Hudson Supplies represents ITW in Canada. They currently have the only stock of FastMag Gen IV for 5.56 and 6.8 SPC in North America.
Distributors/Dealers welcome and they will be at #CANSEC2017 this week.
Archive for the ‘Load Carrying’ Category
TYR Tactical Tuesday – Low Profile Uniform Belts
Tuesday, May 30th, 2017TYR Tactical® introduces a complete line of Low Profile Uniform Belts. The belts are 1.75” wide and constructed with high abrasion resistant 4-way stretch Tweave. They incorporate three different buckle styles, 1” Plastic Buckle, 1” Cobra® Buckle or G-Hook, depending on user preference. These belts were also designed to work with their complete line of Huron™ Uniform Pants.
FEATURES:
• Dim: 1.75” W
• 1” Cobra® Buckle
• Wt. 5.6 oz.
• Sizes: Small – 2XLarge
FEATURES:
• Dim: 1.75” W
• G-Hook
• Wt. 4.0 oz.
• Sizes: Small – 2XLarge
FEATURES:
• Dim: 1.75” W
• 1” Plastic Buckle
• Wt. 3.2 oz.
• Sizes: Small – 2XLarge
Urban Operator – “NEMESIS” Fighter belt
Sunday, May 21st, 2017
Features:
Built with two layers Milspec nylon webbing
Good width to carry heavier loadout
D-Ring extraction ring integrated within the buckle
100% hand made in USA by Veteran
Material:
4088 type 13 Nylon webbing
Mil-Spec 17337 Nylon webbing
Mil-Spec # 69 Nylon bond thread
1’’ inch AustriAlpin Original Cobra Buckle with D-ring
Mil-Spec Velcro
Mayflower Jungle Kit
Friday, May 19th, 2017
We’ve teased it a couple of times during development but it’s now available. The Mayflower Jungle Kit is designed to provide a load carriage solution for the hot, wet jungle environment. The pouches were designed around the amount and type of equipment usually needed for long duration jungle patrolling. All the pouches feature the Helium Whisper attachment system (zero water absorbency) and large diameter drain holes.
All materials and workmanship are 100% made in the USA. I’ve got a set in Coyote and if you’re looking for a belt kit, this is the one to get.
Four (4) kit options featuring different pouch setups:
Kit Option 1: 5.56, General Purpose Jungle Kit
Included: (4) 5.56 Pouches, (2) Canteen (2) GP Pouches (1) Harness and Belt Setup
Kit Option 2: 5.56, BP Jungle Kit
Included: (4) 5.56 Pouches, (2) Canteen (1) Butt Pack (1) Harness and Belt Setup
Kit Option 3: 7.62, General Purpose Jungle Kit
Included: (4) 7.62 Pouches, (2) Canteen (2) GP Pouches (1) Harness and Belt Setup
Kit Option 4: 7.62, BP Jungle Kit
Included: (4) 7.62 Pouches, (2) Canteen (1) Butt Pack (1) Harness and Belt Setup
The Jungle 40mm Chest Pouch Set is also now for sale as an additional accessory.
For more information and photos visit www.velsyst.com/jungle-kit.
*All the pouches listed below will also be for sale individually
Triple Aught Design Introduces Axis Expedition Duffle and Catalyst Field Shirt
Monday, May 15th, 2017During last Friday’s drop, Triple Aught Design introduced two cool new products, the Axis Expedition Duffle and Catalyst Field Shirt
Features:
* Made from Polyant LS42 and X51
* 5 rows of 1” webbing loop pairs along inside floor for panel, cube, and other storage attachments
* Webbing key loop attachment inside mesh pocket on lid
* 1” elastic retainers on shoulder straps to capture loose webbing ends.
* Removable padded shoulder straps/ carry handles accommodate 3 modes of carry: Side Carry, Shoulder strap, & Backpack mode.
* Reinforced grab handles at front and back with tie-down loops
* 3” x 4.5” luggage tag included featuring TAD logo, loop velcro for patches, and concealed business card slot.
* 6 side compression straps (3 per side)
* Made in USA
Volume:
* Small: 50 liters (3432 cu in)
* Medium: 75 liters (5070 cu in)
* Large: 100 liters (6272 cu in)
Dimensions
* Small: 13” W X 24” H X 11” D
* Medium: 15” W X 26” H X 13” D
* Large: 16” W X 28” H X 14” D
Weight:
* Small: 0.9kg (31.84oz)
* Medium: 1.04kg (36.64oz)
* Large: 1.23kg (43.52oz)
* Relaxed Fit
Materials
Shell
* 101 g/m² 100% Nylon Ripstop
* UPF 50
* Moisture Wicking finish
* Made in USA
Insulation
* 51 g/m² Polartec Alpha
* 70% recycled polyester, 30% polyester
* Made in USA
Lining
* 95 g/m² 100% Nylon
* Made in USA
Weight for Medium
* Weight : 0.59kg (20.8oz)
Pocket Configuration
* Two Chest Pockets with Snap Closure
* Two Zippered Hand Pockets
* All Zippers Are YKK® Zippers
Cuff & Sleeve Configuration
* Double-Snap Barrel Cuff
* Single Snap Sleeve Placket
* Reinforced Elbow
Made In USA
Beez Combat Systems PCC (Pistol Caliber Carbine) Chest Rig
Wednesday, May 10th, 2017Many predicted 2017 would be the year of the Pistol Caliber Carbine, so BCS introduced the PCC chest rig to their chest rig line.
Specs:
Lowest profile Subgun PCC/9mm SBR chest rig on the market
Support 30/32rd magazines
4-2” fully adjustable/removable magazine flaps-Glock18, MP5, Sten, other PCC mags
Molle compatible for user configuration
2″ shoulder webbing with 1″ buckles on the rig
Quick release shoulder and waist buckles
Full length interior pocket
Standard or Pull-forward Lat strap design
H-harness
The PCC chest rig is available in multiple color options and ready for order. Made in the USA
Check out the PCC chest rig at www.beezcombatsystems.com/PCC-pistol-caliber-carbine-chest-rig-BCS-CR-PCC.
TYR Tactical Tuesday – PICO-DS Medical Chest Rack
Tuesday, May 9th, 2017
Introducing the TYR Tactical® PICO-DS Medical Chest Rack. It is the first of many new PICO-DS accessories launching in 2017.
It’s design provides true “Mission Adaptability” for the end user. Our overall design philosophy is centered around priorities of care following the MARCHE protocols. The Medical Chest Rack allows the user to remain hands free and mobile while administering care. Designed specifically around the guidelines from the Committee for Tactical Emergency Casualty Care (TECC). Four Tourniquet GP Pouches feature high strength and abrasion resistant 4-way stretch Tweave. This was used on the gusset of the pouches which allow them to expand when needed. Internal 1” Elastic loops, Bungee and 3/8” MOLLE webbing which provide additional load carriage locations for tourniquets and other medical items. It was built to be worn as a stand-alone chest rack (with its removable H-Harness) or it can be attached to the PICO-DS Assaulters Plate Carrier via the Quick Attach Surface Mount (QASM) buckle system. This quick don and doff feature allows the wearer to rapidly transition between different mission sets.
The TYR Tactical® PICO-DS Medical Chest Rack (TYR-LWMD204-V2) provides true “Mission Adaptability” for the end user. It was designed to be worn as a stand-alone rack or it can be attached to the PICO-DS Assaulters Plate Carrier or PICO-MVW via the Quick Attach Surface Mount (QASM) buckle system. Each rack comes standard with a removable H-Harness. Additionally, a removable antimicrobial/FR treated spacer mesh pad is used internally for comfort and decreased dry time in arid/tropical conditions. Our overall design philosophy is centered around priorities of care following the MARCHE protocols. The Medical Chest Rack allows the user to remain hands free and mobile while administering care. Designed specifically around the guidelines from the Committee for Tactical Emergency Casualty Care (TECC).
Feature:
• Adjustable/Removable H-Harness
• 500-denier Cordura®
• Qty.4 Tourniquet GP Pouches. High strength and abrasion resistant 4-way stretch Tweave is used on the gusset of the pouches which allow them to expand when needed.
• Internal 1” Elastic loops, Bungee and 3/8” MOLLE webbing which provide additional load carriage locations for tourniquets and other medical items.
• Heavy Duty #10 Zipper Closure
• Velcro® Securing tab for quick release access
• Removable H-Harness
• Removable antimicrobial/FR treated spacer mesh pad
• Quick Attach Surface Mount (QASM) buckle system
• Qty.1 Internal and External Pocket with Velcro® Closure
Wt: 24.8 oz.
Dim: 7” H x 9” W x 2.25” D
