North Logan, UT- Anarchy Outdoors, a leading industry innovator and supplier of precision rifle components and other high-performance firearms accessories, has introduced significant ergonomic upgrades for select Accuracy International rifle systems.  Designed in partnership with Accuracy Obsession, these precision-oriented upgrades include a Thumb Rest for a proper precision rifle grip, an improved Adjustable Cheek Piece for better eye-to-scope alignment and a Spigot Mount for superior bipod attachment.

A thumb rest is critical for a proper grip when shooting a precision rifle.  Most shooters in the precision rifle discipline do not curl their thumb around the grip in the traditional manner but position it on the trigger finger side of the grip.  This helps eliminate torque while squeezing the trigger and keeps the rifle on target.  The Anarchy Outdoors Thumb Rest provides an ergonomic and repeatable-position support on the strong side of the grip for the thumb to rest on, providing much better hand alignment and consistent trigger pull.  The Thumb Rests are manufactured from composite Nylon 12 material, resulting in a strong, thin, and perfectly textured interface.  Available in black with an MSRP of $39.99 Thumb Rests are compatible with select versions of the “AT” and “AX” rifle systems.  Please visit www.anarchyoutdoors.com/accuracy-international-thumb-rest for complete model compatibility.

The Anarchy Outdoors Adjustable Cheek Piece is thinner and can be set lower than the factory version to allow mounting the rifle’s scope lower to the bore axis and still provide better and more comfortable eye alignment.  This minimizes the effect of parallax and the greater range of adjustment allows setting the comb height for maximum comfort while in the shooting position.  Made from composite Nylon 11, the installation only takes minutes using a basic Allen wrench.  The Adjustable Cheek Piece fits the factory AX buttstock and the AX-AICS R700 Chassis and is now available with an MSRP of $59.99.  Please visit www.anarchyoutdoors.com/accuracy-international-ax-aics-cheek-piece-low

The new Spigot Mount from Anarchy Outdoors provides an upgraded bipod attachment point for select Accuracy International AE, AT and AW rifle systems including the AWM and AW50.  Models are available for bipods that attach to either Picatinny or Arca Swiss type rails.  Rather than mount the bipod to the bottom of the stock, the Spigot Mount positions the bipod closer to the bore axis and further toward the muzzle by extending out from the front of the stock rather than the bottom.  This results in greater stability and accuracy.  All versions of the Spigot Mount are machined from a single piece of 6061-T6 Aluminum and are Type-III hard coat anodized black.  This one-piece bipod mount replaces the Accuracy International factory bipod “block” held within the square tube forend to provide the user a rigid bipod attachment point.
User installation is easy. It requires a 5/16” roll pin punch, 2.5mm Allen Key, 3mm Allen Key, and blue Loctite.  The Anarchy Outdoors Spigot Mounts have an MSRP of $119.99.  For more information please visit www.anarchyoutdoors.com/accuracy-international-spigot-mount

Fort Worth, Texas: CMC Barrels™ is proud to announce its highly anticipated line of CMC AR Barrels. Since the 2018 inaugural launch of the CMC Glock® Match Precision Barrel, CMC has had the objective of developing a series of high-quality AR Barrels that complement their exceptional line of AR aftermarket products. The CMC Barrels™ AR Barrel line does just that.

With input received from military, law enforcement, and civilian shooters incorporated into the core engineering of their AR barrels, CMC has been able to accommodate the modern-day shooting requirements requested. Every barrel is precision, instrument-inspected for absolute straightness and air gauged for maximum uniformity, yielding the highest accuracy possible. Land and groove tolerance from breech to muzzle can vary only .0001″ for the best concentricity.

The first profiles availed will be based on the SOCOM variant. The CMC’s AR15 barrels are made from 4150 Chrome Moly Vanadium, coated in H&M Blacknitride+™ for increased wear resistance, chambered in .223 Wylde so that you can feed it both .223 and 5.56 NATO ammo. 

CMC’s AR15 Barrels provide a choice of gas system lengths along with M4 feed ramps for reliability, a 1:7? twist rate, 1/2?x28 thread pattern to fit standard AR15 muzzle devices, 11-degree match crown for increased accuracy and a bottom dimple for easy install and alignment of gas blocks. 

CMC AR15 barrels are coated in H&M Blacknitride+™ or Ferritic Nitrocarburizing, resulting in significantly improved surface properties on ferrous metal parts while maintaining dimensional and shape stability. H&M Blacknitride+™ yields increased wear resistance, improved fatigue strength, better corrosion resistance, improved lubricity, and enhanced cosmetic appeal. 

CMC Barrels™ AR15 Barrel Features:
• Optimal length gas systems for barrel lengths
• 1:7″ twist rate
• M4 feed ramps for reliability
• Air Gauged tested for consistency
• 1/2″x28 thread pattern to fit standard AR15 muzzle devices
• 11-degree match crown for increased accuracy
• Bottom dimple for easy gas block install and alignment

CMC Barrels™ AR15 Barrel Technical Specs:
• Barrel Lengths Currently Available: 7.5″, 10.5” and 16.25”
• Barrel Profile: SOCOM
• Barrel Material: 4150 Chrome Moly Vanadium
• Barrel Type: Button Rifled
• Barrel Coating: H&M Blacknitride+™
• Barrel Caliber: .223 Wylde
• Barrel Gas System Currently Available: Pistol, Carbine and Mid
• Barrel Twist: 1:7
• Barrel Extension: M4 Type Feed Ramps
• Gas Block Diameter: .750″
• Gas Block Journal Length: 1.13″
• Muzzle Thread: 1/2-28 TPI
• Testing: Air Gauged
• Weights Currently Offered: 7.5”-1.02 lbs., 10.5”-1.3 lbs. and 16.25”-2.0 lbs.

CMC’s barrels are complimented by their Low Profile AR15 .750 Nitride Finish Gas Block, AR15/10 Nitride Coated Gas Tubes, and Enhanced Bolt Carrier Groups. Like all CMC Barrels™ and CMC Triggers™ products, the CMC Barrels™ Profile Barrel is exceptionally well made, more durable than standard stock barrels, and includes CMC’s Satisfaction Guarantee and Lifetime Warranty.

For more information on the CMC Barrels™ AR Barrel or other products offered by CMC, please visit www.cmctriggers.com.