It’s bring head on the 5th floor of the convention center.
Archive for January, 2019
SHOT Show 19 – Arc’teryx LEAF Atom LT Gen 2
Wednesday, January 23rd, 2019
During a recent visit to Arc’teryx HQ in Vancouver, BC, I discussed several new products with Fred Norton, including the Atom LT Gen.
The Gen 2 update offers a new silhouette as well as materials resulting in an improved fit and more breathable garment when you’re active.
New Features:
• Trimmer fit hood with updated design
• Moved from an internal chest pocket to an external left chest pocket for securing carriage of mission essential items.
• Updated the media port management system. Creating routing of communications cables on either side of the jacket now.
Other Features:
• Insulated Hood – allowing the option to use a hood when/if reqd.
• Full Zip Closure (w/No Slip Zip™) – prevents zipper from self-opening at collar
• Hand Zip Pockets (w/media ports in both) – allowing for convenience and the secure carriage of mission essential items
• Drawcord Hem Closure – vertically routed drawcord with enclosure mitigates snags and hang-ups
The ATOM LT ( Gen 2) line consists of Hoody, Jacket, Vest and Pants. It is offered in Black, Crocodile, Wolf Grey, and Ranger Green, sizes XS, S, M, L, XL, XXL.
Available soon from leaf.arcteryx.com as well as your favorite LEAF dealer.
SHOT Show 19 – More Details On SIG’s New 338 Norma Mag Machine Gun
Wednesday, January 23rd, 2019The SIG SL MAG in 338 NM continues to impress. We got a few minutes to check a few of the features we mentioned in our initial article as well as some others. For example, it was designed specifically for use with a direct thread Suppressor. Additionally, SIG has developed an optic specifically for use with this and other weapons.
If you’re a machine gunner, you’re going to appreciate the adaptability of the feed mechanism and cover.
There are both top open and side open feed tray covers. This means the optic stays put.
Additionally, feed can be converted from left to right.
The SL MAG also does not require the gunner to open the feed tray to add a new belt. Simply insert the belt into the feed tray cover.
You’ll also notice an optic, mounted to the Picatinny Rail along the top of the receiver.
It’s based on the same technology developed for SIG Optics’ Ballistic Data Xchange or BDX family of optics for hunting.
However, rather than a separate, stand-alone Laser Range Finder, this optic features an integrated LRF in addition to Applied Ballistics software to offer a disturbed reticle as well as distance and azimuth to target on the screen.
This optic will also be featured on the SIG Next Generation Squad Automatic Rifle PON currently underway and could be used with any existing crew served or individual weapon. Additionally, it can be used in conjunction with a magnifier for long distance shots. SIG even mentioned offering a variable power magnifier for use with this smart optic.
Announcing Black Collar Arms
Wednesday, January 23rd, 2019
New company launches Pork Sword and Scorpitrol®
Austin, TX (January 22, 2019) — Whether you’re blue collar or white collar, if you’re pro-Second Amendment you’re black collar.
We’re Black Collar Arms and we’re here to bring innovative and functional firearms products to market at a fair price. Black Collar’s founders have backgrounds in product design and development and extensive firearm experience. Our engineers are former and current competitive shooters in various disciplines with engineering degrees from MIT and other snooty, prestigious places they’d love to tell you all about.
As you may have noticed from some of our product names and our marketing, we like to have fun and we don’t take ourselves too seriously. What we do take extremely seriously is our customers and the quality and functionality of our products.
Black Collar Arms is located in Central Texas and is committed to manufacturing our components in the U.S. from U.S.-made raw materials and components.
Contact us any time at manservant@blackcollararms.com, visit us at www.BlackCollarArms.com, and find us on Instagram at @blackcollararms.
Announcing the Pork Sword Chassis
Weighing in at a scant 14.7 ounces, the Black Collar Arms Pork Sword is a minimalist, modular chassis compatible with left- or right-handed Remington 700 footprint short actions.
With a rear Picatinny rail, build yourself a pistol with a brace like the SB Tactical FS1913 or dust off that old R700 rifle and start a new, shoulder stock-equipped project today!
Ideal for hog hunting, general truck gun use, or just finding some fun on the shooting range, a Pork Sword Pistol suppresses wonderfully and puts rifle accuracy and capability in an extremely compact package.
Whether it’s the handy size, the additional handgun hunting seasons in some states, the ability to keep it loaded in a vehicle (hunting-related restrictions on loaded rifles don’t apply), the simplified ownership in some states as compared to a semi-auto pistol or rifle, how great of a suppressor host it is, or simply the cool and fun factor, a bolt-action pistol makes all sorts of sense.
The Black Collar Arms Pork Sword:
• 7075 Aluminum
• Type III Hard Coat Anodized as standard (Cerakote options available)
• Accepts most AR-15 pistol grips
• Accepts any M1913 Picatinny rail-compatible pistol stabilizing brace or shoulder stock
• Accepts AICS pattern, single-stack magazines
• Ambidextrous QD sling sockets front and rear
• Two front Picatinny rails for barrier stop, bipod, angled or vertical forward grip, and/or Black Collar Arms FARend or handguard adapter (2nd front Pic rail not seen on these prototypes)
• Uses standard, 1-inch AR-15 grip screws for the front and rear action screws and the grip (duh)
• 100% designed and manufactured in Texas from domestic aluminum
• MSRP: $299.99
Coming soon from Black Collar Arms for the Pork Sword:
• FARend — The Pork Sword Chassis’ integral front Pic rail is a bit close for a bipod. Mount it out farther with our FARend. That’s Forward Accessory Rod. Then the word “end” so it sounds like forend. Anyway, the FARend’s M-LOK® slots allow you to mount a bipod, angled or vertical forward grip, and/or barrier stop(s) out in front of the Pork Sword Chassis, all nice and close to the bore. A lightweight, minimalist, and simple solution for extending accessories up to a foot farther out front. The production version will be quick detach. (ETA late Q1, early Q2)
• Handguards — yes, yes, we’re finalizing the design on those, too. (ETA Q2)
• Stock Options — lightweight, M1913 Picatinny rail-compatible, folding stocks from Black Collar Arms are coming! These will have a typical length of pull for a rifle. Our Preferred Stock Option will have an adjustable cheek rest and butt pad. (ETA late Q1, early Q2)
• Black Collar Arms’ own custom pistol action (ETA mid-late Q2, maybe early Q3). Once ready, we will be submitting this to California’s Roster of Handguns Certified for Sale so it’s an easy purchase for our customers who aren’t lucky enough to live in the U.S. of A.
• Chassis for other firearms, from Ruger 10/22 to…well…we aren’t spilling the beans quite yet but other fits are coming very soon! Sign up for our email notifications to be…well…notified.
Please visit www.BlackCollarArms.com for more photos and lots more information, including ballistic data from our 10-inch .308 Winchester example builds.
Announcing Scorpitrol®
Do you suffer from a heavy, gritty sensation in your trigger finger while shooting your CZ Scorpion EVO? If so, ask your doctor about Scorpitrol®! It’s the cure for that squeaky 9-lb factory pull and will have you enjoying a truly excellent 4.5-lb, 2-stage pull with a crisp, clean break and a short reset in only one application.
Realistically Scorpitrol® is a much better trigger than a little PDW like the Scorpion needs, but man oh man is it enjoyable to shoot!
Drop-In Scorpitrol® contains the same internal components as our Component Scorpitrol® (coming soon), but our staff of highly-trained rhesus monkeys has gone ahead and installed everything inside of a factory CZ trigger housing. It’s ready to drop straight into your Scorpion EVO!
• Maintains full-power hammer spring for reliability even with NATO-spec or cheap ammo
• Wire EDM cut hardened S7 tool steel hammer
• Wire EDM cut hardened A2 tool steel sear and disconnector
• Hammer, sear, and disconnector are polished and nickel boron treated
• aluminum inner chassis
• 2-stage trigger pull
• clean break with short, crisp reset
• 4.5-lb pull
• MSRP: $199.99
Please visit www.BlackCollarArms.com to sign up for our email notifications when new products are released — there’s a lot in the works! — and existing products are in stock.
Oh! Please go to Urban Dictionary and “thumbs up” our definition for black collar. It’s currently #8 — relegated to the second page of results. Let’s fix that!
Come See SureFire At SHOT Show 2019
Wednesday, January 23rd, 2019
SureFire is debuting brand new WeaponLights and handheld lights for the first time at the show! In addition to illumination tools, the SureFire Suppressors & Weapons Division will be launching brand new products at the show. To see the best in illumination tools, suppressors, and tactical products, stop by the SureFire booth (#13968), located on the second level of the main hall of the Sands Expo Center during the 2019 NSSF SHOT Show, January 22–25.
S&S Precision – NAVBOARD FLIPLITE
Wednesday, January 23rd, 2019New NAVBOARD ZIPFLIP™ converts to the NAVBOARD™ FLIPLITE™
The new S&S Precision NavBoard™ ZipFlip™ converts into the new FlipLite™ and allows the operator to have a lower profile configuration. The FlipLite™ is available separately or comes included with the ZipFlip™.
Since its introduction, the NavBoard™ Series has grown to reflect a diversity of missions and user preferences found across the SOF community. In 2017, we added the NavBoard™ FlipMod™, bringing even more options and greater security to an industry proven product line. We have also added ZipFlip™, FlipLite™, and the Rotary to the NavBoard™ Series, which bring additional capability to the end user. Whether navigating through the air, mounted or dismounted, we have a NavBoard™ platform to meet your specific operational needs.
Check out the complete new collection at www.sspgear.com
Original SWAT – Alpha Series – Where Tactical Meets Poweful
Wednesday, January 23rd, 2019MORRISTOWN, TN – Original Footwear, the leading value-minded tactical footwear manufacturer, is proud to deliver designed and engineered for the next generation elite operators and service professionals – the Alpha Series.
Alpha Fury boots are not your typical line of tactical boots. These boots are equipped with a lightweight, dual density EVA midsole with shock absorption zone for fatigue control.
With the comfort and flexibility of an athletic shoe, the boot still maintains the tried and true reliability and functionality of a diligent tactical boot. Another key element of the Alpha series is our custom molded thermoplastic heel counter and toe box. This helps provide immediate ease and protection. This offers 3 different styles: The Alpha Fury 6-inch, The Alpha Fury 8-inch, and the Alpha Fury 8-inch side zip.
“We are so thrilled to be offering a new series like none before,” said Kevin Cole, Original S.W.A.T. CEO and product developer. “No competing product comes close in terms of features, agility and price. The Alpha boots are built for comfort and performance first. We removed the stitch construction in the forefoot to give you one of the lightest boots on the market while still retaining our known tactical boot protection.
Alpha Fury 6”
• Slip resistant outsole
• EVA midsole molded with nylon shank for superior support
• Quick drying polyester mesh and microfiber PU upper
• No stitch construction in forefoot area to create lightweight and flexibility
• Airport friendly construction
• Rapid-lace system for a faster, more snug fit
• Lightweight molded dual density EVA midsole with shock absorption zone for fatigue control
• Gusseted tongue to keep dirt and debris out
• Custom-molded thermoplastic heel counter and toe box for instant comfort and protection
Alpha Fury 8”
• Slip resistant rubber outsole
• EVA midsole molded with nylon shank for superior support
• Quick drying polyester mesh and microfiber PU upper
• No stitch construction in forefoot area to create lightweight and flexibility
• Airport friendly construction
• Rapid-lace system for a faster, more snug fit
• Lightweight molded dual density EVA midsole with shock absorption zone for fatigue control
• Gusseted tongue to keep dirt and debris out
• Custom-molded thermoplastic heel counter and toe box for instant comfort and protection
Alpha Fury 8” Side-Zip
• Slip resistant rubber outsole
• EVA midsole molded with nylon shank for superior support
• Quick drying polyester mesh and microfiber PU upper
• No stitch construction in forefoot area to create lightweight and flexibility
• Airport friendly construction
• Rapid-lace system for a faster, more snug fit
• Lightweight molded dual density EVA midsole with shock absorption zone for fatigue control
• Gusseted tongue to keep dirt and debris out
• Custom-molded thermoplastic heel counter and toe box for instant comfort and protection
SHOT Show 19 – SureFire 40th Anniversary Display
Wednesday, January 23rd, 2019SureFire is celebrating their 40th Anniversary and one of the ways they are sharing their heritage is with a manikin display depicting how their products have been used over the years. The display has many original artifacts, borrowed from the men who were there as well as Independent Studio Services.
From left to right you’ll see an LAPD Police Officer c Mid-1980s with a Model 87S Shotgun Laser Sight, LAPD Metro SWAT Team Member c 1996 with an MO5 Weaponlight Forend, US SOF Assaulter c 1993 with SureFire 6P mounted to weapon, US SOF Advanced Force Operations c 2001 with SureFire 6P mounted to weapon, and USASOC Assaulter c 2019 with SureFire Scout Light and Suppressor.
