before SHOT Show.
It allows users to attach a wide range of consumer electronic navigation device’s, with or without a protective case. It can be stowed close to the user’s body, and deployed in an open position and viewed in either a vertical or horizontal configuration. When stowed in vertical position the NavBoard™ Rotary only uses 2 columns and 3 rows of webbing.
• Hands-free navigation
• Flip-down phone panel fits smartphones as large as the Samsung NOTE
Sneak Peek – New Ultra-Lite Split Front Chest Rig from Velocity Systems
Friday, January 18th, 2019
Velocity Systems is releasing the new Ultra-Lite Split Front Chest Rig at SHOT Show. See it in Booth #8411.
Mike Pannone Booth Appearance at SureFire for SHOT 2019
Friday, January 18th, 2019
Fountain Valley, CA—SureFire, LLC will be hosting Mike Pannone of CTT-Solutions at the SureFire booth #13968 during SHOT 2019 on Thursday, January 24, from 11:30 a.m. to 12:30 p.m. Come by to meet Mike and ask any training questions or advice on how to be a badass. SureFire will also be holding a raffle at 12:15 p.m. where winners will receive new SureFire products. Raffle tickets will be given out at the SureFire booth Welcome Desk between 8:30 a.m. and 12:15 p.m. on Thursday.
Magpul Announces iPhone 7/8 & 7+/8+ & SAMSUNG S 9 & S9+ Bump Cases Along With MP5/HK94 Products
Friday, January 18th, 2019This last Magpul announcement before SHOT Show consists of eight products. While the Bump Cases will be available for sale next week, the MP5 accessories are still a ways out.
Phone 7 /8 & 7+/ 8+ Bump Case
The legendary protection Magpul iPhone® Bump Case owners have enjoyed for their other iPhones is now available for the iPhone 7/8 and 7+/8+. A hard, protective outer shell surrounds a shock-absorbing inner layer, forming a double-reinforced protective barrier with a slim profile. Raised, easily-identifiable button covers offer tactile feedback when pressed. Our Bump Case snaps on and off for easy installation/removal, while PMAG®-style side ribs provide additional grip that won’t snag on clothes of pockets. Fits iPhone 7+/8+.
Designed and manufactured in the U.S.A.
Features:
· Compatible with iPhone 7/8 and 7+/8+
· Two-material, rigid-shell construction provides protection against minor bumps and abrasions
· Compact design adds minimal bulk to the phone
· Fully compatible with Retina HD screen
· Textured surface and PMAG®-style ribs for added grip yet allows for snag-free removal from pockets
· Raised lip protects screen when laid face down, yet remains unobtrusive
· Ports, switches and buttons are accessible with case installed (optimized for use with factory charging cable and headphones)
Colors BLK, FDE, ODG
MSRP $26.95
Samsung Galaxy S9 & S9+ Bump Case
The legendary protection Magpul iPhone® Bump Case owners enjoy is now available for the Samsung Galaxy S9. A hard, protective outer shell surrounds a shock-absorbing inner layer, forming a double-reinforced protective barrier with a slim profile. Raised, easily-identifiable button covers offer tactile feedback when pressed. The S9 Bump Case snaps on and off for easy installation/removal, while PMAG® -inspired side ribs provide additional grip that won’t snag on your clothes or pockets. Fits Samsung Galaxy S9.
Designed and manufactured in the U.S.A.
Features:
• Compatible with Samsung Galaxy S9
• Two-material, rigid-shell construction provides protection against minor bumps and abrasions
• Compact design adds minimal bulk to the phone
• Textured surface and PMAG®-style ribs for added grip for snag-free removal from pocket
• Unobtrusive raised lip protects the screen when phone is laid face down
• Charging cable port, headphone jack, and volume switch are accessible with the case installed (optimized for use with factory charging cable and headphones)
Colors Black, FDE, ODG
MSRP $26.95
MAGPUL® SL HAND GUARD – SP89/MP5K
The Magpul SL Hand Guard for the SP89/MP5K is a high-strength, injection-molded polymer handguard solution that provides the user with improved ergonomics, anti-slip texturing, and M-LOK® slots for compatibility with modern accessories. It’s an injection-molded handguard solution for SP89/MP5K and clones that provides increased utility and enhanced control of the firearm. The SL Hand Guard offers M-LOK slots at the 3, 6, and 9 o’clock positions, and features a large muzzle-end hand stop, similar to the HK “K” style handguard.
Features:
• M-LOK slots at 3, 6, and 9 o’clock positions
• Increased firearm utility and control
• High-strength polymer construction provides rigidity and stability without the need for a user-adjusted tensioning mechanism
• Large muzzle-end hand stop similar to the H&K “K” style handguard
• Aesthetics reminiscent of legacy MP5 furniture lines as reimagined by Magpul
• Serves as 922(R)-compliant component for imported SP89/MP5 clones
COMPATIBILITY
MP5/SP89 and clones with 5” barrel
Colors BLK
Price TBD
MAGPUL® SL HAND GUARD – HK94/MP5
The Magpul® SL Hand Guard – HK94/MP5 is an upgraded injection-molded polymer handguard solution for the PSA5/MP5 platform. Featuring improved ergonomics, anti-slip texturing, M-LOK modularity, and an optimally-placed QD sling attachment, the Magpul SL Hand Guard increases utility and offers a feature set currently seen only with metal handguards, yet at a competitive price. Magpul’s design and engineering result in an enhanced user experience unavailable elsewhere, putting a modern yet functional twist on the legacy aesthetics of the MP5.
Features:
· M-LOK slots at 3, 6, and 9 o’clock positions
· Increased firearm utility and control
· High-strength polymer construction provides rigidity and stability without the need for a user-adjusted tensioning mechanism
· Large muzzle-end hand stop similar to H&K “K” style handguard
· Aesthetics reminiscent of legacy MP5 furniture lines as reimagined by Magpul
· Serves as 922(R)-compliant component for imported MP5/SP89 clones
COMPATIBILITY
MP5/SP89 and clones with 8” barrel
Colors BLK
Price TBD
MAGPUL® SL GRIP MODULE – HK94/93/91 & SEMI SHELF HK® CLONES
The Magpul SL Grip Module provides enhanced ergonomics, TSP anti-slip texturing, grip storage, and an optimized grip angle for increased control of the firearm and ease of access to fire control components. Compatible with the HK94, 93®, 91®, and HK® clones equipped with a semi shelf receiver interface. The SL Grip Module is not compatible with swing-down lowers.
Features:
• Enhanced ergonomics allow easier access to fire control components
• Grip features a no-slip texturing as well as storage capability
• H&K-style pictograph selector markings (safe/semi/full-auto)
• Accommodates three-position SSL
• Classic MP5 aesthetics
COMPATIBILITY
MP5 and Reverse Stretch clones, HK91/93/94
Colors BLK
MSRP TBD
MAGPUL® ESK MAGPUL SL GRIP MODULE & HK® POLYMER TRIGGER HOUSINGS
The Magpul ESK (Enhanced Selector Kit) provides the HK94/93®/91® end user with a variety of selector levers, resulting in a modular, ambidextrous selector with enhanced ergonomics. Providing ease of firing hand selector activation and deactivation, Magpul’s human factors driven design and engineering result in an optimal user experience, allowing a modern manual of arms to be employed with these iconic firearms.
• High-strength steel and polymer construction
• Simplified, easy-to-use locking mechanism
• A modern rendition of classic MP5 SSL, with updated aesthetics
• Exceeds usability and performance of HK pattern SSL/ESSL
COMPATIBILITY
Polymer grip modules of HK91/93/94, MP5, and clones
COLORS BLK
MSRP TBD
