SIG MMG 338 Program Series

Archive for 2018

MCTSSA Conducts Systems Operability Testing Aboard USS Boxer

Sunday, October 7th, 2018

CAMP PENDLETON, Calif.—Engineers and technical experts from Marine Corps Tactical Systems Support Activity conducted systems operability testing in September aboard the amphibious assault ship USS Boxer (LHD 4) in support of 11th Marine Expeditionary Unit operations.

Amphibious warships must be able to sail in harm’s way and provide a rapid buildup of combat power ashore in the face of opposition. This requires cyber-enabled network Marines to integrate shipboard systems, and provide combatant commanders real-time command and control capabilities.

Capt. Victor Castro (left), Marine Corps Tactical Systems Support Activity engineer, provides over-the-shoulder training to Cpl. Jonathan Parlett (right), 11th Marine Expeditionary Unit data systems administer, during systems operability testing aboard the amphibious assault ship USS Boxer (LHD 4) Sept. 5. (U.S. Marine Corps photo by Sky M. Laron)

“Whether you are fighting the ship or assaulting an objective, communications and information management are critical for mission success,” said U.S. Navy Capt. Ronald Dowdell, Boxer’s commanding officer. “The MCTSSA experts that came aboard the ship enhanced Navy and Marine Corps integration, and also enabled Boxer [Amphibious Ready Group] to become a more lethal force.”

The 11th MEU is a forward-deployed, flexible sea-based Marine air-ground task force capable of conducting amphibious operations, crisis response and limited contingency operations, to include enabling the introduction of follow-on forces and designated special operations in order to support the theater requirements of geographic combatant commanders.

The primary objective for the MCTSSA team was to assist the 11th MEU in integrating tactical command, control, communications and computers—or C4—systems into the afloat environment.

Marine Corps Tactical Systems Support Activity engineers and technical experts tested various command and control systems in the afloat environment aboard the amphibious assault ship USS Boxer (LHD 4) Sept. 4-7 (From left: Derrek Bond, Rudy Banzali, Joe St. Onge, Will Santiago). (U.S. Marine Corps photo by Sky M. Laron)

For Marines aboard ship, the Landing Force Operations Center, or LFOC, is the primary space for leaders to plan and execute amphibious operations. The functions of the LFOC mirror those of a Combat Operations Center, controlling and monitoring all landing force activities until command is established ashore.

“The support received from MCTSSA enabled months’ worth of troubleshooting systems checks to be completed in days, setting the stage for the 11th MEU to move forward with greater confidence in our amphibious C4 systems,” said Capt. Jeffrey Robbins, 11th MEU assistant communications officer.

The time spent optimizing systems in the LFOC and Supporting Arms Coordination Center allowed the MEU to validate critical satellite communications and digital fires systems, which will be used to plan and execute landing force fire support and amphibious operations, said Robbins.

Brig. Gen. A.J. Pasagian (right), commander of Marine Corps Systems Command, speaks with Capt. Ronald Dowdell (left), USS Boxer commanding officer, Sept. 13, aboard the amphibious assault ship USS Boxer (LHD 4). The familiarization tour came one week after engineers and technical experts from Marine Corps Tactical Systems Support Activity conducted systems operability testing aboard the ship. (U.S. Navy photo by MC2 David Ortiz)

“Both the 11th MEU and MCTSSA were equally invested in the effort,” said Capt. Caleb Wu, MCTSSA assistant naval systems integration officer. “It was great to see the two teams tackle difficult technical issues side by side.”

Many of the C4 systems integration issues that MEUs face at sea include: physical connectivity, power, space, network accessibility and throughput, data and voice communications, system configurations, information assurance and cybersecurity.

“MCTSSA’s presence onboard BOXER was absolutely invaluable, and they are the bridge that ensures that all blue in support of green communications suites are properly fine-tuned prior to the embarkation of the 11th MEU or any MEU,” said Ens. Joe Tran, Boxer communications officer. “All of our efforts are ultimately geared toward safe operations of the ship and supporting our combat power.”

Specifically, the testing supported engineering and risk reduction, identification, and possible elimination or development of work-arounds for any C4 interoperability issues.

“By resolving many of those concerns months prior to their first ‘at sea’ period, the 11th MEU is far more prepared for any work-up or deployment,” said Maj. Paxton Miller, MCTSSA naval systems integration officer. “As we better understand the requirements and challenges of how MEUs employ C2 systems aboard ship, the value of these events will continue to grow.”

Boxer is homeported at Naval Base San Diego. For more news from USS Boxer (LHD 4), visit www.navy.mil/local/lhd4/.

MCTSSA, an elite, full-scale laboratory facility operated by the Marine Corps, is a subordinate command of Marine Corps Systems Command. MCTSSA provides test and evaluation, engineering, and deployed technical support for Marine Corps and joint service command, control, computer, communications and intelligence systems throughout all acquisition life-cycle phases.

By Sky M. Laron, Public Affairs Officer, MCTSSA

UF PRO – Delta AcE Plus Gen.2 Jacket

Sunday, October 7th, 2018

New UF PRO® Delta AcE Plus Gen.2 Tactical Jacket Offers Enhanced Protection from Cold Weather

The Delta AcE Plus Gen.2 Tactical Jacket from UF PRO® is set to debut. The jacket’s design and materials provide extra warmth in extreme cold weather without overheating the wearer or causing loss of focus.

TRZIN, SLOVENIA (2 October 2018)—Soon to be available from UF PRO® is the long-awaited Delta AcE Plus Gen.2 Tactical Jacket, which the maker of innovative clothing for military and law enforcement personnel said today will prove ideal for wear while engaging in heavy physical activities at or below freezing temperatures.

“Extreme cold weather has always been a challenge to work in because it shifts your focus away from whatever vital tasks you’re doing and puts it instead on just trying to stay warm,” said UF PRO® head of product development Armin Wagner.

“Our new Delta AcE Plus Gen.2 Tactical Jacket solves this problem by providing the extra warmth you need in order to stay focused on the mission,” Wagner said. “And, the jacket does this without causing you to become overheated.”

Wagner predicted purchasers will discover so much to like about the UF PRO® Delta AcE Plus Gen.2 that they will make it their go-to tactical jacket.

Weighing less than a single kilogram, the new version of the jacket builds on the high-performance characteristics of the original UF PRO® Delta AcE upper-body outerwear, Wagner disclosed.

“Its face material is still 100-percent windproof and water-repellent, and we continue to use the special lightweight thermal-insulation lining that works even when wet,” he said. “But now, this tactical jacket is more of a workhorse than ever—and it’s as much at home in the cold as it is in dust and dirt,” he said.

One of the key improvements of the UF PRO® Delta AcE Plus Gen.2 Tactical Jacket is better moisture management. The sleeves, for example, are lined with merino wool—a fiber acclaimed for its exceptional comfort and moisture wicking properties.

“These sleeve liners absorb body moisture and transport it outside the jacket extremely fast,” Wagner explained.

Also big: the UF PRO® Delta AcE Plus Gen.2 Tactical Jacket features detachable air/pac® inserts in the shoulder and upper back.

“The air/pac® inserts create an 8mm-thick air barrier between wearer and outer fabric,” Wagner noted. “This traps hot air, providing needed heat and super-rapid drying.”

Another major improvement is the abrasion-resistance capabilities of the sleeves and side-stretch panels.

“We reinforced the elbows with CORDURA®, which is just about the toughest and longest-lasting synthetic fabric available,” Wagner said. “And we also added ultra-strong nylon mesh to the side-stretch panels. The result is a tactical jacket that holds up exceptionally well, even under the load of a heavy plate-carrier and backpack.”

Responding to user wishes, UF PRO® designed the Delta AcE Plus Gen.2 Tactical Jacket to include an adjustable collar. Said Wagner, “You can regulate the amount of protection your neck gets while you’re being blasted by icy wind. This feature is meant to let you stay comfortable at all times and in all conditions.”

Yet another enhancement is the addition of a strap to make it easier to open the jacket’s zippered upper-sleeve pocket.

“If you don’t have a free hand to work the zipper, you can just grab the strap with your teeth and pull on it by tilting your head—the zipper will slide right open,” Wagner said.

Topping it all off, the UF PRO® Delta AcE Plus Gen.2 Tactical Jacket now comes with wrist warmers that have openings sized to let the face of a wristwatch peek through.

“Keeping an eye on the time is essential in almost every type of situation, and the way we’ve designed the wrist warmers allows you to easily do just that,” said Wagner. “No need to fumble around with the sleeves to get a look at your watch. You simply glance down and there’s the time.”

The UF PRO® Delta AcE Plus Gen.2 Tactical Jacket soon will be available at the company’s online shop and at its distribution partners, according to Wagner.

He added that subscribers of the UF PRO® newsletter can look forward to being the first to receive word of the exact date of initial availability.

For more information about the UF PRO® Delta AcE Plus Gen.2 Tactical Jacket and other outstanding UF PRO® products, or to subscribe to the UF PRO® newsletter, please visit the company’s website: ufpro.com/delta_ace_plus_gen_2_tactical_jacket

Blade Show West 18 – Doublestar Fury Crashete

Saturday, October 6th, 2018

Designed by Rob Cabrera of Filo Bladeworks, you can definitely see the Kali influence on the Fury. The fury boasts a 10″ blade made from .285” thick S7 Tool Steel, although the full tang extends to 18.25″ in length. The blade is also cerakoted in Midnight Bronze. The handle is G10 and it comes with a Boltaron sheath. Made in the USA!

star15.com/furytm

Blade Show West 18 – SIG SAUER Knives by Hogue Knives

Saturday, October 6th, 2018

There was a time when the only way to get a SIG knife by Hogue Knives was to be a member of the SIG Legion. But now, there is a line of different designs available to everyone.

The knives are all made in the USA from US sourced materials. The blades are 154 CM or CPM154 stain resistant steel that is cryogenically heat treated to a Rockwell of 57-59. They include fixed, folding and automatic options.

Check out the full line here.

Blade Show West 18 – Williams Blade Design

Saturday, October 6th, 2018

Williams Blade Design is run by James Williams and sons. James is a former Army officer with iver 50 years of experience in the martial arts, having developed The System of Strategy. For over 20 years he has been creating blade designs for himself and others. While they are made in relatively small batches, they are highly sought after as working blades.

Seen here are several of his designs. The HZT 002 features a 6.5″ Blade made from 80CrV2 by Daniel Winkler.

If you’re a true knife aficionado, you’ve probably already heard of James Williams and his knives. If not, poke around this website and check out his designs, both on williamsbladedesign.com and CRKT.com.

Blade Show West 18 – Cascadia Points by Cascadia Cutlery

Saturday, October 6th, 2018

Cascadia Points consist of a three pack of lightweight arrowhead-style points linked together on para-cord. You can carry them in your survival kit and they are ready to be lashed to a pole. The heads include a classic arrow shape, split-prong fishing point and side-notch arrowhead.

Made in the USA from heat treated 1095 tool steel by Cascadia Cutlery.

Blade Show West 18 – OOAK Forge Aluminum Straight Shooter Slingshot

Saturday, October 6th, 2018

One of the cool things about Blade Show is the creativity of the makers. Take for example this slingshot.

Made from aircraft aluminum with a rubber band, it’s compact enough to fit into the palm of your hand or back pocket. It will even tuck into PALS webbing.

Available in Gold, Purple, Black, Red, and Raw Aluminum.

www.ooakforge.com/listing/627450796/aluminum-straight-shooter-slingshot

Blade Show West 18 – Gerber Flatiron

Saturday, October 6th, 2018

I really like the Flatiron’s cleaver design. It features a 3.6″ blade paired with a textured G-10 composite handle. Well, I guess I should clarify. The scale on the side with the lock, is aluminum. The other one is G10.

You’ll notice the extra plate beside the lock. That’s to keep a tight grip from indexing the lock during opening and slowing it preventing a complete opening to full lock.

Details:
? Full length: 8.5″
? Blade length: 3.8″
? Blade steel: 7Cr17MoV
? Cleaver style, satin finish blade
? Thumb hole for one-hand opening
? G-10 composite handle scales
? Frame lock
? Pocket clip

www.gerbergear.com