Wilcox BOSS Xe

Archive for July, 2013

Combat Optics Tool from Patriot Products AZ

Wednesday, July 24th, 2013

1

While many carry a multitool on their person or have access to a full tool kit while at the range, no one has developed a specialized tool for use with Optics, until now. Lt Col Freddie Blish (USMC, Ret) developed the Combat Optic Tool which is manufactured by Patriot Products AZ. You might know Freddie from his time with Aimpoint or Larue Tactical, so you can be sure that he knows his way around optics.

According to TNVC, it has four immediately identifiable functions: Rounded Flathead Driver, Aimpoint Micro Series Adjuster, LaRue Tactical Tension Nut Wrench, and Bottle Opener (seen below).

8

tnvc.com/shop/combat-optic-tool

Kitanica Launches Backcountry Pants

Tuesday, July 23rd, 2013

20130723-121031.jpg

FEATURES:
• 2 Hip pockets
• 2 Rear pockets
• Knife pocket right side leg
• Riveted button waist with YKKTM metal fly zipper
• 7 belt loop, contoured waistband (size 30 has 5 loops)
• Dual waist adjusters
• Reinforced articulated knees
• Reinforced butt
• Bar-tacked stress points

MATERIALS- All American Made
• 6.5oz NYCO Ripstop
• Mil-Spec A-A-55301 nylon webbing
• All Seams Bonded-69 nylon thread

Offered in Khaki, sizes 30-42 with take up tabs on the waist with 34″ inseam. Yes, they are $99, but they are Made in USA!

www.kitanica.net/backcountry

BCM Puts Vickers Back In Black

Tuesday, July 23rd, 2013

20130723-120456.jpg

LAV on his new BCM carbine. Look for more on this amazing new rail soon.

Larry Vickers – My #1 BCM Carbine

My latest BCM training gun is ready to go; it features a pre production aluminum/magnesium key mod BCM rail that is extremely lite !!! Add that to a BCM 14.5 hammer forged pencil barrel with pinned BCM gunfighter combination flash hider and comp the overall effect is for a carbine that handles extremely well!!

Of course an Aimpoint Micro is present and needless to say my signature sling, in black, from Blue Force Gear

Back in Black !!!

– Larry Vickers

Corps Strength – Take It Running

Tuesday, July 23rd, 2013

Including this morning, I’ve been running now, in one way or the other, for about forty years. Running to train for football, boxing, track, adventure races, marathons and triathlons and of course for the Marine Corps, not to mention my present job as an instructor. The point being is I know a little something about running as a means of getting in, and staying in shape. Not everything by a long shot, but like most Marines I learned most of what I know the hard way, by my own mistakes and successes. One thing for sure is that while running in shorts, t-shirt and running shoes is a great conditioning method, its not the end all if you’re a first responder or in the military. In my book Corps Strength, I’ve spoken about training with weighted vests, and wearing boots to simulate the weight of the gear you have wear while doing your job. Another important aspect is conditioning your body (and mind) is to hand carry something while moving. Most military people have some experience with this: running while carrying your rifle is a boot camp standard, and First Responders need to condition themselves in the same way, as firemen (especially Wildland firefighters) have to hand carry gear when climbing hills, stairs, ladders, etc. SWAT guys carry weapons and gear, and EMT’s carry boxes of medical supplies, oxygen bottles, same concept for all.

rifle

A simple way to do this is to carry something that simulates what you have to carry on duty. A real weapon, or equipment isn’t always practical, and it’s sure to freak out the public if you decide to take a jog at the local park with your favorite AR at port arms. In fact, I can pretty much guarantee in today’s world you’ll have a cop up your butt in a hot minute if you do. Better just to avoid all this drama and carry something that gives you the same workout without the risk of getting shot or arrested. Here at the schoolhouse I talked my boss in laying out a few bucks (more than a few in fact) for a set of rubber training rifles for my students to PT with. They are the same exact size and weight of a M4, but are just blue rubber. To make it a better training tool, we tape a 3lb weight to the fore stock. It looks and handles like a real rifle, but is harmless and the bright blue color cuts down on the 9/11 calls. Firemen can run with their “Halligan” bar (carefully). These are heavy and its something firemen have access to, or you could use a heavy piece of rebar, a sledge hammer or a length of heavy pipe. If you want to get fancy you can buy one of the “Fitness Bars” that I see in gyms now a days. They have the advantage that you can buy the exact weight you want, (10 lbs is about right). In any case the addition of hand carrying this extra weight is sure to make any training run (long and slow, or short and fast) tougher, and your conditioning more realistic. Try it. Be Safe and Good luck.

MGunz

Prototype Molon Labe Knife from RMJ Tactical

Tuesday, July 23rd, 2013

20130722-220526.jpg

This is a Prototype Molon Labe Knife from RMJ Tactical. Look for the premiere at The Gathering.

20130722-220616.jpg

That should give you a good idea of scale.

20130722-221027.jpg

Here is a shot of the blade detail.

www.rmjtactical.com

GFG Side Charging Handle

Tuesday, July 23rd, 2013

The Side Charging Handle from Gun Fighter Gear is referred to as the first drop-in side charger for the AR15. It replaces a standard, mil-spec charging handle and offers an arm that projects down the left side of the upper receiver topped off with a knob. You simply pull back on the knob and charge the weapon. It’s new and different. I’m not gonna lie, somebody is going to try and break this thing off, just because they can, and then dance around triumphantly proclaiming, “See, it doesn’t work!”

The body is CNC machined from 7075 billet aerospace grade aluminum combined with internal parts CNC machined from steel. The side knob is knurled for purchase, even when wet.

www.gfgear.com/charging-handles/ar-15/gfg-side-charger

Dutch Camo Update

Tuesday, July 23rd, 2013

Last week in the village of Steenwijk, the Dutch joint Soldier Systems Knowledge Centre (joint kenniscentrum militair & uitrusting) presented a display of some of the latest camouflage work.

On display was an entirely new pattern which is intended for all personal equipment, regardless of the uniform being worn (NFP-woodland or NFP-tan) like the OCIE pattern of the US Army Camouflage Improvement Effort. The pattern is still awaiting final approval from the Commander of the Dutch Forces with fielding commencing around 2014/2015. This should also include a new set of equipment with a plate carrier as a base, instead of the cureent issue ops vest.

Dutch 1

Of particular interest was a trial uniform in Dutch DPM being worn by one of the Centre’s officers. It offers a different cut and pocket layout.

Dutch 2

Follow Us on Instagram

Tuesday, July 23rd, 2013

If you aren’t following Soldier Systems Daily on Instagram, you aren’t getting the full experience. We use Instagram to share photos of where we are and what we are doing. It might be something that isn’t worth a full article or the content might not be quite right for the site. Additionally, we attend numerous trade shows and industry events throughout the year and something may catch the eye that we want to share with you. Generally, these images won’t make it to the website or even Facebook.

If you haven’t been sharing our Instagram experience, then here are a few random images that you have missed.

They say a picture is worth a thousand words. Don’t miss out. Follow us on Instagram and join the conversation.

instagram.com/solsys