ADS recently published a great primer on various forms of expeditionary shelters. It also contains a few pointers on planning considerations. The article can also be downloaded as a PDF. In this format it reads very much like a magazine and is great for passing along to others. To check the article out, visit www.adsinc.com/geared-up/industry-news-and-events/expeditionary-at-all-levels.
Tags: ADS Inc
Posted in ADS, Sustainment | Comments Off on Expeditionary At All Levels
A few weeks ago we gave you a gander at Mission First Tactical’s new foregrip and mentioned that they had several new designs on the way. They are manufactured using new materials from DuPont’s Military Plastics division.
Shown below is the Engage™ Tactical Pistol Grip, a pistol grip designed for the Stoner family of weapons (AR15/M16/M4 etc) with MFT’s own Tac Skin™ texturing. The design covers the receiver gap that causes discomfort during sustained usage. Secure watertight grip storage uses a captive plugged and has a foam block with quick access tab to diminish rattle.
Also shown is the Reactâ„¢ Magwell Grip. A lot of guys still use this hold as their primary despite having transitioned from the MP5 years ago. It isn’t wrong, it just isn’t the current preferred way to hold the carbine. Some say this grip allows for mid-point balance with less effort to direct muzzle. Additionally, there will be situations where you can’t grab to gun way out front. So this may be a good choice if you fit one of those categories. MFT has incorporated pressure pad wells to allow for accessory activation for both right and left handed shooters. Additionally, their design will not interfere with the magazine and there is a plugged secure water tight storage compartment for 2 x CR123 batteries.
Last, but certainly not least, is the first sighting of the Battlelinkâ„¢ Low Profile Stock prototype with the Garmin 401/301 Upper Mount. MFT considered the use of body armor in the design and it features an angled non-slip butt pad allowing for faster presentation. There is a pivoting rear accessed water tight storage compartment that has a foam storage block to diminish rattle. With 2 quick detach sling mounting points and an enhanced cheek weld. This product is still 2 months out from full production. Also, utilizing the accessory mounting provision they have attached a Garmin 401 GPS upper mount. This mount has been designed for the Garmin 401/301, is ambidextrous, and according to MTS, “has been over-engineered to ensure it is bomber and leaves no chance for your GPS to hit the deck.”
For more info visit missionfirsttactical.com or follow them on Facebook at www.facebook.com/missionfirsttactical.
Extreme Outfitters just added Switch Vision to their lineup. They use earth magnets on the lens and in the frame to switch out lenses, making lens changes a snap.
For a limited time, Extreme Outfitters is offering them at 25% OFF retail plus a free pair of low light lenses in Yellow. This is an exceptional deal considering Switch glasses already come with Polarized Non-Mirror lenses as well as an extra pair of Rose Amber Lenses. That’s free sets of lenses as well as a matte Black frame.
To order yours visit www.extremeoutfitters.us.
Two of the most common questions I get concerning PT is “How do you do still PT this hard at your age?”, and “Can I do your program at my age?” What I always answer is; “Age ain’t a number”. Some people are worn out and broken at 30 while others are still going strong in their 60’s and 70’s. I have seen more examples of this than I can count. Obviously some people have injuries and health problems that will limit what they can do. However, almost anyone can do something and I have seen many older (and some disabled people) do some amazing physical stuff, and that’s amazing for any age. While they’re all different people, what they all have in common is a “no excuses” attitude. They just get their butts up and go do what they can. I’m convinced that a good exercise program, tailored to your needs and lifestyle, consistently followed will not only add years to your life, but life to your years. Add to that some common sense eating and you’ll be able to do just about anything. This is not just my opinion but a fact, I see people doing it everyday. In my book “Corps Strength” I outline how you can design and follow a common sense, effective and time efficient PT program. One that will work for you, not the other way around. So the point of all this? Stop worrying about how old you are, how tired, or sore you are and just get your ass moving. Forget the excuses and you’ll be surprised at what even a little effort will bring you. I guarantee it.
Be safe and Good luck,
MGunz
The interim purchase of Gen 3 MultiCam uniforms is termed “Crye Precision Camouflage Uniform” (CPCU). The Australian variant will be called Australian Multicam Pattern (AMP).
Blade Show kicks off next Friday, 10 June with an early bird opening. Be sure to keep your eyes peeled for me and Tactical Fanboy as we attempt to take it all in including the new Tactical Gear Expo that runs concurrently with Blade Show.
Held at the Cobb Galleria Centre in Atlanta, Georgia June 10th to 12th, Blade Show will host more than 700 tables and around 175 factory booths and products.
Visit bladeshow.com for more information on the upcoming expos, including the event schedule and list of exhibitors.
Originally envisioned as a lightweight, low-cost sniper target, the SM-1 is manufactured from AR500 steel (3/8″ strike face) in order to withstand the repeated hammering of high caliber ammunition. I’ve had a couple of opportunities to see them in action and man, I can tell you, I’m impressed. The reset for this target is an amazing 1.5 seconds. Then, I found out the price and I was ecstatic. It retails at $999.00!
The SM-1 is powered by an internal battery which offers over 1500 resets per charge. It incorporates a carrying handle and is fairly lightweight (50 lbs) so it isn’t a big deal to carry it over to an outlet to recharge. While it is weather resistant, I don’t recommend leaving it out in the weather indefinitely. After all, it is manufactured from steel.
The StrikeMark SM-1 is an excellent sniper target, but they recently introduced an ingenious stand system in order to raise the targets up for pistol and other practical shooters. This has greatly increased its utility and opened it up for a whole other group of shooters. The spiked feet used to hold the target in place on the ground fit right into holes on the shelf of the stand so it isn’t going anywhere. Also, the legs are a standard pipe size so they can be cut to adjust for uneven terrain and are easily replaced.
A variety of targets have been developed including this one specifically for Advanced Armament Corporation and they are constantly developing new options.
In fact, look for StrikeMark Targets at the AAC Silencer Shoot this weekend at T1G.
At this price and capability, not only can LE agencies and private ranges afford to incorporate automated targets but individuals can as well. Additionally, StrikeMark will work with you to produce specialized targets for the SM-1.
If you’ve dreamed of working for Crye Precision, then you just might be in luck. They’re hiring; hiring an Industrial Designer with at least 8 years of experience in product design and development, that is.
This is a full time salaried position in Brooklyn, New York and the duties include:
•Development, from concept through production, of high performance, highly innovative gear, clothing and protective equipment for the warfighter
•Design direction of multiple projects, which may be in-house efforts or government R&D programs
•Project management tasks include:
1) proposal development and report writing
2) project planning, including setting, meeting and evaluating milestones
3) labor and expense tracking
4) scheduling
5) preparing presentations and attending meetings
6) travel as required (<15%)
If you think you have what it takes, visit www.coroflot.com.
