Features:
Built with two layers Milspec nylon webbing
Good width to carry heavier loadout
D-Ring extraction ring integrated within the buckle
100% hand made in USA by Veteran
Material:
4088 type 13 Nylon webbing
Mil-Spec 17337 Nylon webbing
Mil-Spec # 69 Nylon bond thread
1’’ inch AustriAlpin Original Cobra Buckle with D-ring
Mil-Spec Velcro
We’ve teased it a couple of times during development but it’s now available. The Mayflower Jungle Kit is designed to provide a load carriage solution for the hot, wet jungle environment. The pouches were designed around the amount and type of equipment usually needed for long duration jungle patrolling. All the pouches feature the Helium Whisper attachment system (zero water absorbency) and large diameter drain holes.
All materials and workmanship are 100% made in the USA. I’ve got a set in Coyote and if you’re looking for a belt kit, this is the one to get.
Four (4) kit options featuring different pouch setups:
Kit Option 1: 5.56, General Purpose Jungle Kit
Included: (4) 5.56 Pouches, (2) Canteen (2) GP Pouches (1) Harness and Belt Setup
Kit Option 2: 5.56, BP Jungle Kit
Included: (4) 5.56 Pouches, (2) Canteen (1) Butt Pack (1) Harness and Belt Setup
Kit Option 3: 7.62, General Purpose Jungle Kit
Included: (4) 7.62 Pouches, (2) Canteen (2) GP Pouches (1) Harness and Belt Setup
Kit Option 4: 7.62, BP Jungle Kit
Included: (4) 7.62 Pouches, (2) Canteen (1) Butt Pack (1) Harness and Belt Setup
The Jungle 40mm Chest Pouch Set is also now for sale as an additional accessory.
For more information and photos visit www.velsyst.com/jungle-kit.
*All the pouches listed below will also be for sale individually
During last Friday’s drop, Triple Aught Design introduced two cool new products, the Axis Expedition Duffle and Catalyst Field Shirt
Features:
* Made from Polyant LS42 and X51
* 5 rows of 1” webbing loop pairs along inside floor for panel, cube, and other storage attachments
* Webbing key loop attachment inside mesh pocket on lid
* 1” elastic retainers on shoulder straps to capture loose webbing ends.
* Removable padded shoulder straps/ carry handles accommodate 3 modes of carry: Side Carry, Shoulder strap, & Backpack mode.
* Reinforced grab handles at front and back with tie-down loops
* 3” x 4.5” luggage tag included featuring TAD logo, loop velcro for patches, and concealed business card slot.
* 6 side compression straps (3 per side)
* Made in USA
Volume:
* Small: 50 liters (3432 cu in)
* Medium: 75 liters (5070 cu in)
* Large: 100 liters (6272 cu in)
Dimensions
* Small: 13” W X 24” H X 11” D
* Medium: 15” W X 26” H X 13” D
* Large: 16” W X 28” H X 14” D
Weight:
* Small: 0.9kg (31.84oz)
* Medium: 1.04kg (36.64oz)
* Large: 1.23kg (43.52oz)
* Relaxed Fit
Materials
Shell
* 101 g/m² 100% Nylon Ripstop
* UPF 50
* Moisture Wicking finish
* Made in USA
Insulation
* 51 g/m² Polartec Alpha
* 70% recycled polyester, 30% polyester
* Made in USA
Lining
* 95 g/m² 100% Nylon
* Made in USA
Weight for Medium
* Weight : 0.59kg (20.8oz)
Pocket Configuration
* Two Chest Pockets with Snap Closure
* Two Zippered Hand Pockets
* All Zippers Are YKK® Zippers
Cuff & Sleeve Configuration
* Double-Snap Barrel Cuff
* Single Snap Sleeve Placket
* Reinforced Elbow
Made In USA
Many predicted 2017 would be the year of the Pistol Caliber Carbine, so BCS introduced the PCC chest rig to their chest rig line.
Specs:
Lowest profile Subgun PCC/9mm SBR chest rig on the market
Support 30/32rd magazines
4-2” fully adjustable/removable magazine flaps-Glock18, MP5, Sten, other PCC mags
Molle compatible for user configuration
2″ shoulder webbing with 1″ buckles on the rig
Quick release shoulder and waist buckles
Full length interior pocket
Standard or Pull-forward Lat strap design
H-harness
The PCC chest rig is available in multiple color options and ready for order. Made in the USA
Check out the PCC chest rig at www.beezcombatsystems.com/PCC-pistol-caliber-carbine-chest-rig-BCS-CR-PCC.
Introducing the TYR Tactical® PICO-DS Medical Chest Rack. It is the first of many new PICO-DS accessories launching in 2017.
It’s design provides true “Mission Adaptability” for the end user. Our overall design philosophy is centered around priorities of care following the MARCHE protocols. The Medical Chest Rack allows the user to remain hands free and mobile while administering care. Designed specifically around the guidelines from the Committee for Tactical Emergency Casualty Care (TECC). Four Tourniquet GP Pouches feature high strength and abrasion resistant 4-way stretch Tweave. This was used on the gusset of the pouches which allow them to expand when needed. Internal 1” Elastic loops, Bungee and 3/8” MOLLE webbing which provide additional load carriage locations for tourniquets and other medical items. It was built to be worn as a stand-alone chest rack (with its removable H-Harness) or it can be attached to the PICO-DS Assaulters Plate Carrier via the Quick Attach Surface Mount (QASM) buckle system. This quick don and doff feature allows the wearer to rapidly transition between different mission sets.
The TYR Tactical® PICO-DS Medical Chest Rack (TYR-LWMD204-V2) provides true “Mission Adaptability” for the end user. It was designed to be worn as a stand-alone rack or it can be attached to the PICO-DS Assaulters Plate Carrier or PICO-MVW via the Quick Attach Surface Mount (QASM) buckle system. Each rack comes standard with a removable H-Harness. Additionally, a removable antimicrobial/FR treated spacer mesh pad is used internally for comfort and decreased dry time in arid/tropical conditions. Our overall design philosophy is centered around priorities of care following the MARCHE protocols. The Medical Chest Rack allows the user to remain hands free and mobile while administering care. Designed specifically around the guidelines from the Committee for Tactical Emergency Casualty Care (TECC).
Feature:
• Adjustable/Removable H-Harness
• 500-denier Cordura®
• Qty.4 Tourniquet GP Pouches. High strength and abrasion resistant 4-way stretch Tweave is used on the gusset of the pouches which allow them to expand when needed.
• Internal 1” Elastic loops, Bungee and 3/8” MOLLE webbing which provide additional load carriage locations for tourniquets and other medical items.
• Heavy Duty #10 Zipper Closure
• Velcro® Securing tab for quick release access
• Removable H-Harness
• Removable antimicrobial/FR treated spacer mesh pad
• Quick Attach Surface Mount (QASM) buckle system
• Qty.1 Internal and External Pocket with Velcro® Closure
Wt: 24.8 oz.
Dim: 7” H x 9” W x 2.25” D
Constructed the same as our original DAKA pouches, the newest models are size optimized for storage of firearm sound suppressors and their accessories. Rugged and easy to clean, they are ideal for storage or transport of your suppressor along with your NFA paperwork. Available in three sizes to accommodate rimfire through 7.62 rifle cans.
Features:
• Reinforced polymer fabric with anti-slip texture
• Welded construction creates permanent impenetrable seals
• YKK AquaGuard™ water repellant zipper
• 550 Paracord with heat shrink tubing for enhanced grip, even with gloves
• Paint pen dot matrix debossed into body for identification marking
• Not for use with hot suppressor
• Small pouch fits Rimfire
• Medium pouch fits 5.56
• Large pouch fits 7.62
• Made in the USA
Constructed with a TPU side panel and top zipper to allow vertical insertion of documents. The fully sealed transparent window allows for easy viewing of the contents and also allows the user to manipulate any touch-screen devices inside.
Features:
• Reinforced polymer fabric with anti-slip texture
• Welded construction creates permanent impenetrable seals
• YKK AquaGuard™ water repellant zipper
• 550 Paracord zipper pull with heat shrink tubing for enhanced grip, even with gloves
• Paint pen dot matrix debossed into body for identification marking
• Window: Matte TPU
• Dimensions:13.6”x12.7”
• Made in the USA
Introducing the TYR Tactical® PICO-DS Sniper Chest Rack. It is the first of many new PICO-DS accessories launching in 2017. They’re design provides true “Mission Adaptability” for the end user. The DSCR001 is built using our combat adjustable magazine design, enabling the wearer to run either (4) 5.56mm or 7.62mm magazines, (2) of any size pistol magazines, and two GP pouches. It was built to be worn as a stand-alone chest rack (with its removable H-Harness) or it can be attached to the PICO-DS Assaulters Plate Carrier via the Quick Attach Surface Mount (QASM) buckle system. This quick don and doff feature allows the wearer to rapidly transition between different mission sets.
Features:
• Medium General Purpose (GP) Pouch Dim: 4.5”H x 6.25”H x 1.25”D
• Small General Purpose (GP) Pouch Dim: 4.5”H x 3.25”H x 1.25”D
• Four Combat Adjustable Mag Pouches that conform to both the 5.56 and 7.62 magazines. They are secured internally with a rubberized contact-grip material when retention bungies are not in use.
• Two 9mm Pistol Mag Pouches. They are secured internally with a rubberized contact-grip material and magnets when retention bungies are not in use.
• Both GP Pouches have internally sewn Velcro® loop to secure items when stowed.
• MOLLE/PALS webbing on the H-Harness allows for the attachment of carabiners and other mission specific gear.
• High strength and abrasion resistant 4-way stretch Tweave is used on the gusset of the small GP pouch which allow it to expand when needed.
• Adjustable/Removable shoulder and waist straps
• 500-denier Cordura®
All of TYR’s products are 100% Berry Compliant. It’s not only manufactured in in the United States but so are all of the materials. Down to the last thread. Quality above quantity. They are proud to support the American workforce. More than a mantra, INNOVATE OR DIE®!
