Duro Textiles LLC | Soldier Systems Daily Soldier Systems Daily

Posts Tagged ‘Duro Textiles LLC’

MultiCam Materials – 330D Cordura

Friday, June 8th, 2012

Every two weeks SSD showcases a different MultiCam print fabric from Duro Textiles LLC. This week, we are covering Omega. MultiCam is a single camouflage pattern designed to hide the wearer in varied environments, seasons, elevations, and light conditions. After a great deal of commercial success and adoption by elements of US Special Operations Forces, in 2010 MultiCam was selected for use by the US Army as its Operation Enduring Freedom Camouflage Pattern (OCP).

Duro prints on genuine Cordura fabric from Invista. A light-weight fabric, 330D Cordura is used by many manufacturers for use in targeted applications in concert with other materials to lower the overall weight of the item. Additionally, certain manufacturers build specialized load carrying items using primarily 330D for ultralight-weight items. This material is coated on the back side for water resistance and features a face side finished with a durable water repellent.

Specs:
Finished Width – 60 inches cuttable
Finished Weight – 6 oz/yd² approximately
Fiber Content – 100% nylon
Construction – 60/40 (warp/fill)
Breaking Strength – 200/155 (warp/fill) (lbs, minimum)
Download a test report here.

UW Chest rigs from Mayflower Research & Consulting combine low profile and low weight design elements to carry a fighting load. Well known for their no-BS design approach, Mayflower bases their gear on use by those carrying realistic combat loads. The Gen III model UW Chest Rig seen here is currently only sold as a bulk custom item. Contact Mayflower Research & Consulting to discuss your requirements and for details on minimums.

Duro offers progressive pricing based on the number of yards ordered. For more information on this or any of the full line of MultiCam fabrics visit www.multicamfabric.com or email Galpen_Ben@DuroLink.com.

Tags: Cordura, Crye Precision, Duro, Duro Textiles LLC, Invista, Mayflower Research and Consulting LLC, Multicam
Posted in 330, Materials, Multicam | Comments Off on MultiCam Materials – 330D Cordura

MultiCam Materials – Omega

Tuesday, May 22nd, 2012

Duro’s Omega is a polyester mesh which offers a high tear strength matrix featuring a 2mm hole diameter. This means high breathability and the ability to look through fabric for camouflage applications. This product is commonly used for concealing vehicles as well as creating lightweight and high strength tactical gear. One place you will see it is on the new helmet covers from Crye Precision and FirstSpear. However, one of the best applications we have seen is Tactical Concealment Manufacturing Corp’s MCM Cobra with Hood which is a ghillie foundation.

Finished Width – 58 inches cuttable approximately
Finished Weight – 8 oz/yd² approximately
Fiber Content – 100% polyester
Mesh Holes – 10 per inch both directions
Tear Strength – 16 lbs typical both directions
Download a test report here

Tactical Concealment’s MCM Cobra with Hood is a great ghillie foundation. It’s cloak-like design is intended for use as an “Assaulter’s Ghillie” and can be worn in conjunction with combat equipment such as armor vests and load carrying systems as well as low profile backpacks. Additionally, the hood is oversized to accommodate a helmet. Notice that the sleeves are short so that it won’t impede your ability to operate your weapon or other equipment. Finally, Tactical Concealment has bartacked a grid of 550 parachute cord along the hood, arms and back of the garment in order to add garnish and customize the Cobra for your own use.

To order yours, visit www.tacticalconcealment.com.

Tags: Crye Precision, Duro, Duro Textiles LLC, Multicam, Tactical Concealment Manufacturing Corp
Posted in Camo, Materials, Multicam | Comments Off on MultiCam Materials – Omega

MultiCam Materials – Alpha

Tuesday, May 1st, 2012

Every two weeks SSD showcases a different MultiCam print fabric from Duro Textiles LLC. This week, we are covering Alpha. MultiCam is a single camouflage pattern designed to hide the wearer in varied environments, seasons, elevations, and light conditions. After a great deal of commercial success and adoption by elements of US Special Operations Forces, in 2010 MultiCam was selected for use by the US Army as its Operation Enduring Freedom Camouflage Pattern (OCP).

Alpha is heavier than Duro’s 40D 2-way stretch fabric and is ideal for more rugged use. It owes its stretch to a makeup of 91% Nylon 9% Spandex. Additionally, the face is NanoSphere® treated to maintain a highly water resistant finish.

Finished Width – 54 inches cuttable
Download a test report here.

Crye Precision has just released their new G3 All Weather Combat Pants. They incorporate all of the features of the G3 line of combat clothing but with the addition of Duro’s Alpha fabric. Alpha’s excellent abrasion resistance as well as wind and water resistance makes them perfect for inclement weather applications.

Features include 10 pockets as well as accommodations for Crye’s patented removable AirFlex Combat Knee Pads. It incorporates a zip fly with Velcro closure and a low-profile adjustable waist feature. Berry Compliant.

Visit www.cryeprecision.com for information on their new All Weather Combat Shirt and Pants.

Tags: Crye Precision, Duro, Duro Textiles LLC, Multicam
Posted in Materials, Multicam | Comments Off on MultiCam Materials – Alpha

MultiCam Materials – 500D Cordura

Wednesday, April 18th, 2012

Every two weeks SSD showcases a different MultiCam print fabric from Duro Textiles LLC. This week, we are covering Beaver. MultiCam is a single camouflage pattern designed to help the wearer hide in varied environments, seasons, elevations, and light conditions. After a great deal of commercial success and adoption by elements of US Special Operations Forces, in 2010 MultiCam was selected for use by the US Army as its Operation Enduring Freedom Camouflage Pattern (OCP).

Duro prints on genuine Cordura fabric from Invista. A mid-weight fabric, 500D Cordura is rapidly becoming the industry standard for load carrying items that need to be light and durable. This material is coated on the back side for water resistance and features a face side finished with a durable water repellent.

Specs:
Finished Width – 60 inches cuttable
Finished Weight – 7.1 oz/yd² approximately
Fiber Content – 100% Nylon
Construction – 46/35 (warp/fill)
Breaking Strength – 453/348 (warp/fill) (lbs, minimum)

DOWNLOAD Test Report here.

Manufactured from 500D Cordura for its great balance of weight and durability, the new High Ground Plate Carrier incorporates several interesting features.

First off is the Mix-&-Match cummerbund with internal as well as external cummerbund PALS webbing. Additionally, the bungee system allows you to change out whole cummerbunds rather than reconfigure MOLLE pouches. The HGPC also incorporates a cable routing system to eliminate cable clutter. You can also ditch your plates one at a time without dropping the whole carrier kind of like in the first gen of BALCS carriers. Finally, it incorporates an internal pocket for flat items (or your hands) that is accessible from either armpit as well as internal breathable spacer cloth to assist with air flow.

Overall, the HGPC weighs only 2.5 lbs due in no small part to fabric selection. Please note, it is only available in MultiCam and Coyote.

Tags: Cordura, Duro Textiles LLC, High Ground, Invista
Posted in Armor, Materials | 3 Comments »

MultiCam Materials – LAMBDA NTS

Tuesday, April 3rd, 2012

Every two weeks SSD showcases a different MultiCam print fabric from Duro Textiles LLC. This week, we are covering LAMBDA NTS. MultiCam is a single camouflage pattern designed to help the wearer hide in varied environments, seasons, elevations, and light conditions. After a great deal of commercial success and adoption by elements of US Special Operations Forces, in 2010 MultiCam was selected for use by the US Army as its Operation Enduring Freedom Camouflage Pattern (OCP).

LAMBDA NTS is a high-performance, super smooth fabric designed for technical baselayers. In the past it has been used for cycling jerseys and running tights. It features a high spandex content that dramatically increases stretch and compression properties. Since it was designed for use as a baselayer, it also incorporates anti-microbial protection and moisture wicking properties.

Specs
Finished Width – 58 inches cuttable
Finished Weight – 3.75 oz/yd² approximately
Fiber Content – 92% Microfiber Polyester/8% Spandex

LAMBDA NTS was just released during SHOT Show and is so new that no one has picked it up yet but I think it’s going to make some great T-shirts. But that only makes sense as NTS stands for Next To Skin. I was able to check out a swatch at SHOT Show and it has a very cozy hand. It might also be incorporated as a stretch panel in other garments or perhaps as a torso section for a non-FR, fully printed combat shirt. I can’t wait to see how it’s used.

Tags: Crye Precision, Duro, Duro Textiles LLC, Multicam
Posted in Uncategorized | Comments Off on MultiCam Materials – LAMBDA NTS

MultiCam Materials – LiteLok

Tuesday, February 21st, 2012

LiteLok is the second focus of our ongoing bi-weekly series presented by Duro Textiles LLC on the various fabrics they offer in the MultiCam camouflage pattern. MultiCam is a single camouflage pattern designed to help the wearer hide in varied environments, seasons, elevations, and light conditions. After a great deal of commercial success and adoption by elements of US Special Operations Forces, in 2010 MultiCam was selected for use by the US Army as its Operation Enduring Freedom Camouflage Pattern (OCP).

Grey Ghost Gear uses LiteLok as one of the fabrics for their Lightweight Assault Pack. A simple, yet functional design it features a large main compartment as well as a side entry front pocket, modular webbing for attaching additional pouches and padded shoulder straps that stow away when not in use. The pack is already 30% lighter than comparable designs even before considering the weight savings of LiteLok. Additionally, the LiteLok provides a very good looking aesthetic with its visible ripstop weave.

Duro developed LiteLok fabric in conjunction with Glen Raven Technical Fabrics LLC. Weighing 30% less than traditional 500D nylon, Litelok exhibits excellent breaking strength and outstanding abrasion resistance performance. The double layer design is key to abrasion performance, while creating an ideal material for a lightweight backpack or vest.

Specs
Finished Width – 59 inches cuttable
Finished Weight – 5.4 oz/yd² approximately
Fiber Content – 100% nylon
Breaking Strength – 150/200 (warp/fill) (lbs, approximate)
Water Resistance – 127+ cm
Abrasion – may exceed 1300 cycles, H18 @500g

DOWNLOAD a LiteLok Test Report

Tags: Crye Precision, Duro Textiles LLC, Glen Raven Technical Fabrics LLC, Grey Ghost Gear, Multicam
Posted in Materials, Multicam | Comments Off on MultiCam Materials – LiteLok

MultiCam Materials – 1000D Cordura

Tuesday, February 7th, 2012

This is the first in a series of bi-weekly articles presented by Duro Textiles LLC on the various fabrics they offer in the MultiCam camouflage pattern. MultiCam is a single camouflage pattern designed to help the wearer hide in varied environments, seasons, elevations, and light conditions. After a great deal of commercial success and adoption by elements of US Special Operations Forces, in 2010 MultiCam was selected for use by the US Army as its Operation Enduring Freedom Camouflage Pattern (OCP).

Here you can see the US Army’s Medium Rucksack designed for use in Afghanistan. Designed to carry up to 60 pounds, the Medium Rucksack utilizes a special U-shaped frame that cradles the rear armor plate of an IOTV. The pack is produced as part of the MOLLE contact by both BAE Systems and ATK Eagle.

1000D Cordura is the most ubiquitous MultiCam fabric in use. It is also the heaviest MultiCam fabric. Due to its high abrasion resistance it has been adopted for use by the US Army for use in their MOLLE systems including packs and pouches. It is coated on the back side for water resistance and the the face features a a durable water repellent finish.

Specs:
Finished Width – 60 inches cuttable
Finished Weight – 9.8 oz/ydÂ² approximately
Fiber Content – 100% nylon
Construction – 35/30 (warp/fill)
Breaking Strength – 593/580 (warp/fill) (lbs, minimum)

Tags: Cordura, Crye Precision, Duro Textiles LLC, Multicam
Posted in Materials, Multicam | 5 Comments »

Duro Releasing New Fabrics at SHOT Show

Tuesday, January 17th, 2012

Duro Textiles is releasing two new fabrics at SHOT Show.

LAMBA NTS – This product is the ideal base layer fabric. Weighing 3.75oz/sy this micro-polyester spandex blend makes for a great long or short sleeve garment. With excellent wicking and anti-microbial properties, comfort will be optimal.

BEAVER – This great value nylon spandex soft-shell is ideal for an outerwear jacket. It is a 3-ply configuration that has a soft tricot lining layer, a water-proof breathable film and a durable stretch face fabric. This product weighs approximately 6.7oz/sy utilizes Schoeller’s Nanosphere technology on the face for the most durable stain and water repellency performance. Please note that you must be a Schoeller licensee in order to hang-tag and/or market the Nanosphere brand.

Stop by Crye Precision booth #8103/8107 to see them first hand. We’ll post some photos and our impressions once we get a chance to check them out ourselves.

www.multicamtextiles.com

Tags: Duro Textiles LLC
Posted in Materials, Multicam | 1 Comment »