Wilcox BOSS Xe

Posts Tagged ‘Sig Sauer’

GAO Denies GLOCK Protest For US Army M17 Modular Handgun System Award To SIG SAUER

Tuesday, June 6th, 2017

Yesterday was the deadline for the Government Accoutability Office to issue a ruling on GLOCK’s protest of the US Army’s Modular Handgun System award to competitor SIG SAUER of February 24th. The GAO denied the protest, meaning the Army’s planned fielding of the M17/18 will move forward, starting with the 101st Air Assault Division at Fort Campbell, Kentucky, later this year.

Below is the GAO’s statement.

The following is a statement from Ralph O. White, Managing Associate General Counsel for Procurement Law at GAO, regarding today’s decision resolving the protest filed by Glock, Inc., of Smyrna, Georgia, B-414401, June 5, 2017.

On June 5, 2017, the U.S. Government Accountability Office (GAO) denied a protest filed by Glock, Inc., of Smyrna, Georgia, against the award of a contract by the Department of the Army to Sig Sauer, Inc., of Newington, New Hampshire. The solicitation, issued under request for proposals (RFP) No. W15QKN-15-R-0002, is for the procurement of a modular handgun system. The protester challenged the Army’s interpretation of the solicitation regarding the minimum number of contract awards required by the RFP. The protester also alleged that the Army improperly evaluated its proposal. The maximum contract value, including all options, is approximately $170 million.

GAO denied the challenge to the interpretation of the solicitation, finding that the RFP allowed the Army to make only one award, although up to three awards were permitted by the RFP’s terms. GAO also denied the challenge to the Army’s evaluation of Glock’s proposal on the basis that any errors did not prejudice Glock in the competition.

GAO’s decision expresses no view as to the merits of the protester’s proposal. Judgments about which offeror will most successfully meet the government’s needs are reserved for the procuring agencies, subject only to statutory and regulatory requirements, such as full and open competition, and fairness to potential offerors. GAO’s bid protest process is handled by GAO’s Office of General Counsel and examines whether procuring agencies have complied with procurement laws and regulations.

Today’s decision was issued under a protective order because the decision may contain proprietary and source selection sensitive information. GAO has directed counsel for the parties to promptly identify information that cannot be publicly released so that GAO can expeditiously prepare and release a public version of the decision. When the public version of the decision is available, it will be posted to our website, www.gao.gov.

SOFIC – 7.62 G2 DMR

Thursday, May 18th, 2017

SIG has introduced an updated version of the 716 G2 DMR refered to as the G2. 716 is an AR – style 7.62mm rifle with ambidextrous controls, two positions adjustable gas valve, 16″ hammer forge barrel and a short stroke gas piston system. Designated Marksman Rifle enhancements include a two stage match trigger and a 20 MOA top rail. Additionally, the 716 accepts SR25 magazines.

Much of the updates center around weight reduction bring it down to 8.7 lbs with magazine. For instance, the rifle incorporates a light weight KeyMod hand guard.

Offered in FDE and black.

www.sigsauer.com

SOFIC – SIG’s M17 & M18 Modular Handgun Update

Tuesday, May 16th, 2017

When we recently reported that the 101st Abn Div and other Fort Campbell, Kentucky-based tenant units would be the first units equipped with the US Army’s new Modular Handgun System, there seems to be confusion by commenters over which model of pistol units would receive. The 4.7″ barrel M17 is similar to the full size P320 and will be the standard pistol. The Compact M18 features a 3.9″ barrel and will replace the M11, known commercially as the SIG P228.

Above you can see precisely how the M17 will be shipped to the Army. Below, is the M18.

Each pistol comes with one 17 round and two 21 round magazines as well as three frames (small, medium and large). Unlike many pistols, the frames are not the firearm but rather expendable parts. The trigger pack is the serial numbered item. The difference between the M17 and M18 is the length of the barrels and slides.

Currently, the pistol features a anti-tamper device so Soldiers can’t swap out frames on their own.  However, the Army is considering removing this feature and replacing it with a standard commercial fastener.

An additional anti-tamper device prevents Soldiers from accessing the striker mechanism.

SIG introduced two additional safety features. There is a 1911-style ambi-safety as well as a loaded chamber indicator at top center of the breech on the slide. Finally, the slides have a removable sight plate with a Delta Point Pro footprint.

www.sigsauer.com

SIG SAUER Expands its 9mm FMJ Ammunition Offerings

Wednesday, May 10th, 2017

Newington, NH (May 9, 2017) – SIG SAUER, Inc. is pleased to announce the expansion of its 9mm full metal jacket (FMJ) Elite Performance Ammunition offerings with the addition of 124gr and 147gr bullet weights. With these new rounds, SIG customers now have three 9mm bullet weights – 115gr, 124gr and 147gr – available in both the V-Crown® jacketed hollow point (JHP) personal defense ammunition and the SIG FMJ target loads.

The perfect combination of affordability and performance, the SIG FMJ ball ammunition is designed to approximate the performance of the corresponding JHP loads, making a seamless transition from target ammo to carry ammo. The copper-coated lead bullets in the SIG FMJ ammunition were engineered to have the most precise, uniform profile, resulting in consistent accuracy.

“SIG FMJ ammunition is designed specifically for practice and competition shooting, and given the sheer popularity of the 9mm caliber, expanding the FMJ line to mirror the V-Crown offerings was an important next step,” said Dan Powers, President of the SIG SAUER Ammunition Division. “These premium target rounds feed as smoothly as our V-Crown JHP rounds and perform and feel almost identical to the V-Crown loads when shooting, making them ideal practice rounds.”

Manufactured to meet or exceed SAAMI specifications, the SIG FMJ centerfire pistol cartridges feature solid brass cases and durable copper jacketed bullets that stay with the lead at impact. Dependable primers and clean-burning powders are used for reduced barrel fouling and more reliable functioning. All SIG SAUER Elite Performance Ammunition is manufactured by SIG SAUER at its new ammunition manufacturing facility in Jacksonville, Arkansas to the same exacting standards as the company’s premium pistols and rifles. For more information, visit www.sigsauer.com/ammunition.

ATF Clarifies Ruling on Pistol Stabilizing Braces

Wednesday, April 26th, 2017

Newington, N.H. (April 25, 2017) – SIG SAUER, Inc. announced news of a welcomed clarification from the Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) on pistol stabilizing braces (PSB). The ATF’s refined position is that placing a PSB against the shoulder does not, in and of itself, necessarily alter the classification from pistol to short-barreled rifle (SBR).

In a letter dated March 21, 2017, ATF reexamines its earlier position, which stated that shouldering a PSB-equipped firearm could constitute the making of an unregistered short-barreled rifle under the National Firearms Act (NFA). ATF now states:

“With respect to stabilizing braces, ATF has concluded that attaching the brace to a handgun as a forearm brace does not ‘make’ a short-barreled firearm because … it is not intended to be and cannot comfortably be fired from the shoulder.” The letter continues: “Therefore, an NFA firearm has not necessarily been made when the device is not re-configured for use as a shoulder stock — even if the attached firearm happens to be fired from the shoulder.”

The following passage from the letter acknowledges the confusion surrounding the January 2015 “Open Letter on the Redesign of ‘Stabilizing Braces’”, and clarifies that ATF does not consider shouldering a PSB-equipped firearm, in and of itself, to render it an SBR.

“To the extent the January 2015 Open Letter implied or has been construed to hold that incidental, sporadic, or situational ‘use’ of an arm-brace (in its original approved configuration) equipped firearm from a firing position at or near the shoulder was sufficient to constitute a ‘redesign,’ such interpretations are incorrect and not consistent with ATF’s interpretation of the statute or the manner in which it has historically been enforced.”

Click here to read to read the ATF letter in its entirety.

SIG SAUER is pleased that ATF has clarified its prior position. To view the SIG SAUER selection of pistol braces and pistol-brace equipped firearms, go to sigsauer.com.

SIG SAUER Introduces SIG HT Hunting Ammunition in 308 Win

Monday, April 3rd, 2017

Newington, NH (April 3, 2017) – SIG SAUER, Inc. is pleased to expand its SIG HT hunting line of premium-grade rifle ammunition with the addition of 308 Win. Featuring an all-copper bullet that delivers deep penetration and maximum terminal ballistic performance, SIG HT ammunition is supremely accurate and ideal for hunting numerous species of game.

The 150gr 308 Win features a muzzle velocity of 2,900 fps and muzzle energy of 2,801 ft-lbs. This SIG HT 308 Win cartridge is excellent for mid-sized game such as deer, antelope, pigs and predators.

“SIG HT ammunition is extremely effective in the field, and our initial SIG HT offering in supersonic 300BLK has been in high demand because of its outstanding performance,” said Dan Powers, President of the SIG SAUER Ammunition Division. “Retailers and their customers are asking for additional calibers in this lead-free, all-copper hunting round, and we will continue to expand the line to meet even more hunters’ needs.”

SIG HT cartridges are made with premium nickel-plated shell cases, and flash-reduced propellant is used to minimize visible signature while shooting in low-light situations. Premium quality primers are also used to minimize variations in velocity.

All Elite Performance Ammunition is manufactured in the United States by SIG SAUER to the same exacting standards as the company’s premium pistols and rifles. For more information, visit www.sigammo.com.

Follow SIG SAUER on social media, including Facebook at www.facebook.com/sigsauerinc, Instagram at www.instagram.com/sigsauerinc, and YouTube at www.youtube.com/user/sigsauerinc.

Quantico Tactical Offering SEAL 50th Anniversary SIG MK25 Pistols

Tuesday, March 28th, 2017

These highly customized Sig Sauer MK25 pistols commemorate the 50th Anniversary of the US Navy SEALs.

Features:
• Custom, High Luster Finished Sig MK25 Pistol
• Meticulously Cut Scroll Work
• Engraved with Gold Inlay:
o “The Only Easy Day Was Yesterday” on Right Side of Slide
o “1962 – 50th Anniversary – 2012” on Left Side of Slide
• SEAL Emblem in Custom Hogue Grips
• Available Exclusively from Quantico Tactical while supplies last

Price: $975

These commemorative pistols are only available to active, reserve and retired SEALs and UDT Members who preceded the SEALs. Please note there is a eligibility verification process. Available via their website or in their stores.

Quantico Tactical manages the Commemorative Weapon Program for Sig Sauer and Smith and Wesson. Quantico is also the leading Military/LE Program weapon reseller for SIG, Smith & Wesson, FN, Beretta and IWI. To design a commemorative weapon or to organize a group buy for your unit, contact Quantico Tactical at www.quanticotactical.com/CommemorativeWeapons.

GLOCK Protests XM17 Modular Handgun System Award

Monday, February 27th, 2017

The Government Accounting Office’s protest docket has been updated with GLOCK, Inc’s February 24 protest to SIG SAUER’s January 20th award for the XM17 Modular Handgun System.

img_7810.jpg

The case remains open with a due date of 5 June, 2017. This means work cannot begin on the program until this protest is sorted out.