SIG MMG 338 Program Series

Archive for 2018

Greyhive Snapshot – Drew Estell

Saturday, February 24th, 2018

How Do You Scan and Identify Targets?

How do we properly scan? We’ve all the seen people on the range that keep their eyes in their sights and move their weapon from left to right as a habit. While it looks good and they are checking the block on performing this critical task, sometimes those people aren’t actually identifying anything and are setting themselves up for failure.

If you keep your eyes in your sight while scanning, you are limiting yourself to what is within that toilet paper tube sized housing. With some sights, this is even smaller. As much as we train to go into broad target focus with the sight in line with our eyes, having it there will inevitably pull you back into what’s only visible from that housing. On top of this, red dot is already on your target.

We put our sights on target thousands of times and pull the trigger. Do you think anything will be different when you have to discriminate between a threat and a non-threat? Your brain has been wired to see a red dot or sights on target and pull the trigger. How about when other good guys have a weapon like a police officer responding to a call? Give yourself the time and space necessary to properly identify those around you in an actual situation. By lowering the weapon slightly so that the sights are not immediately visible and on your target, you are creating the amount of time and space necessary for your brain to identify the target, and potentially tell your firing hand not to pull the trigger if needed. I would want that split second extra to determine if what was in the suspect’s hand was a cell phone, an unidentified person holding a badge, or the shape in the middle of the night was actually my wife who accidently tripped over my gym bag while she was checking on the kiddo. There’s a lot of situations that this could be important, I’m sure you can think of several and add it to the comments below.

A good rule of thumb with a rifle is to be able to turn your chin over your buttstock. With a pistol, lower the gun down to your upper chest or break it back enough to be able to see the torso area of those around you. Hands aren’t always above the shoulder line to determine if they have a gun, and badges aren’t always high on the chest to easily see. When you have your weapon pressed out in your line of sight, you are effectively cutting off the majority or the torso that gives us the ability to identify what we need, get a snapshot of the person, and proceed into our “snapshot… hands, aim, shoot” process of target identification.

Scan with your eyes and actually identify the targets to your left and right of your area. ID target, engage until target begins to go down, gun down, eyes lead gun, and snap onto next target if required. Use your eyes to gather information and determine whether or not you will give commands or engage depending on your situation. You can only shoot as fast as you can see, and you can only make decision as fast as you can process information. Don’t limit yourself on either, or set yourself up for failure.

thumbnail Drew Estell is the owner of BAER Solutions, and served for a decade in Special Operations. He has been fortunate enough to serve with soldiers and instructors who were invested in his success, and as such have benefited from the years of experience that each of them had. During the course of his multiple combat deployments and experiences, he has learned that no shooter is the same.

In addition to weapons training classes, BAER Solutions offers leadership and team building consultations. BAER Solutions also works with police departments to take lessons learned from SOF deployments and apply them to the specific needs of the local governance and populace. By combining SOF tenets of Village Stability Operations and the concept of Community Policing, they deliver a consulting and training package called Unconventional Policing.

For more information this topic, create your free account at Greyhive and subscribe to our YouTube channel to watch the pistol ready position videos demonstrating this.

Snapshot is a bi-weekly series from Greyhive featuring content written by our Experts. It is our goal to deliver information that prompts you to examine your preparedness from all angles, not just how quickly and accurately you shoot.

UF PRO Presents the Pro’s Guide to Tactical Shooting

Saturday, February 24th, 2018

Here’s the preview:

To sign up for updates, visit ufpro.com/tactical_shooting

Propper 1967 Heritage Sale

Friday, February 23rd, 2018

Celebrate 50+ years of top quality tactical gear with 19.67% off sitewide thru 3/4, promo code 1967.

https://www.propper.com/

Sneak Peek – Garmont T4 & T4 Tour

Friday, February 23rd, 2018

The new T4 is coming in June 2018.

The new T4 Tour is coming in August 2018.

BRONCO II Launched For USA

Friday, February 23rd, 2018

22 February 2018. In a move set to revolutionize the light attack and tactical C4ISR aircraft industry, the launch of the BRONCO II aircraft is announced today by newly created Bronco Combat Systems (BCS) USA.

The original Bronco was renowned for its impressive mission capabilities. The BRONCO II, which is based on the AHRLAC aircraft (Advanced High-Performance Reconnaissance Light Aircraft), is a two-crew C4ISR and precision strike aircraft, capable of carrying a wide range of weapons, sensors and systems in extended airborne mission operations. It is a unique platform that is built for purpose; uses a pusher propeller and has an open system architecture allowing for the rapid incorporation of current and emerging systems, setting a new standard for mission flexibility and adaptability.

Paramount Group International Chairman Ivor Ichikowitz said, “This aircraft is a real game-changer for the warfighter. It is unique in that it has been designed specifically as a light attack and ISR platform from the onset. This is not simply an armed variant of a civilian crop-duster or a modified training aircraft. Every inch of this aircraft is designed for purpose – specifically for the kind of asymmetrical warfare that sophisticated military forces are now being asked to conduct. These missions demand rapidly deployable, hybrid ISR and close air support capabilities for which no other platform has been specifically designed.”

AHRLAC, the platform upon which the BRONCO II is based, is already in production using the latest advanced aerospace manufacturing technologies. The fact that the aircraft is 100% digitally designed makes the ability to industrialize the BRONCO II in its totality in the United States a reality. Work has started on establishing a manufacturing base that will enable the full production of the airframe and mission systems integration in the United States.

Ichikowitz went on to say “BRONCO II was designed with the US market in mind; it contains significant American content and we are now excited to be able to commit to bringing full production of the aircraft home to the USA.”

The BRONCO II’s internal Interchangeable Multi-Mission System Bay (IMSB) allows a single airframe to be easily and rapidly re-configured to perform multiple roles, incorporating high-performance targeting sensors, network communication systems, precision weapons, an electronic self-protection suite, and mission planning systems.

The aircraft is a purpose-built, sophisticated airborne Find/Fix/Finish/Exploit/Analyze (F3EA) system able to operate for extended periods in remote theaters with minimal infrastructure and a small logistics and maintenance footprint. The BRONCO II operates at a fraction of the procurement and lifecycle cost of an aircraft with similar mission applications and capabilities.

Fulcrum Concepts LLC will lead weapons and system integration for BRONCO II. Fulcrum Concepts Co-Owner and President of Engineering Solutions Scott Richman said, “BRONCO II is the ultimate solution to the F3EA capability, a truly multi-role aircraft with real-time C4ISR perfectly suited to the kind of light attack requirements we are seeing coming out of the U.S. military forces and a number of other programs in the U.S. market. We are excited by the opportunity to be one of the lead partners in bringing this innovative capability to the United States.”

Dr. Paul Potgieter, the CEO of the Aerospace Development Corporation which designed the aircraft, stated: “This aircraft is a completely clean-sheet, next-generation design, using the latest CATIA and digital design systems specifically for digital production. Even the factory in which this aircraft is currently being produced embraces the innovative principles of the Fourth Industrial Revolution by emphasizing the use of rapid digital prototyping, laser additive and 3D printing, and a jig-less manufacturing approach.”

Bronco Combat Systems has been established as a US based entity which will bring the aircraft to the US end user. The founding partners are Paramount Group USA, Fulcrum Concepts LLC, and ADC, who designed the AHRLAC platform. Bronco Combat Systems are actively engaging with other domestic U.S. partners to scale the entity in both capability and reach.

“This is a very exciting time for us, our partners and future US customers who will benefit from the rapid fielding of the Bronco II and its unique capabilities. Discussions are underway with highly respected and experienced US suppliers for total supply chain management, mission software, and mission training.” added Ichikowitz.

More information relating to the BRONCO II and the Bronco Combat Systems team will be released in the coming weeks.

Imminent Threat Solutions Releases the TourniQuick

Friday, February 23rd, 2018

Designed to rapidly deploy and store modern tourniquets.

4D655CA2-A13B-4EB9-8D67-55BB06982DFC

[ARLINGTON, TX, 02/23/2018] Imminent Threat Solutions is proud to release the TourniQuick®. This patent-pending device is the first-ever system designed to rapidly access and deploy the two most common CoTCCC (committee on tactical combat casualty care) recommended tourniquets on the market. This revolutionary tourniquet deployment system reduces time from deployment to application, saving valuable seconds. Remember, seconds count when you’re bleeding out!TM

EB038EE6-79B4-45A2-9728-9988DC8042B1

The TourniQuick® features Imminent Threat Solutions’ patent-pending, 4-Way Mounting SystemTM. The 4WMS allows a user to mount the TQ vertically on a duty belt, vertically to MOLLE (PALS webbing), horizontally on a belt, or even vertically on a backpack strap. The mounting possibilities are truly unlimited.

An added benefit of the inherent design in the TourniQuick® is to protect a tourniquet from exposure to the elements. Dirt, debris and UV Light can degrade the life of these life-saving devices.

Imminent Threat Solutions provides indispensable skill-sets and products to explore your world and prevail against all threats.

For more information on the TourniQuick Pouch, please visit TourniQuick.com.

Last chance to get Early Bird pricing for the Raine Bridger

Friday, February 23rd, 2018

image-16.jpg

Last chance to get Early Bird pricing for the Bridger™. The Kickstarter ends this Friday (2/23) at Midnight.

Link to Purchase the Bridger™: www.kickstarter.com/projects/256206016/molle-cover-for-tubestm-cummerbunds-plate-carriers

Full Project Overview @ Kickstarter Link: www.kickstarter.com/projects/256206016/molle-cover-for-tubestm-cummerbunds-plate-carriers

Contact Raine at Bridger@rainetactical.com for questions.

Disclaimer:

The Strandhögg plate carrier pictured in this post and the video is made by Firstspear, LLC and the Bridger™ products are made by Raine, Inc with Tubes™. FirstSpear®, Tubes™, 6/12™ and 6/9™ are trademarks of FirstSpear, LLC. Products shown with these trademarks are built with FirstSpear Technology™.

Bridger™ products are patent pending (US and International).

FirstSpear Friday Focus – Operator Glove Sneak Peek

Friday, February 23rd, 2018

The FirstSpear “OG” is a 100% US Manufactured Shooting Glove, selected by a US Special Operations Command element as issued handwear.

img_6200.jpg

Utilizing a unique core spun nylon US Merino Wool sourced directly from Open Range LLC and FS High Dexterity Leather (FS-HDL) with Touch Screen Compatible Thumb and Trigger Finger the OG gives inherent “No Melt No Drip” protection in addition to the natural anti-microbial properties of Wool. The design of the glove features an almost effortless flex that makes for comfortable grip during long shooting sessions. The OG puts protection where the SF Shooter needs it and keeps the overall function light and flexible. The FS-HDL is a Goat Skin, textured to provide enhanced grip during the tanning process this goat impregnated with carbon that aids in not only shedding water but once water saturation has happened keeps the gloves soft and flexible after they dry.

For the FS-OG, the US Merino is spun around a nylon core. In this manner, the glove is a low luster product with the next to skin comfort Merino Wool while still retaining burst strength of the nylon. This material will not shine or reflect in the field even when wet. During field trials with Army SF it was found that the initial Black dyed wool used in the test sample OG’s was too hot in the Summer Sun. For this reason FS and Open Range developed three color formulations specific to this new fabric. The first FS-Commando is a light greenish hue and has FS-HDL dyed to match it, the second FS-Sand is close to light Coyote Pantone 80132 with its own matching FS-HDL and finally FS-Manatee Grey which has not yet received a NSN assignment.

With production under way, delivery of the first FS-OG’s is beginning in late March.

Within its Commercial “Hands On” Product Line, FirstSpear will still be stocking its Non-Berry: Operator Inner Glove (OIG) and Operator Contact Glove (OCG) both of which have several of the OG’s features but in two different weights (OIG is slightly lighter and OCG is slightly heavier) however the Berry Compliant OG will also be in stocking inventory to support growing SOF & DoD needs.

www.first-spear