SureFire

Posts Tagged ‘BE Meyers’

BE Meyers 40th Anniversary Video

Tuesday, June 3rd, 2014

Specialists in the field of photonics, Seattle-based BE Meyers is celebrating their 40th Anniversary. I’ve been using their products since the late 90s and I can tell you, their stuff always works as advertised. Over the past few years I’ve also had the opportunity to get to know them on a more personal level and I can tell you that they are a great team of people.

B.E. Meyers & Co., 40th Anniversary from B.E. Meyers & Co. Inc. on Vimeo.

Congrats guys and here’s to 40 more!

www.BEmeyers.com

Be Sure To Visit BE Meyers and Tactical Tailor During SOFIC

Tuesday, May 13th, 2014

Tactical Tailor and BE Meyers will be at SOFIC dockside outside of Jackson near the convention center.

TT-BE Meyers at SOFIC

Schedule:

19 JUN – Partner/Distributor Cocktail Hour 1700-2000

20 JUN – End-user Cocktail Hour1700 -2100

21 JUN – Cocktail Hour Cruise. Invite only for key customers due to boat capacity restrictions on open water. 1700, set sail around 1730, ~1hr on the water.

Contact Nate Smith at Tactical Tailor nate@tacticaltailor.com or Johnny Moir of BE Meyers johnny.moir@bemeyers.com to schedule an appointment.

TacJobs – BE Meyers Seeks a Mechanical Design Engineer

Thursday, March 13th, 2014

Based in the Seattle, Washington area, BE Meyers is seeking Mechanical Design Engineer to join their team.

SUMMARY: The Mechanical Engineer will research, plan, design, and test mechanical, electro-optical and electromechanical products and systems such as night vision, lasers, and weapon sights; coordinate activities involved in fabrication, operation, application, installation, and repair of mechanical or electromechanical products and laser systems. This position will have latitude and creativity in generating ideas for the creation, design, prototyping, and testing of new products. Familiarity with firearms is a must, and a passion for firearms and their use in military and law enforcement roles is a plus. Engineers with military combat experience and familiarity with military equipment and systems are highly encouraged to apply.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.
• Enthusiastic and able to provide innovative and creative solutions
• Proposes new designs or concepts for review based on customer’s needs.
• Extensively use SolidWorks to layout and design complex mechanical, optical, electrical assemblies and parts.
• Conducts analysis, thermal and stress, to validate design approach
• Prepares technical reports including obtaining historical data and information, as well as direct involvement in projects.
• Assist with the preparation of estimates, cost reports, forecasts, schedules, account codes, budgets, and change orders.
• Creates engineering documents and drawing designs to produce product.
• Plans and conducts design verification testing for products and prototypes to ensure that the design meets specifications.
• Documents assembly procedures, work instructions, manufacturing instructions, technical manuals and BOM’s.
• Provide mechanical, optical, software and electrical engineering support, including assisting with product assembly, developing systems, and test equipment development.
• Direct and coordinate fabrication and assembly activities to ensure products and systems conform to engineering design and customer specifications
• Assess and applies MIL-STD documents to product design and testing.
• Supports internal and external customers as needed.
• Provides production support.
• Provides technical support to business development and manufacturing
• Research and analyze data such as customer design proposal and specifications to determine feasibility of design or application.
• Develop specifications, system architecture, test methodologies, and test equipment to design, manufacture and assist in new product release.
• Develop and conduct design DVT programs to ensure product meets requirements and complete documentation and reports for regulatory submission.
• Other duties as assigned.

QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• Strong communication skills.
• Executes assignments to company and customer standards.
EDUCATION and/or EXPERIENCE
Bachelor’s Degree (B.S.) in Mechanical Engineering or equivalent from four year college or university, and two to four years related experience. Associate’s Degree (A.A.) in Mechanical Engineering and 10 to 15 years of experience; or equivalent combination of education and experience.
• Experience with an emphasis on product design, including designing for manufacture and assembly.
• Experience with metrology equipment.
• Experience with Opto-electronic mechanical design.
• Experience with Geometric Dimensioning and Tolerancing (GD&T).
• Experience with high-volume manufacturing methods.
• Experience with adherence to MIL-STD.
• CAD modeling design skills and CAD drafting skills required. SolidWorks preferred.
• Experienced in New Product Introduction methodology.
• Experienced in Design for Manufacture and assembly methodology.
• Experience with rapid prototyping processes such as Stereolithography.
• Experience in design for NC machining.
• Experience in launching products in a structured environment as a team member or leader.
• Experience in product development efforts requiring system and component level design and troubleshooting.
• Experience in organization and communication with design and development engineers to understand performance criteria and required testing.
• Experience in the technical and regulatory requirements specifications and processes associated with complex military devices.

For full details and an opportunity to apply visit bemeyers.applicantpro.com/jobs.

Warrior Expo – BE Meyers

Wednesday, March 5th, 2014

While it’s been around awhile, there continues to be a demand for the AN/PEQ-11A.

20140305-115301.jpg

Also referred to as a Dial 100G, it features a Green laser pointer as well as a dual collimated IR Pointer and illuminator. Designed for use with crew served weapons at NSW’s Special Boat Teams, the IR pointer stays in the center of the IR flood which offers 55 Deg coverage up to 5 km.

20140305-115921.jpg

The PEQ-11A is completely programmable via cable and is mountable via a Picatinny compatible mount.

www.bemeyers.com

Weapon Outfitters Lowers Price On B.E. Meyers Flash Hider

Tuesday, December 17th, 2013

_dsc0163_1_1

The B.E. Meyers 249F 5.56 flash hider is currently being offered by Weapon Outfitters at Government pricing. This is your chance to own the industry standard 5.56 flash hider at a greatly reduced price.

www.weaponoutfitters.com/be-meyers-flash-hider-for-5-56mm-weapons-1.html#

BE Meyers “Drive Fast. Shoot First” Morale Patch Available Now From Weapon Outfitters

Saturday, October 26th, 2013

20131025-201320.jpg

The BE Meyers “Drive Fast. Shoot First” Morale Patch was created to support the Special Operations Warrior Foundation, with 100% of profits being donated to the cause. For every 100 patches that are purchased, they will post an image of the donation check on their Facebook and Tumblr pages, so be sure to check it out!

www.weaponoutfitters.com

BE Meyers Night Demo

Thursday, September 12th, 2013

www.bemeyers.com

Warrior Expo – BE Meyers

Friday, July 12th, 2013

BE Meyers is the new exclusive domestic distributor for the Mil Systems Group TriRail Light Bracket which extends a standard Mk 93 cradle, offering forward of the turret shield mil-std 1913 mounting of optics and illuminators.

20130712-122627.jpg

Here you can see an IZLID 200 CR123 version which would be remotes via a cable operationally. The gun shield is not installed for this demonstration.

20130712-122650.jpg

20130712-122724.jpg

20130712-122737.jpg

www.bemeyers.com