Optics | Soldier Systems Daily Soldier Systems Daily

Archive for the ‘Optics’ Category

SIG SAUER Electro-Optics Introduces the Next Revolution in Red-Dot Optics: THE ROMEO-M17

Friday, April 14th, 2023

NEWINGTON, N.H., (April 14, 2023) – SIG SAUER Electro-Optics is proud to introduce the ROMEO-M17 pistol mounted red dot sight. Developed from the ground up for the U.S. Army’s Modular Handgun System to be the ultimate in performance, reliability and durability. The ROMEO-M17 is designed specifically to fit U.S. Military Modular Handgun System M17/M18 pistols, M17/M18 Commemorative Special Editions and M17/M18 Surplus pistols with a single hole in the slide to secure the sight plate. It does not fit standard P320 or commercial P320-M17/M18 slides. Commercial variations of compatible pistols and slides will be available in the coming months.

“The fully sealed ROMEO-M17 is the next revolution in red dot optics; it answers the call to withstand the rigors of the battlefield and works seamlessly with the U.S. Army’s Modular Handgun System,” said Andy York, President, SIG SAUER Electro-Optics. “The ROMEO-M17 is the first red dot sight to incorporate SIG SAUER’s patent pending SIG-LOC™ mounting system. SIG-LOC (Leveraged Optimized Connection) features a new proprietary bottom-mount technology that has multiple interface features between the pistol slide and the optic that provides for an extremely strong and robust lock-up. This new mounting system, when combined with the side mounted battery on the ROMEO-M17, allows the optic to have an extremely low position when mounted to the slide, giving the user a full sight picture and co-witness with the existing standard-height iron sights. This sight was engineered, tested, and built in Oregon to be the ultimate aiming solution for the MHS pistols.”

The SIG SAUER Electro-Optics ROMEO-M17 is a mil-spec, fully enclosed and gas-purged red dot reflex sight with a distortion-free glass aspheric lens, and is submersible to depths up to 35 meters. Other features include a new and very robust flexure-arm adjustment system made of the same Beryllium Copper found in many riflescope designs, and a housing that is forged and machined from 7075 Aluminum with an integrated loaded chamber indicator (LCI) gas deflector and machined anti-reflection grooves on all rear facing surfaces for reduced glare. The optic incorporates a high-efficiency point source red LED emitter, with 2 MOA dot/32 MOA circle reticle, independent brightness adjustment buttons, 15 brightness settings including night vision settings, and a side-mounted CR2032 battery compartment with a threaded battery cap so the optic does not need to be removed from the pistol for battery changes. The ROMEO-M17 has a minimum continuous runtime of 50,000 hours at medium brightness setting, and utilizes MOTAC™ (Motion Activated Illumination), MAGNETAC™ (Magnetic Activation), and D.A.R.C™ (Dark Adaptive Reticles & Coatings) technologies.

“The ROMEO-M17 is the pinnacle of pistol-mounted red dot optics, and we are immensely proud that it has been tested and selected to receive a NATO Stock Number (NSN) from the U.S. Army so this innovative technology and ruggedized performance is easily attainable and available to our warfighters,” concluded York.

The SIG SAUER Electro-Optics ROMEO-M17 is designed, developed, tested and fully assembled in the U.S.A.

ROMEO-M17 Specs:

Objective Lens Diameter: 24mm
Reticle: Circle dot with 2 MOA Red Dot / 32 MOA Circle
Lens Type: Asphere
Brightness Adjustment Settings: 15 (12 Day / 3 Night Vision)
Water Resistance: Submersible to 35 meters (115 feet)
Overall Length: 2.4 inches
Overall Width: 0.9 inches
Overall Height: 1.1 inches
Mounting Footprint: SIG-LOC™ MHS
Battery Type: CR2032
Battery Location: Side
Weight (w/o battery): 1.5 ounces

For more information about the SIG SAUER Electro-Optics ROMEO-M17 or watch the product video please visit sigauer.com.

Posted in Advertiser, Optics, Press Release | 1 Comment »

Nightforce Optics Introduces NEW MOA-XT Reticle

Friday, April 14th, 2023

Orofino, ID, U.S. – (April 14, 2023) Nightforce Optics is excited to announce the latest in Minute of Angle (MOA) reticles, the MOA-XT. The MOA-XT is designed to provide the same shooting experience as Nightforce’s popular MIL-XT reticle.

Many MOA reticles lack common features of modern milliradian (MRAD) based reticles. The MOA-XT provides a grid of holdover points below the main stadia, allowing shooters to compensate for both windage and elevation. The floating center dot provides a fine aiming point for precise shots. The main stadia includes 1 MOA marks with labels every 2 MOA to ensure clear shooting references in hasty or stressful engagements. The grid consists of an array of horizontal dots that are broken up by a bold dot every 4 MOA for fast counting. Throughout the reticle, reference numbers are alternated in size to provide confidence and speed of engagement at any magnification. In combination, these features allow for faster long-range shooting and more precise holds.

“Over the last few years, improvements in the precision of hunting firearms and ammunition and the growth of shooting disciplines like NRL Hunter created a need for reticles with improved holdover shooting capability. Our goal was to give MOA shooters all the features required for these new shooting challenges, without switching to an MRAD reticle. The MOA-XT reticle brings the holdover capabilities and intuitive labeling of our most popular MRAD reticle for field shooting, the MIL-XT, while maintaining MOA graduations. .” said Chad Van Brunt, the Director of Marketing and Product Management for Nightforce Optics.

The MOA-XT reticle is Nightforce’s solution for hunters, competitors, and all shooters who require the versatility of a holdover-style reticle and prefer a minute of angle scope. Riflescopes are available in the following models.

– ATACRTM 7-35×56 F1

– ATACRTM 5-25×56 F1

– ATACRTM 4-20×50 F1

– ATACRTM 4-16×42 F1

– NX8TM 4-32×50 F1

– NX8TM 2.5-20×50 F1

For more information on the MOA-XT and other Nightforce Optics products, please visit

nightforceoptics.com

Posted in Advertiser, Optics, Press Release | 3 Comments »

Langdon Tactical Expands RDO Solution for Beretta 92 Pistols at NRAAM Indianapolis

Thursday, April 13th, 2023

(Indianapolis, IN) – Langdon Tactical is proud to announce the expansion of their standard-setting RDO mounting solution for the Beretta 92 to include nearly all Beretta 92 models built since 1982.

Previously, only 92 pistols with Vertec slides (Elite LTT, 92X, M9A3, etc) could be cut for the LTT Red Dot Optic (RDO) solution. The Gungineering team at LTT, led by Ernest Langdon, now has an RDO solution for the 92X Performance, Brigadier, 92FS, 92D, including Beretta’s newest additions, the M9A4, 92XI and other Beretta-production RDO models.

“After the introduction and subsequent success of our original 92 RDO solution in July 2020, we immediately realized this solution was needed for other 92 models” says Ernest Langdon, President of LTT “my team and I sharpened our pencils and got to work developing the LTT RDO solution for the wide variety of different 92 models on the market, for an optic cut as low or lower than most direct milled striker systems”

LTT’s RDO Solution is a true LOW RDO cut with a dot height above the center of the bore of just .85″ (when paired with a Trijicon RMR).

Introduced in 2020, the critically acclaimed (Garand Thumb, Sage Dynamics, 1911 Syndicate) LTT RDO solution has evolved to also include both the Beretta PX4 and the HK P30 series of pistols, also offered by Langdon.

In 2022, the LTT RDO cut for 92 pistols was approved by the Los Angeles County Sheriffs Department for duty use by individual officers, following an intensive testing and evaluation by the LASD training staff.

To see the full line up of pistols LTT is currently offering their Red Dot Optic cut visit our booth (5873) at the NRA Annual Meeting in Indianapolis April 14th-16th 2023.

For all things LTT, check out www.LangdonTactical.com

Posted in NRA, Optics, Press Release | Comments Off on Langdon Tactical Expands RDO Solution for Beretta 92 Pistols at NRAAM Indianapolis

Bushnell’s KC Eusebio Sweeps U.S. Steel Nationals with New RXM-300 Reflex Sight

Thursday, April 13th, 2023

OVERLAND PARK, Kan. – April 12, 2023 – Bushnell®, an industry leader in performance optics, congratulates pro shooter KC Eusebio for his recent win at the U.S. Steel Nationals, which took place in New Smyrna Beach, Florida. Eusebio took first place in the Open Division and First Overall using the new Bushnell RXM-300 Reflex Sight.

Eusebio, who worked with Bushnell on the design of the RXM-300, was successful in winning his first major match of the year using the new reflex sight. With its extra-large lens, multiple intensity adjustments and robust housing, the RXM-300 is perfectly suited for the fast-paced style of the steel shooting competition.

“Being able to win a national championship so early in the year is a fantastic feeling,” Eusebio said. “Add to it, winning for the first time with the new Bushnell red dot makes this title even better.”

Introduced earlier this year, the RXM-300 is a versatile, large lens, 4 MOA red dot with optimized hood geometry for faster target acquisition and shot follow-up without sacrificing durability. That not only makes it the perfect competition sight for pro shooters like Eusebio, but also makes it a great option for carry, home defense and hunting.

“The RXM-300 did its job and performed at the highest level,” added Eusebio. “I’m so very proud of this new dot that I can’t stop sharing it with anyone who shoots or competes. By far, my favorite features are the unbelievable field of view it offers, the 12 brightness settings and the incredibly durable housing.”

To learn more about the feature-packed RXM-300 Reflex Sight or to see the full lineup of Bushnell optics, check out Bushnell.com.

Posted in Optics, Press Release, Shooting Sports | Comments Off on Bushnell’s KC Eusebio Sweeps U.S. Steel Nationals with New RXM-300 Reflex Sight

NEW AGM Sidewinder Premium Thermal Monoculars – Now Available

Thursday, April 13th, 2023

The Sidewinder™ thermal monoculars are now available for purchase!

The Sidewinder is our premium handheld observational thermal monocular series. The Sidewinder thermal sensors also come equipped with the most sensitive temperature ratings in its class, coming in at sub-20 millikelvin across the entire product family.

All models come equipped with either a 384×288 or 640×512 twelve-micron infrared detector and a 1024×768 OLED display, for improved color rendering. Other improvements over the Taipan monoculars include a more robust body/housing and a removable, rechargeable 18650 battery. These units also boast an impressive waterproof rating, which ensures users have peace of mind while using the Sidewinder in harsh weather conditions.

The Sidewinders built-in 64 GB memory also sits at the top of its class on the market, with advanced software supporting both video and audio recording.

To learn more about the Sidewinder visit AGMGlobalVision.com

Posted in NRA, Optics, Press Release | 1 Comment »

XS Sights to Attend 2023 NRA Annual Meetings and Exhibits

Wednesday, April 12th, 2023

Fort Worth, Texas (April 10, 2023) – XS® Sights, makers of the fastest sights in any light and the tools needed to install them, will display its newest products for personal defense and hunting at the 2023 NRA Annual Meetings and Exhibits in Indianapolis, Indiana, April 14-16. Attendees are encouraged to stop by the XS Sights Booth (# 4621) to meet the team and try XS’ laser shot simulator to experience the increased speed and accuracy of shooting with DXT2 Big Dot and R3D night sights. Designed for personal defense, XS’s proprietary Glow Dot technology surrounding the tritium vial in these front sights provides dual illumination and unsurpassed front sight visibility in all light conditions.

New standard dot sights, with green or orange front sight, for the Taurus 856 revolver and new R3D sights (green or orange) for the Kimber K6 will be on display along with many other night sights designed for personal defense. XS will also showcase its new Inline Rear Sight Pusher Tools for Glock pistols – a DIY version and a Gunsmith model – in addition to new lever rail and ghost ring sights for Henry Big Boy Carbines.

“We are excited to meet with NRA members, show them our newest products and, if they are looking to upgrade their factory sights, help them find the sight-style that best works with their eyes,” said Addison Monroe, Marketing Manager, XS Sights. “Our products are designed to enhance firearm owners’ shooting experience by offering improved sight visibility, speed, and accuracy.”

For more information, visit www.xssights.com.

All XS Sights are backed by a 10-year, No Questions Asked Warranty and XS’s 30-Day Satisfaction Guarantee.

Posted in NRA, Optics, Press Release | Comments Off on XS Sights to Attend 2023 NRA Annual Meetings and Exhibits

IVAS 1.2

Monday, April 3rd, 2023

IVAS 1.2 features an improved form factor and a lower profile heads-up display with distributed counterweight for improved user interface and comfort.