Wilcox BOSS Xe

Archive for November, 2010

Soldier Technology US Conference & Exhibition

Saturday, November 20th, 2010

Be sure to attend the Soldier Technology US Conference & Exhibition January 31st – 3 February 2011 in Crystal City, Virginia. Now, in its 4th year, Soldier Technology will host 48 military and government decision makers who have confirmed to deliver requirement and program briefs, and lessons learned including:

• Brigadier General Peter N Fuller, Program Executive Officer, PEO Soldier
• Lt General Micheal Vane, Director, US Army Capabilities Integration Center
• Colonel Wil Riggins, Project Manager, Soldier Warrior, PEO Soldier
• Brigadier General Jess Scarbrough, Program Executive Officer, Program Executive Office, Chemical Biological Defense
• Major General (ret’d) Robert Scales, Former Commandant, US Army War College

The conference features Lightening The Load and Situational Awareness Focus Days. Download the full agenda here.

In addition to the conference program, the exhibition will hold over 50 exhibitors from system integrators such as: Raytheon, Lockheed Martin and QinetiQ and innovative solutions providers including: eMagin, Schott and Ultra Electronics.

Soldier Systems readers are entitled to a 15% discount to attend the show – quote code: 12607.004_SSY_1 when registering. You can register here.

If you require further detailed information please call Saima Qureshi on +44 (0) 20 7368 9465 or email soldiertechnologyus@wbr.co.uk.

“Investigative” Reporting Strikes Again

Saturday, November 20th, 2010

If you remember the M203 debacle, you know my opinion of television-based investigative reporting isn’t that great. This week’s reporting by Seattle’s KING 5 takes the cake. Naturally, they only had the best intentions. Going into the first report all the elements of a great story were there. There was a victim and an evil Asian sweatshop who was working an behalf of big business. The truth however, is hardly the same.

So, before we get into this further, you need to go catch up on KING 5’s reporting so we are on some common ground.
Day 1
Day 2
I am not going to critique the KING 5 piece bit by bit since it is so bad. Instead, I am going to hit a few highlights.

Now that you have read and watched the reporting, I am sure that some of you with experience in this industry are already going, “oh crap”. For the rest of you, the reason that some are saying, “oh crap” is because almost everyone uses sub-contractors at one time or another and what’s more, many in the tactical sewing business use home sewers. So, before we go any further, a little on home sewing for those of you unfamiliar with the practice.

Home sewing is great for both worker and business. The sewer is paid by the piece and can be at home with the kids or a sick relative, working at their own pace and taking breaks as needed. If they are good, they can make a lot of money in a relatively short amount of time. Of course, with piece work as it is called, the inverse is that, if they can’t sew well, they don’t make much money. The reason home sewers don’t get paid by the hour is because they are unsupervised and there is no way to determine how much time they have actually worked. Home sewers are almost always contract (1099) employees.

So now that you know a little about home sewing, don’t you find the reporter’s shock over the sewer receiving 80 cents for an assembly piece a bit ridiculous? He acts as if she is being underpaid, but we have no idea how long it took her to make the piece. If it were say four minutes, she could make up to 15 an hour and net $12.00. But no, the KING 5 reporter made a big issue over the 80 cents and left the rest to our imagination, expecting us to imagine that this woman were receiving sweat shop wages.

Another issue from the reporting that struck me was the repeated insinuation that these products were somehow not American made. It reeks of racism to imply that because these products were made by Asians, some of whom do not have a great command of the English language that these products might as well be made off-shore.

Another issue here is sub-contractors. Almost every industry in America relies on them. Once it is established that the potential sub is in compliance with tax and labor laws the main concern goes to ensuring that the sub supplies a quality product. And that is where Tactical Tailor was with Haos Sewing.

Remember, Tactical Tailor is an advertiser on SSD but they wouldn’t be if they were the kind of company that KING 5 insinuated that they are on their news report. I wrote this piece because I am sick and tired of the press sensationalizing stories and filing reports about things that they don’t know anything about. Ultimately, anyone could have been the target of a report like this. Neither Tactical Tailor nor J.L. Darling (Rite in the Rain) deserve this kind of broad brush attempt at making them look like they are doing something wrong. During these trying economic times they are some of the few businesses in the area that are hiring folks. Tactical Tailor follows the law. They have to to keep their military contracts.

Based on this story, Tactical Tailor ended their contract with Haos Sewing for cause due to a contract violation, but I also want to point out that I have no idea if Haos Sewing is in violation of any law or ordinance. While there was a lot of implication in the news piece they just didn’t make that case.

KING 5 has already moved on to the next story, but the damage is done. The story began with concern for the victim, Huong Duong but KING 5 didn’t follow up with her. On the other hand, I spoke with Tactical Tailor Director Sales GW Ayers III and he said that they would be happy to offer Huong Duong a job at a full-time wage. Tactical Tailor said this to KING 5 as well, but that fact didn’t make the story. I wonder why.

-The Editor

Battle Bears Are Coming

Saturday, November 20th, 2010

We received this cryptic photo from S.O.Tech. Intrigued? We are.

Black Palm – ‘Nuff Said

Saturday, November 20th, 2010

Black Palm has updated their site and added new colors to their lineup. They are, quite simply, our favorite lifestyle T-shirt company. Combining innovative designs with high quality Tees, Black Palm sets the standard. What’s more, they have developed proprietary designs for several industry players. In fact, Grey Group was the first to carry them. Get yours today.

www.BlackPalm.net

The Arc’teryx Antaeus – SSD Exclusive

Friday, November 19th, 2010

Ten years ago, Arc’teryx developed the Improved Load Bearing Equipment (ILBE) pack for the Marine Corps. Based on their award winning Bora technology, ILBE was a monumental leap forward in load carrying capability for the military. Over the ensuing years not only did Arc’teryx continue to lead the way as a commercial pack innovator, but the Marines adapted how they fight and consequently, how they use load bearing systems. Loads changed radically including the adoption of armor vests with bulky armor plates as standard fair. In particular, rear plates play havoc with the balanced carrying of a load on the back. Unfortunately, ILBE was not updated, so early this year Arc’teryx took it upon themselves to create Anteaus ILBE as an internal project. Now in its fifth version, this pack, named the Antaeus is the most technically advanced military pack we have seen. Unlike ILBE it is not a modified civilian pack but rather leverages technologies developed for the commercial market, but applies them in ways more appropriate for a tactical pack. However, when you look at the Antaeus, you can see that it has a similar pedigree to the ILBE.

The portage handles are still there as well as the articulated waist belt. While they are improved, the Antaeus also features quick release sternum, should and waist straps. And, like ILBE Antaeus is a system. It is made up of three components that can be used alone of in concert with one another. The core of the system is the 3967 cu in main pack. Designed as a top loader it features a simple lid and lower side pockets designed for water bottles or other items requiring quick access. Additionally, the assault pack is a 2135 cu in beast that most will find sufficient for short duration missions. It can be attached piggy back style to the main pack or strapped down under the lid depending on the load configuration. Finally, a 730 cu in lid can be used as a waist pack or attached in a more traditional role on either the main or assault packs. It features multiple pockets in order to help compartmentalize items such as medical supplies or communications devices.

The differences are numerous as well. This pack has been designed specifically to accommodate someone wearing body armor with a rear plate. New foam has been integrated into the shoulder straps. Conventional wisdom would tell you that you don’t need padding if you are wearing an armor vest but unfortunately, a heavy pack with narrow shoulder straps still digs into the shoulder despite the layers of ballistic material. Arc’teryx has dealt with this by relying on dual density foam and a unique should strap shape which spreads the load across the shoulder. Additionally, the concave, non-slip back pad will stabilize the load so that it does not teeter on an armor plate yet still provides ample lumbar support for those not wearing armor. Also, a heavy-duty U shaped zipper facilitates easy access to sleeping gear or other bulky items located at the bottom of the main pack. This design reduces stress on the zipper and does not compromise the integrity of the pack’s ability to carry a load if the zipper fails. Finally, the pack is not slathered in PALS webbing but rather features limited amounts where additional load carrying capacity would be most effective. This helps mitigate both weight and cost.

While it appears that the Marine Corps is adopting an externally framed pack similar the Army-issue MOLLE, Arc’teryx plans on continuing refinement of the Antaeus for those that require an internal frame military pack. The Arc’teryx LEAF (Law Enforcement Armed Forces) program is also developing an entire new family of packs based on the latest in commercial pack technology. They will be unlike anything you have ever seen.

LEAF.Arcteryx.com

BG Peter Fuller Nominated for Second Star

Friday, November 19th, 2010

Congratulations to BG Peter N. Fuller, Program Executive Officer Soldier who has been nominated for appointment to the rank of Major General.

Breaking News – Australians to Adopt MultiCam for Use in Afghanistan

Friday, November 19th, 2010

In a shocking decision, the Australian military announced today that they are going to conduct an extended wear trial of the MultiCam pattern for troops serving in Afghanistan. Like in the US and UK, Australian Special Operations Forces have long used MultiCam due to its increased effectiveness. Following their lead, Minister for Defence Materiel Jason Clare announced the change to the new pattern today at the biannual Land Warfare Conference in Brisbane. By “change” we mean the extension of the SF wear trial that has been going on for years.

“Special Forces soldiers have said this is the uniform they want to wear,” Mr Clare said. “The camouflage pattern provides troops with greater levels of concealment across the range of terrains in Afghanistan – urban, desert and green. It also makes it easier for our troops to do their job.”

The plan calls for all Australian troops going ‘Outside the Wire’ will be outfitted in MultiCam. What is really interesting is that Mr Clare discussed issuing the same uniforms used by his SOF which are the Crye Precision combat uniforms rather than the standard DPCU in a different camo pattern. However, he also stated that “I have also instructed the Defence Materiel Organisation to pursue the purchase of a licence to provide for the potential manufacture of this uniform in Australia if the extended trial is successful,” Mr Clare said. Could this be the groundwork for an Australian MTPesque creation?

Furthermore, does this initiative mean the demise of the short lived Disruptive Pattern Midpoint Uniform unveiled earlier this year? The whole point of the DPMU was to alter the DPCU’s pattern slightly to be more effective in Afghanistan. Designed by the Defence Science and Technology Organisation (DSTO), it combined the colors of the two uniforms the Australian Army currently uses.

SureFire Wins USSOCOM VBL-H & VBL-III Contracts

Thursday, November 18th, 2010

Early this year, Naval Surface Warfare Center – Crane released a solicitation for a new generation of Very Bright Lights. Several companies answered the call and Crane has awarded contracts to SureFire for their HellFighter, M620V Scout Light®, and the M720V RAIDâ„¢ that we wrote about at SHOT Show 2010. Two types of Very bright Lights were selected. The VBL-H (visible bright light heavy) and VBL-III. Both contracts are Indefinite Delivery, Indefinite Quantity.

The VBL-H contract is for $16.6 million and will field the HellFighter as a heavy weapons light. The HellFighter is no stranger to SOF troops and models were purchased under a similar contract a few years back. It is designed for use with weapons such as the the M2, illuminating out to over 800 yards. It’s also been used for IED detection. This unit is specific to the needs of the Department of the Navy and is technically the fourth variant. Variants II and III are being tested by other branches of the United States Military.

The VBL-III contract is valued at $14.9 million contract, fielding personal weapon lights for members of USSOCOM. The two light that were chosen feature LED lamps that provide both white and IR light. To choose one or the other the user simply pulls out and twists the head to switch between the modes. The RAID also features additional functionality as you can see on the photo.

For more info visit www.SureFire.com. other organizations who are interested in these lights visit www.adsinc.com/surefire.