SIG SAUER - Never Settle

Archive for the ‘Load Carrying’ Category

Hawkrigger Switch System On Kickstarter

Monday, April 3rd, 2017

kickstarter lead page

The Hawkrigger Switch System is a new belt and buckle system currently up for funding on Kickstarter. The Switch consists of a ballistic nylon belt and three interchangeable stainless steel buckles. The buckles, which can be swapped out in seconds, consist of three styles: Urban, Outrigger SmokeJumpers, and a 38mm Austrialpin Cobra Quick Release.

diagram

The Hawkrigger Switch System is being offered in two webbing colors, Black or Coyote, and two buckle finishes, natural tumbled or Black Titanium PVD hardcoat.

www.kickstarter.com/projects/1019290725/1764344798?token=babce340

Spiritus Systems – Micro Fight Chest Rig Mk 3

Sunday, April 2nd, 2017

IMG_0666

The Micro Fight Chest Rig Mk 3 features soft loop VELCRO in both the front and rear kangaroo pouches so inserts can be used inside either pocket and are interchangeable between the two.

The magazine pouches are also lined with soft loop and are sized to carry six 5.56 rifle magazines or four 7.62 magazines. Additionally, they incorporate drainholes.

They’ve refined their geometry for a sleeker design that carries more gear without increasing the Micro Fight foot print.

IMG_0668

The new Micro Fight Chest Rig Mk 3 is currently available in WOLF Grey, M81, MultiCam, Black, MC Black, and Coyote. Ranger Green will follow, layer this month.

IMG_0669

www.spiritussystems.com

Urban Operator – Slidebloc EDC Belt

Monday, March 27th, 2017

belt

Urban Operator’s Slidebloc EDC Belt is a 1.75″ belt made of nylon webbing, with an Austrialpin Slideblock buckle. The nylon used is made to Mil-W-27265 Type 13 Class 1A MilSpec standard, and is resin treated. The Slidebloc EDC also features a 4″ front loop panel, and a 4″ secret exterior compartment. Available in the following colors: Coyote Brown, Black, Tan, and Foliage Green

urbanoperator.net/collections/slidebloc-edc-belt

SPARTANAT – New from Lindnerhof Taktik 2017

Friday, March 17th, 2017

Lindnerhof Taktik is one of Germany’s leading gear companies. Botth CEOs are former KSK operators. LHT gear is widely spread with German Special Forces and SWAT teams. Here are some new products for 2017.

LH_lowvis

The LowVis plate carrier is the minimalist version of a concealed vest and can be combined with a chest rig. It comes with a pocket which can be used for both, soft and hard armor. The inbuilt plate holder allows fixation of small hard armor plates. The rear section offers the opportunity to attach extra lengths of straps. Furthermore the Velcro surface can be covered, to prevent damaging the outerwear. The carrier can be used as well with the height-adjustable two-row waist belt as with a three-row belt.

LH_plattentraeger_VI

Plattenträger VI. Generation: The sixth generation of the renowned plate carrier comes with three separately usable cable guides on the front. A storage compartment with a Velcro closing is located on the frontal collar region. The inbuilt plate holder allows fixation of small hard armor plates. Furthermore the slim rescue handles provide fast access in critical situations.

LHT-First-759x500

The First Responder pouch was designed to provide fast and straightforward first-response medical assistance. The lid features a small compartment for handling and affixing scissors using a 20 mm strap. Medical emergency equipment can be carried using the lower storage compartment. The removable waist belt offers the possibility to attach the pouch on plate carriers, vests and backpacks using clips, which are sold separately.   

LH_abwurfsack

Through PALS the small Abwurfsack/Dump pouch (single-row) is a very compact, reliable and easily mountable piece of gear. It can be used to safely stow empty magazines, medical waste and other quickly packed material.

LH_Funkgeraetetasche_HL_universal

This reliable Funkgerätetasche/Radio Pouch HL (universal) for transporting radios comes with two lateral elastic bands, which makes it very flexible. The closing mechanism features a cord and a quick-release buckle, offering the possibility to use the radio while inside the pouch.

LH_Klettergurt

The useful features of the Klettergurt/Harness-Set are focused on tactical use. Removable leg loops with quick-release buckles grant a maximum scope of action. Moreover the belt alone can be used with pants and makes it possible to attach holsters. The tie-in loop is made in accordance with norm EN 12277.

LINDNERHOF TAKTIK im Internet: www.lindnerhof-taktik.de
Shop HQG: www.hqg.de
SPARTANAT: www.spartanat.com

B&T – 40MM Ammo Carriers

Wednesday, March 15th, 2017

I spied these leg mounted subloads for 40mm rounds in the Brügger & Thomet booth during Germany’s Enforce Tac expo in Germany. The carrier is meant to be used with the B&T GL06, but they could be handy for anyone using 40mm launchers.

They are offered in different sizes to carry different numbers of rounds, but as you can see, the carriers are long enough for riot control rounds and feature indentations on the sides of the individual round carriers to offer some friction and keep them in place.

www.bt-ag.ch

Claw Gear – New Line Of Laser Cut Mag Pouches

Monday, March 13th, 2017

Swiss brand, Claw Gear, introduced a new line of laser cut magazine pouches during IWA. Made from a composite material called Tacticoat. 

They are similar to many other products on the market with integrated, PALS compatibility. Except, for two things. First off, they are being offered by a European brand, which gives them a leg up in that market.

Second, they developed a means to keep the flap handy, in the event you need to replace the magazine in the pouch. The flap falls forward on the pouch and stays put via Velcro.

This image shows the colors available.

Additionally, they’ve introduced a belt with laser cut PALS slots. It’s called the KD-One and uses a G-hook to secure the running eod of the adjuster. The two G-hooks on either side of the belt in this photo are there to hold the belt for display.

www.clawgear.com

Kickstarter – Mark I, II, III ODIN Tactical Belt System by Raptor Tactical

Friday, March 10th, 2017

Raptor Tactical is promoting their new Mk III ODIN tactical belt system on Kickstarter. Also available are their Mk I & II belts.

The Mk I is similar to a standard rigger’s belt. Inside the ODIN Mk 1 belt there are three compartments with a zipper so you can stash your small items in it like a spare key or money for later use. The Mk II incorprates laser cut PALS webbing. The Mk III also features the laser cut PALS compatible webbing as well as an optional inner belt which can be woen stand alone as a trouser belt or in conjunction with the outer belt. In this case, it relies on Velcro to connect with the outer belt. Additionally, tye belts feature a Velcro section at the back so you can put your name or logo patch on it.

ODIN Mk I

ODIN Mk II

ODIN Mk III

Belt sizes are:
S – 28-32″
M – 32-36″
L – 36-40″
XL – 40-44″

www.kickstarter.com/projects/1149075581/raptor-tactical-odin-tactical-belt-system-mark-i-i

Velocity Systems Releases New Mayflower RC Back Panel

Thursday, March 9th, 2017

The Mayflower RC By Velocity Systems Tactical Back Panel was designed to be used in conjunction with any of their chest rigs. If the Tactical Back Panel is used in combination with the Plate Sleeve and one of their chest rigs, the setup can hold both front and back hard armor plates (Plate Sleeve and Chest Rigs sold separately). The Panel interior includes a plate pocket and separate hydration bladder pocket with a VELCRO® Brand closure. The exterior features include ULTRAcomp 3” shoulder straps, 6 rows of PALS webbing, and adjustable 1” webbing side straps. All materials and workmanship are 100% made in the USA.

Checkout the new Tactical Back Panel at www.velsyst.com/tactical-back-panel.