SIG SAUER - Never Settle

Archive for July, 2017

Mawashi – UPRISE Tactical Exoskeleton

Monday, July 24th, 2017

While the UPRISE™ Tactical Exoskeleton has popped up in various future soldier system program demonstrations, it was officially unveiled to the market at an offsite during SOFIC. I got a good look at it not long after, while attending CANSEC in Ottawa, Canada, in late May.

There are a whole slew of companies developing wearable robotics, or as they are more popularly known, exoskeletons. Mawashi says that Exoskeletons are a disruptive technology because they are impacting multiple industries simultaneously. Some of the systems have been created specifically for defense use. Of these, the vast majority are powered, which is crucial to the ability to lift heavy weights, such as a Power Loader taking the place of a forklift. However, that reliance on power can also be a weakness, for some applications. For example, no one wants to run out of power, midway through a mission. What makes Canadian firm Mawashi’s solution different is that it is human powered. Designed to reduce skeletal muscular injuries, UPRISE™ is an acronym for Ultralight Passive Ruggedized Integrated Soldier Exoskeleton.

Starting load carriage studies in 2005, Mawashi’s engineers investigated how the human body bears weight, in particular they looked at the severely overweight (300-700 lbs), especially Sumo wrestlers, who remain active despite their girth. Interestingly, the name Mawashi comes from the loincloth worn by the Sumo.

What Alain Bujold, President and Chief Technology Officer of Mawashi, and his team found, is that the body can bear an amazing amount of its own weight because of how it is distributed. They surmised that a load is a load; a pound, a pound, whether it’s fat or Mission Equipment.

UPRISE™ mimics the human form, with a flexible spine and sliding belt which combine to offer a great deal of freedom of movement. The exoskeleton is padded and fit is fine tuned via Boa dial at several locations on the legs.

The Harness also integrates with body armor as well as other loads such as packs. Additionally, they’ve demonstrated that gear normally worn on the War Belt, such as holsters, can be attached to the exoskeleton. No matter what is attached to the system, the entire weight of the exoskeleton is borne by a plate which is inserted like an insole into the wearer’s footwear. In fact, UPRISE™ transfers 50-80% of the wearer’s load right to the ground. Mawashi intends it for use on three to seven day missions.

Development continues. So far, the work has concentrated on the major load bearing structures of back and lower extremities, Mawashi plans to increase coverage. While UPRISE™ won’t make you run faster, and won’t give you super human strength, it will make you less fatigued, and it will help protect your lower joints.

They recently produced this video entitled, “WE ARE MAWASHI: The Rise of The Exoskeleton” which showcases the technology.


WE ARE MAWASHI: The Rise of the Exoskeleton from Mawashi Science & Technology on Vimeo.

www.mawashi.net

You Never Know Where They’ll Show Up

Monday, July 24th, 2017

Here’s one by reader RTJ, taken not far from our home office, at the recently completed UDT/SEAL Memorial on the Va Beach Boardwalk.

Fuerzas Comando Update

Sunday, July 23rd, 2017

Team USA and Colombia are tied for first place in the CT Competition. There are 3 events left (Team week PT event, Obstacle curse and the ruck march).

Thanks Brendan for the update!

The AutoGlove

Sunday, July 23rd, 2017

AutoGlove

The AutoGlove is a glove designed to allow shooters to simulate fully automatic fire with their semi-automatic firearms. The AutoGlove incorporates a ‘Trigger Assist Device’, an automated device which pulls the tigger in a variety of preprogramed configurations, including single shot, double tap, 3-round burst, or full auto. Customers will also be able to choose from either a synthetic or leather glove, in either a tactical or sporting configuration, depending on preference.

Unlike devices like bump fire stocks or speciality triggers, the AutoGlove requires no modification of the base firearm to function, only that the minimum space inside the trigger guard be 3/4″ by 3/4″, and a trigger pull weight of 3.5 lbs. The AutoGlove is available for pre-order on the official site, with an expected delivery period starting October 2017.

The AutoGlove is made in the USA using USA-sourced parts and machinery.

autogloveusa.com

Mission Spec Releases New Line of Targets

Sunday, July 23rd, 2017

Mission Spec has made available their new Reference Target Chart – A (RTCA). The A model is the first to be released in the RTC line.

About the target

The RTCA is currently available in a 13×19” configuration on 70# stock. Each 100-target pad is glue-bound on the top edge for easy management at the range. Targets are delivered unfolded and roll-free in a reusable storage box with Velcro closure. This product is printed in the United States on US-sourced paper. Each sheet features a total of 18 individual targets (12 bisected 3” target circles and 6 bisected 1” target circles). A faint 1″ grid covers the entire target area for easy reference.

Intent of the target

The RTCA was designed as a fundamentals target. By using relatively small targets the user is encouraged to shoot as accurately as possible. After the desired accuracy is achieved, the shooter can increase distance or speed to surpass their failure point. It is the duty of all who carry a firearm (civilian or law enforcement) to ensure the highest level of accuracy as every missed shot represents a supersonic liability.

By bisecting each circle target into two halves the shooter is confronted with an amount of asymmetry in an otherwise symmetrical target. Further difficulty can be achieved by only striking a desired half of each circle.

Instructors will find use for the RTCA in their classroom by being able to call an individual target circle for students to engage as well as a certain portion of the target. With half of the 3” targets being numbered and half being lettered the instructor can also introduce a small amount of mental processing for the students by declaring all numbered targets as grey area targets and all lettered targets as black area targets.

missionspec.com

Kitanica – Utili Tote

Sunday, July 23rd, 2017

It's always good to have a well made Tote available. This one is made in USA from 1000D Cordura. It features a large main compartment with two small exterior pockets and Heavy Duty webbing carry handles.

The dimensions are:
Height: 15″
Width: 14″
Depth: 6″

At only $25, this is a steal. But, you don't get to choose the color. However, from the photos we've seen, there isn't anything crazy looking.

Get yours at www.kitanica.net/Utili-Tote

.

You Never Know Where They’ll Show Up

Sunday, July 23rd, 2017

Thanks RTJ!

CJ Buck and John Sullivan Re-Elected as Leaders of AKTI

Saturday, July 22nd, 2017

Knife Advocacy Organization Chooses CJ Buck and John Sullivan to Continue as the Organization’s President and Vice President

Cody, WY (July 20, 2017) – The Board of Regents of the American Knife & Tool Institute (AKTI) recently re-elected CJ Buck, the fourth generation of his family to head Idaho-based Buck Knives, to serve an additional two-year term as president, and John Sullivan, Director of Marketing at W.R. Case & Sons Cutlery Company, to continue as vice president of the association.

CJ Buck

Buck was a founding member of the non-profit advocacy organization committed to ensuring that Americans will always be able to make, sell, carry and use knives and served two terms as vice president and was president from 2001-2003 and from 2015-2017.

In addition to providing leadership as a Board member, Buck has focused on AKTI’s legislative work, chairing the AKTI Legislative Committee until 2015. He was inducted into the Cutlery Hall of Fame in 2016 for his efforts on behalf of the knife industry.

“I’m very excited about AKTI’s legislative successes and the solutions we are working on to solve the issues that face knife users and the entire knife industry.” Buck said. “It is an honor to have the Board’s confidence and to continue leading two separate major federal initiatives. We are working on legislation to protect knife owners traveling from state to state and to remove the commerce restrictions on automatic knives.”


John Sullivan

Sullivan has volunteered on the Board of Regents of AKTI since 2012 and has been involved in the knife industry for over twenty years. As AKTI vice president the past two years, he has been involved in the organization’s fundraising event at the Blade Show, and on the membership, legislative and finance committees.”AKTI best represents the interests of the knife industry and the concerns of individual knife users. I’m pleased to continue to work with a united board that is committed to the growth of the industry and that our customers can freely use the knife of their choice.” Sullivan said. “W.R. Case is eager to give back to the organization that has made a difference, protecting and ensuring our ability to make and use knives.”

The American Knife & Tool Institute is governed by a nine member Board of Regents that include a broad cross section of the knife industry. Regular input to the Board from Advisory members also adds to the knowledge, credibility and professionalism of the organization to represent a broad spectrum of issues for the knife community.
For more information visit www.AKTI.org.