SIG SAUER - Never Settle

Kitanica – Lightweight Vented Shirts

October 30th, 2015

Screenshot (79)

Kitanica’s Lightweight Vented Shirt is available in both Short and Long Sleeve. They are constructed of 4.5 oz. polycotton ripstop, with antimicrobial moisture managing A.M.Y/Sorbtek mesh. The Lightweight Vented Shirt also features left and right angled and pleated front chest pockets, with the left pocket featuring pen tubes. Available in Black and Khaki.

Features

  • Lightweight 4.5 oz Poly/Cotton Ripstop
  • Antimicrobial moisture managing A.M.Y/Sorbtek Mesh
  • Mesh vent behind the arm and gussetted back
  • Left and right angled and pleated front chest pockets
  • Pen tubes on the left pocket
  • Double layer reinforced in elbows
  • Gussetted back for full range motion
  • Bar-tacked at the stress points and has double needle top-stiching
  • Made in the USA
  • Long Sleeve – www.kitanica.net/LWV-LONG-SLEEVE-SHIRT-p/034

    Short Sleeve – www.kitanica.net/LWV-SHORT-SLEEVE-SHIRT-p/035

    U.S. Elite Gear – ‘Time To Gear Up’ Giveaway

    October 30th, 2015

    US Elite

    U.S. Elite is running a “Time to Gear Up” Giveaway from now until Nov. 12. The chosen winner will receive a prize pack consisting of: an Arc’teryx LEAF Atom LT Hoody, a Suunto Core Watch, and a Limited Edition U.S. Elite Can O’WhoopAss. Click the image above or the link below to enter.

    www.us-elitegear.com/giveaway

    Senator John McCain On The Army Modular Handgun System Program

    October 30th, 2015

    Screenshot (84)

    Click to view .pdf

    Arizona Senator John McCain issued a five page report on the ongoing US Army Modular Handgun System selection, criticizing key points of the ongoing program. The report starts by establishing that the US Army is no stranger to expensive and ultimately ineffective weapon systems programs, and then goes on to detail what he feels are key errors in the ongoing handgun selection program, including:

  • An overly complicated 350 page requirements document, which among its contents specifies extraneous details such the size of the handgun’s exterior packaging and that “paper used for correspondence” must use “1” margins”.
  • The lack of a caliber study and unified caliber choice, and the lack of focus on caliber studies already conducted by entities such as the FBI and U.S. Special Operations Command, instead conducting “an open caliber competition” among vendors.
  • Conducing the Modular Handgun System in lieu of allowing for the selection of handguns, ammunition, and accessories already approved by USSOCOM and JSOC.
  • Not allowing rank and file Soldiers the opportunity to test and provide feedback on the handguns.
  • Senator McCain’s report is relatively brief, yet does a good job of touching on all the ongoing issues with the current Modular Handgun System program. I’ve got to say, I agree with much of Senator McCain’s criticisms. However, while I agree that the Army should just adopt a pistol already in the system, placing the decision on which one to use on a Brigade commander, is not the best course of action.

    It’s worth a read. You can check it out by clicking the image above.

    Sneak Peek – Gen 7 CAT by North American Rescue

    October 30th, 2015

    Coming soon!

      

    www.narescue.com

    Triple Aught Design – FAST Pack EDC

    October 30th, 2015

    IMG_4372

    This is the latest generation of Triple Aught Design’s FAST Pack EDC. Although the overall appearance is similar to the previous version, the pack has been re-engineered from the ground up, based on customer feedback and testing. The FAST platform is designed around rugged construction and modular adaptability, and the FAST Pack EDC perfectly embodies this concept. The FAST Pack is made of durable 1000D and 500D Invista Cordura Fabric, and features PALS webbing and internal anchor points throughout to allow for optimal end-user configuration. The FAST Pack EDC also features a weather-resistant secondary compartment which is optimal for critical electronics and documents, which is accessible through a secure roll-top closure.

    We’re going to run it through its paces over the next few weeks and give you our impressions.

    Material

  • 1000 and 500 Denier Invista Cordura Fabric
  • Evazote Closed Cell Cross-Linked Ethylene Copolymer Foam
  • DRI-LEX Aerospacer Moisture Management Mesh
  • Hypalon Synthetic Rubber Reinforcements
  • HDPE Frame Sheet
  • Velcro Front Panel for Morale Patches or Unit Identification
  • Elastic Retainer Straps
  • Dimensions

    Volume: 2000.00 cu in (32.77 liters)
    12.00″ (30.48 cm) W x 21.00″ (53.34 cm) H x 8.00″ (21.59 cm) D

    Weight: 72.00 oz (2.04 kg)

    store.tripleaughtdesign.com/FAST-Pack-EDC

    SilencerCo Summit Collection – Noveske Rifleworks

    October 29th, 2015

    SilencerCo + Noveske

    SilencerCo is continuing with their Summit Collection firearms, with their first ever AR-15 offering. Made in collaboration with Noveske Rifleworks, this rifle is chambered for .300 BLK with an 8″ barrel, and a color-matched, Summit-edition Omega suppressor. Only 30 units have been produced, in two color options: 25 Grey and 5 Green.

    Features

  • Noveske Gen III 8” 300 BLK Rifle
  • SilencerCo Omega – Color-Matched to Rifle
  • Omega Specifications: 7.62 Flat Front Cap & 5 x 24 Direct Thread Mount
  • AXTS Raptor Charging Handle
  • SD-3G Geissele Trigger
  • Magpul MOE SL Stock
  • Magpul MOE K2 Grip
  • Magpul MBUS Pro Sights
  • Noveske “Johnny Edition” Magpul PMAG 30
  • Matching Noveske + SilencerCo Engraving
  • Packaged in Pelican IM2600 with Custom Cut, High-Density Foam
  • silencercosummit.com/noveske

    Magpul – Now Shipping PMAG 30 AK/AKM GEN M3

    October 29th, 2015

    MAGPUL AK M3

    Magpul is now shipping the PMAG 30 AK/AKM GEN M3 polymer magazine for Kalashnikov-pattern rifles chambered for 7.62x39mm. These new magazines feature steel-reinforced locking lugs, a removable floorplate, constant curve geometry, and a high-reliability/low-friction follower. The PMAG 30 AK/AKM GEN M3 counts as three US compliance parts for 922r. Made in U.S.A.

    Features

  • Impact and crush resistant polymer body
  • Stainless steel rear locking lug and reinforced front lug and spine for increased durability
  • Constant-curve internal geometry for smooth feeding
  • Anti-tilt, self-lubricating follower for increased reliability
  • Long life stainless steel spring
  • Ribbed gripping surface and aggressive front and rear texture for positive magazine handling
  • Paint pen dot matrix panels on the bottom of the body to allow for identification marking
  • Flared floorplate aids magazine handling and disassembly yet is slim enough for use with most pouches
  • www.magpul.com/products/pmag-30-ak-akm-gen-m3

    Gentex Features New HGU-56/P With Ops-Core Rails And Other Advances In Rotary Wing Helmet Systems At SAFE Symposium

    October 29th, 2015

    Gentex Features New HGU-56/P with Ops-Core Rails and other Advances in Rotary Wing Helmet Systems at SAFE Symposium

    Leveraging Gentex Corporation Brands to Deliver Innovative Technology for Unprecedented Safety and Protection for Aircrew

    Carbondale, PA, October 29, 2015. Gentex Corporation, a global leader in personal protection and situational awareness solutions for defense forces will demonstrate their industry leading lines of Gentex, ALPHA, and Ops-Core helmet systems for air applications at the SAFE Symposium, November 2 – 4, Orlando, Florida. Featured among them will be their latest innovations, the Gentex HGU-56/P Rotary Wing Helmet System with Ops-Core Accessory Rail Connectors (ARC), and the ALPHA 900 Search and Rescue (SAR) Helmet System, part of the ALPHA 900 Cross-Platform Helmet System line.

    Gentex has integrated the Ops-Core ARCs into the designs for the standard and improved HGU-56/P Helmet Systems. This pairing allows aircrew users to easily add mission-enhancing components such as cameras and illuminators, without compromising the helmet system’s industry leading protection.

    Combining the open architecture of the Ops-Core ARCs with the Gentex HGU-56/P Helmet System creates a platform for access to a broadest of capability upgrades to support both current and future operations. The ALPHA 900 SAR Helmet System is water resistant and optimized for air-to-sea search and rescue operations, and is compatible with all major aircraft ICS systems and portable radios.

    “The Gentex HGU-56/P with Ops-Core ARCs and the ALPHA 900 SAR Helmet System exemplify Gentex Corporation’s continued effort to expand our product line, allowing us to offer a full range of innovative solutions to the customer” said Robert McCay, vice president, Aircrew Systems, Gentex Corporation. “Gentex is dedicated to providing the most comprehensive portfolio of aircrew headborne systems and services to meet the needs of global aircrew personnel.”

    Adding to the depth of Gentex Corporation’s comprehensive product line featured at SAFE, is their newly acquired line of hearing and communications products, which will be on display in booth #302. The recent acquisition of Aegisound, an established provider of products that significantly improve hearing protection, safety and communications in high noise environments, expands Gentex’s hearing and communications product offering to global defense and industrial personnel, as well as the F-35 program portfolio. In addition to hearing and communication products, Gentex will supply eye protection, the helmet system platform, and respiratory protection system to the elite aircrew entrusted to command the F-35 Lightning II.

    Subject matter experts from the Gentex team have also been invited to give a presentation on the evolution of the aircrew industry’s needs over the last six decades, and how these needs drive the development of aircrew helmet systems and capability upgrades. The presentation which is titled, Past,

    Present and Future of Aircrew Helmets, will be held on Tuesday, November 3rd from 1:00 PM to 2:30 PM in Bonaire 1-2-3. Visit the Gentex Corporation booth #307 to see the tactical optics line; dazzle laser defense eyewear, a line of laser protective flight-helmet mounted visors and spectacles that help pilots combat emerging laser threats, as well as our line of respiratory and CBRN protection products. Two Helmet System briefings focusing on the design capabilities of helmets, oxygen masks, visors, microphones and laser eye protection will also be held during the symposium.

    www.gentexcorp.com