SIG SAUER - Never Settle

Archive for 2013

ExplosiveOps Gear – LPU Pouch

Monday, October 21st, 2013

LPU Pouch

ExplosiveOps Gear’s Low Profile Utility (LPU) pouch was designed for SOF, EOD, and breachers. Its design allows the operator to quickly access explosives or initiators with either hand without the bulk of most pouches. The ambidextrous design makes the LPU ideal for applications incluing SSE or HME Kits, small jackets, gloves, and PUC hoods. Multiple grommets allow water to drain from the pouch. Made from 1000D Cordura nylon.

The LPU is available with various mounting backs: MOLLE, 2″ belt mount, and Velcro hook.

The LPU is available in the following colors: MultiCam, OD Green, Coyote Tan, Earth Brown, and Black.

Made in the USA with a lifetime guarantee.

www.explosiveopsgear.com/catalog/item/6961682/8864315.htm

Angel 7 Industries – ASH-21 / ASH-22 M.C.S. BIORMR Helmet Suspension Systems

Monday, October 21st, 2013

Angel 7 Industries is debuting their newest series of suspension and padding systems entitled BIORMR: the ASH-21 and ASH-22 M.C.S. These two new systems were invented, designed, and engineered by Kerry Harris, Innovator of the Year under A7 Helmet Systems, LLC.

DSC_9239_Medium

Specs for the ASH-21 BIORMR combat helmet suspension and padding system:

  • Exceeds 14ft/sec as tested by Chesapeake labs
  • one piece
  • The helmet’s weight is evenly distributed over the entire head–no pressure points or hot spots
  • No less than 3 pads engage an operators head during an impact: top=5, sides=3, back=4, front 4.
  • The disks are individually adjustable to accommodate various head shapes and for individual comfort
  • Outstanding airflow and heat dissipation
  • Utilized Dynamic Suspension Technology or D.S.T. (Patented technology that allows the pad to be thicker without requiring the operator to move up in helmet size).
  • Black or Multicam fabric covering that wicks away moisture, has a low IR signature, and is antimicrobial
  • Fits all helmet geometries.
  • U.S. Patents and Patents pending
  • DSC_9254_Medium

    Specs for the ASH-22 BIORMR M.C.S. (Multi Configurable System):

  • Exceeds the performance of any other system ever created. Average at 14 feet per second, hot cold and ambient is 126.5g
  • One piece
  • Fits all helmet shapes and geometries
  • Multiple Configurations: All Pads can individually extend, retract, and rotate to accommodate individual head shapes and for individual comfort
  • U.S. Patents and Patents Pending.

  • www.angel7industries.com/

    www.a7helmetsystems.com/

    Remington Defense | ADS TV | AUSA Expo 2013

    Monday, October 21st, 2013

    Phil Strader and Robby Johnson from Remington Defense talk with ADS TV about the Remington ACR and Remington PSR.

    Visit ADS for more information.

    AUSA – Revision

    Monday, October 21st, 2013

    20131021-142947.jpg

    We stopped by Revision and they showed us a couple of technologies that they are adapting for use in USSOCOM’s TALOS (Tactical Assault Lightweight Operator Suit) program. The Prowler was developed with Canadian firm B-tema and serves as a lower extremity enhancement exoskeleton. Revision is also working to offer armor panels for the Prowler that will protect the legs and in particular the femoral artery from threats.

    “Revision is committed to developing next generation Soldier protection. Two key technology programs that were launched at AUSA this year are the ‘Advanced Head Protection System (AHPS),’ and the ‘Prowler Human Augmentation,’ system.

    The AHPS is a rifle round stopping helmet, with full maxillo facial protection, integrated electronics, integrated heads up display to Android, and pneumatic liner system that meets the new 14.1 fps impact requirement. The AHPS was developed in concert with the US Army Labs Natick.

    The Prowler, is Revision’s Human Augmentation device. It increases a soldiers metabolic reserve while preventing short and long term injuries. The Prowler allows our soldiers to be more lethal on the objective while increasing deployability through reduced injury. The Prowler, has been tested by SOCOM and CANSOFCOM, and is under contract with the US Army Labs Natick. Shown to provide a 33% mechanical advantage, the Prowler proves to be the next human augmentation system.

    Both systems are continuing to be innovated in support of several DoD and international programs as well as SOCOM’s TALOS program.”

    Revision also showed us their .30 protective helmet solution that was originally developed for the US Army but is being adapted to the TALOS requirement. The Advanced Head Protection System will incorporate a .30 protective mandible and visor as well as the pneumatic, adjustable padding system and dual ratchet-style adjustment already available from Revision.

    20131021-143351.jpg

    www.RevisionMilitary.com

    DRIFIRE | ADS TV | AUSA Expo 2013

    Monday, October 21st, 2013

    Shawn Connor from Drifire stops by to talk with ADS TV about the Crye / Drifire Combat Ensemble. A collaboration of the Crye Precision uniform and Drifire FR Materials.

    Visit ADS for more information.

    Outdoor Research | ADS TV | AUSA Expo 2013

    Monday, October 21st, 2013

    Mike Christian from Outdoor Research stops by to talk with ADS TV about some of their newest US-Made, Berry Complaint gloves. First is the Overlord Sensor Glove with touch screen technology built in to the leather. He also talks about the Firemark FR Glove & the Gost Ring soft leather glove.

    Visit ADS for more information.

    AUSA – Rocky

    Monday, October 21st, 2013

    20131021-141703.jpg

    The Rocky C5C is the next step in their lightweight series of boots. Designed for limited duration ops, the C5C is also meant for training, competitions and PT. The biggest difference between the new model and its C4T forebear is the sole.

    20131021-142107.jpg

    As you can see it’s quite aggressive with the tread extending up the heel counter as well as toe.

    20131021-142244.jpg

    Additionally, the vamp is now leather so as to eliminate any doubt that these are AR 670-1 compliant. The C5C also Incorporates a metallic mesh venting system as found on the C4T.

    www.RockyBoots.com

    AUSA – Simunition

    Monday, October 21st, 2013

    20131021-140859.jpg

    Simunition is offering a vismod 5.56mm upper receiver for AR-style weapons that replicates the look of an AK rifle. This allows your OPFOR to utilize Simunition marking rounds for force-on-force training.

    simunition.com