GORE-TEX Footwear at Tactical Distributors

Archive for the ‘Advertiser’ Category

Here’s Your Chance To Be A Part Of The TD x RE Factor Cover Shirt Beta Test

Thursday, August 3rd, 2017

The Jedburg Cover shirt is the first shirt design for those who carry, by those who carry. Tactical Distributors and RE Factor Tactical are setting out to make the perfect cover shirt with the design help of customers and professionals. This initial, limited run is being offered at a deep discount, getting the shirt into your hands so you can provide them with much-needed feedback on how to make it the perfect fit.

The Jedburg's appearance is designed to allow you to blend into everyday life. It offers an athletic cut that allows for enough room for your pistol but still gives a nice appearance for everyday wear. The pearl button snaps give you quick access to your pistol and the reinforced inner walls of the shirt help you clear the pistol for your draw. In addition, they placed pockets at the bottom of the shirt that said in swinging the shirt when conducting a draw. Finally, the stretch fabric allows you to easily present your pistol as well of plenty of mobility.

When you purchase this shirt you will be given a link to provide feedback on the shirt. In addition to purchasing this shirt, you will also receive a discount code for the final design when it becomes available.

IMG_3360

-Designed by shooters for shooters
-Athletic Fit w/Air-wicking material
-Easy access pearl snaps
-Passport sized breast pocket 3 total interior pockets for concealing
-Lower pockets aid in pistol draw
-Inner reinforced areas reduce pistol "printing" and offer easy draw access
-Stretch material offer the ability to present the pistol with or without concealed body armor
-Fabric- 60% Cotton 35% Nylon 5% Elastan

Available in Blue Shadow or Bark Urban Grey, sizes Small – 3XLarge.

Get yours from Tactical Distributors or RE Factor Tactical.

Gunfighter History Pt 5 CSR – Concealable Sniper Rifle

Thursday, August 3rd, 2017

SEC_3432

The M24 Remington Bolt Action Rifle has been the standard in accuracy and reliability for the US Army since 1998. Consistently delivering sub MOA performance on demand, the M24 is 43″ overall length is very much, a traditional sniper rifle.

Today, more than half the world’s population lives in urban spaces. Drawn by economic opportunities, social connectivity, infrastructure and better standards of living, the useable landmass of these metro areas can only support so many people giving rise to a sprawl of smaller cities, suburbs and slums, often built directly adjacent to the primary area. Built specifically around zero fail missions in these settings, we needed a sniper rifle that was maneuverable and could be end user carries with a reduced signature.

SEC_3423

At first, we explored gas guns. While making excellent battle rifles, a gas gun, no matter the tolerances, cannot predictably deliver the pronounced accuracy of a bolt gun.

From the ground up, the receiver on AR10 pattern rifles simply does not have the mass to retain a heavy contour precision barrel in a predictable position after it settles from a shot. Also, while tight chambers improved accuracy on manually fed bolt guns, in practice, they caused reliability issues when magazine fed by a gas or piston weapon system because, even 95% performance is not 100% of the time.

SEC_3394

Built for the M118LR round, we started with the Surgeon 591 SA(Short Action) and a 16″ 308 barrel. This “short” barrel would make the weapon system easier to maneuver and could be removed to further reduce the end user’s profile. The barrel could then replaced with zero effect to the 1/2 inch groups the CSR consistently delivered, thanks to the tolerances Surgeon used/uses in manufacturing their barrels.

SEC_3421

Housing the Surgeon action and barrel, is a Remington Accessory Chassis System (RACS). Not only the lighter than other rifle chassis, it is one of the fastest to break down and set up, with only 3 bolts needed to remove the handguard. The free float handguard is modular, allowing user configuration to keep the weapon as light as possible and features wire channels and plugs to route and manage cables.

SEC_3418

The RACS also features a skeletonized folding stock with adjustment in the recoil pad and cheek height to support a range of scopes with bells and objective lenses of varying size. Stock folded, it can be fit into a normal sized bag, something seen in every day life, and still be immediately accessible to the end user if the situation dictated. That put a 800 meter gun in a day pack. A capability unlike any other at that point in time.

SEC_3433

Fully loaded, the CSR is about the size of a M4. It can be maneuvered quickly through doors, windows, alleys, ladders, and hallways without encumbering the end user. It can live alongside of a carbine in a vehicle, meaning it can go everywhere and be deployed at the same speed as a carbine.

Today, the CSR is employed by law enforcement and security professionals in the exact settings and mission it was designed for. It is second to none.

Assorted contributors to include
Tyler Payne
Shawn Wiseman

www.bravocompanyusa.com

CORDURA® Brand and The North Face Recreate Vintage Packs

Wednesday, August 2nd, 2017

The limited-edition line also incorporates the talent of Bearse USA, YKK, Brookwood, and Horween Leather with inspiration from latest generation Multicam® print military fabrics.

WICHITA, KS – July 27, 2017 – INVISTA’s CORDURA® brand has “brought the band back together,” teaming up with The North Face and three other original suppliers to recreate a limited-edition collection of packs featuring the authentic notes of the ’68 Daypack and the ’78 Duffel series – re-engineered. The new bags bring back inspiration from the sixties and seventies, combined with the forefront of today’s cutting edge fabric technology. The collaboration marks another milestone in an exciting CORDURA® brand 50th anniversary year.

“As we continue to nod to 50 years of innovation, what better way to honor our longstanding history with The North Face than a completely revamped collection from one of their original 1960s bags,” said Cindy McNaull, CORDURA® brand and marketing director. “This year we’re all about combining our durable heritage with the latest cutting-edge innovations hitting the marketplace, and as a leader in the outdoor and adventure industry, The North Face has always known the critical importance of engineering products with fabrics that are built to last.”

The bags combine collaborative innovation with military heritage, and are designed to bring added durability to outdoor, extreme sports and active lifestyle applications. The North Face made the products in the United States, as they were originally made, in a Chicago factory whose roots go back to the WWI-era.

“CORDURA® fabric is just the best, and through this collaboration we really wanted to elevate the high-quality, made-in-the-USA story,” said Greg Dailey, senior product developer at The North Face. “We have a long history with the brand, and this 50th anniversary collection is a perfect tribute to our continued partnership.”

The use of Black and Arctic Multicam® CORDURA® fabric from Brookwood, one of the brand’s longest running authorized mills, was inspired by the need for longstanding durability d combined with modern design. The fabric, traditionally used in military and tactical applications, infuses an authentic military feel into the rugged, outdoor pack designs that The North Face pioneered and continues to be so well known for.

“It was a great honor to have the opportunity to collaborate on a collection with these key industry players once again,” said Tom Auer, president at Bearse USA. “Recreating a vintage pack with a legendary product like CORDURA® fabric – which has always been high-quality – is an exciting opportunity, not only because of the brand history but because both companies have been innovating ever since.”

The bags also feature high quality YKK zipper technology and and signature leather trims from Horween Leather.

Only 2,000 of the packs will be created for this special edition line. The collection will be available commercially online, in flagship The North Face stores, and in a number of wholesale retailers in the Chicago area. For more details and behind-the-scene footage on the collection, be sure to visit cordura50years.com/TheNorthFace.

For additional information on CORDURA® brand’s 50th anniversary collaborations, visit cordura.com/50years.

Gerber Introduces New Fishing Collection Built For The Adventure Angler

Monday, July 31st, 2017

We recently had a chance to check out this new fishing line of tools from Gerber during last week’s Outdoor Retailer Summer Market. We already showed you one product. Now, here’s an overview of the whole line.

PORTLAND, OREGON – GERBER, an industry-leading manufacturer of personal knives, multi-tools, and gear, announced today that it will debut a category-defining collection of fishing products at iCAST 2017 in Orlando, Florida. The first look comes ahead of the spring 2018 launch date, when the collection becomes available for purchase nationwide.
For a new breed of fishing, a new generation of tools. Hardcore anglers need tools that work even harder. Tools that take them beyond the beaten path, beyond self-imposed limits, beyond anything and everything that stands in their way. Gerber introduces a new line of multi-functional fishing products that outfit the angler from the trek in, to the catch, to the victorious journey home. These tools are purpose-built for the adventure to extend the experience anywhere and everywhere the angler dares to tread.

“Gerber is known for reimagining the common tool and delivering intuitive, multi-functional gear.” said Andrew Gritzbaugh, Vice President of Marketing at Gerber. “This new collection of fishing products is rooted in Gerber’s extensive experience developing problem-solving products for users in expeditionary environments – from US Soldiers in Afghanistan to Elk Hunters in Montana. This new fishing collection will serve the experienced angler by providing intelligent design, insightful material combinations, and progressive new technologies that will enable them to venture farther and fish beyond.”

The new collection features 12 multi-functional tools that are painstakingly designed and tested, because if it’s taking up space in a kayak, on an ATV, or inside a vest, it better be worth it. Do more and go farther while taking up less space – explore a few leading products.

LINEDRIVER Line Management Multi-tool

IMG_3316

Keep the line in the water. The compact, dual-ended LineDriver has everything needed to simplify line management: one end rotates to quickly tie knots and clear eyelets, the other end features a crimper, hook threader, and scissor snips. A pocket clip and tether point keep the tool secured for easy access. 

MAGNIPLIERS 7.5” Pliers


Get a grip on the unexpected. Swift power is on hand with the durable, hot-forged Magnipliers. The ergonomic trigger grip is offset to keep line of sight in tight places, while the finger choil offers maximum control. The thumb lock and ambidextrous tether points ensure safe stowage and transport while on the move. [Pictured on the Defender Tether.]

PROCESSOR Take-A-Part Shears

Whether on the boat or the shore, you need a tool that can do it all. The Processor Take-A-Part Shears work as a cohesive unit and as independent tools; creativity and control collide in this revolutionary design.

Controller Fillet Knife System [6”, 8”, 10”]

Make short work of messy business. The Controller Fillet Knife System is designed for clean, smooth cuts with a flexible blade that provides just the right amount of give. The intuitive GuideFins™ & tactile HydroTread Grip™ offer ultimate control of the knife, even in slippery conditions.

FreeHander Line Management Tool [Nipper]

The FreeHander lives up to its name, offering one-hand engagement when cutting and securing line. The wide paddle design gives intuitive purchase in cold or wet conditions, and moveable parts provide a custom fit. Optimized for use with Mono & Fluorocarbon line.

Neat Freak Braided Line Cutters

Don’t get caught in the fray; cutting with precision was a key design influence of the Neat Freak Braided Line Cutters. Micro serrated blades partner with BearHand Control™ to deliver ergonomic confidence in hand.

Gutsy Compact Processing Tool [Solid State]

When the tacklebox isn’t a reality, the slim Gutsy is an on-the-go solution that is ready when opportunity strikes. Designed to be efficiently stored and intuitively used, this solid state tool offers 4 essential functions to get the job done.

Defender Tether [Large]


The Defender Tether offers a carabiner designed to fit on-finger for intuitive control and a patented line vise on each side for secure tension relief. Line is protected by an override lock-out system, and the tool is easily carried on straps, belts, or waders w/ a wide-body flexible clip.
*also available in Compact size, features differ slightly

TNVC’s Giving Your Smart Phone Night Vision Capability Without Having To Acquire Different Adapters For Your Particular Smart Phone!

Saturday, July 29th, 2017

FoneMate_Phone_ex

TNVC has teamed up with Tele Vue, who manufactures some of the worlds finest telescope eyepiece and telescopes out there to bring you their FoneMate Night Vision Smart Phone Adapter System.

FoneMate_Phone_af

Tele Vue’s excellent FoneMate is a universal Smart Phone Adapter that interfaces with many different optics. Completely adjustable, the FoneMate will accept any smart phone with any protective case (from the ridiculously large, to the thinnest models out there), and lock it into a cradle that mates with other optics. Most smart phone adapters are specifically designed to work with certain phones. But FoneMate is the most rugged and universal solution to adapting your smart phone to other lenses. That’s where TNVC steps in.

20170728_160733_resized

Tele Vue and TNVC teamed up to develop the ultimate Smart Phone to Night Vision Adapter System. An exclusive TNVC adapter will interface the FoneMate with any night vision monocular that contains a PVS-14 Eyepiece Assembly (PVS-14, MOD-3B, GT14, Etc), providing perfect alignment for crisp photography and viewing on a digital screen. It will even attach to the popular Trijicon Electro Optic line of thermal imaging systems. This is the first system specifically designed for this application and we’re excited to bring this to the market.

_DSC7788

TNVC’s President and CEO Vic Di Cosola is also an avid amateur astronomer in which TNVC and Tele Vue have also co-developed a new AFOCAL PVS-14 lens adapter for The Tele Vue line of telescope eye pieces that now allows you to mate your PVS-14, MOD-3 or any other NVD that uses PVS-14 lens systems to telescopes.

We are excited to be working with the most noted telescope and eyepiece manufacture out there. Al Nagler is a legend in the astronomy and glass world, an iconic figure who has been developing some of the best glass for over 50 years!

ORSM 17 – Gerber Anchor Line

Friday, July 28th, 2017

Gerber introduced a whopping 14 new tools for the fisherman at OR Summer Market. They were all impressive and while a few may be crossover products to the tactical market, I thought the Anchor Line was a great place to start.

Built in two sizes, Small and Large, the retractable, 36" or 48" Dyneema lanyard can be extended and locked in place in a couple of ways (tip control and line vise). The Anchor Line can be secured to your person via a belt mount, which should adapt well to PALS webbing, lanyard hole or threaded pin.

If you are a fisherman, I highly recommend you check out the whole line once it hits the market.

www.gerbergear.com

TacJobs – Website Coordinator / Office Assistant at US Tactical Supply

Friday, July 28th, 2017

Website Coordinator / Office Assistant
Part-time job

We are looking for a creative and computer savvy individual to work on a variety of projects including website maintenance, graphic design projects, and assist with eCommerce orders.

The ideal person for this job will have computer experience, attention to detail, and be a self-starter. Previous experience with graphics programs or eCommerce programs is a plus.

Visit www.indeed.com for more info.

U.S. Tactical Supply
939 Pacific Blvd SE
Albany, OR 97321
541-928-8645 PH
sales@ustacticalsupply.com

Team Wendy Part of Groundbreaking Research Grant on Traumatic Brain Injury

Friday, July 28th, 2017

Under the direction of researchers at Brown University, others from Drexel University, Sandia National Laboratory and Team Wendy are working together to study how Traumatic Brain Injuries form and developing new helmet technologies to counter them.

PROVIDENCE, R.I. [Brown University] — With a new $4.75 million grant from the Office of Naval Research, a team of scientists aims to develop new insights into how traumatic injuries form in the brain and develop new helmet technologies to help prevent them.

"The helmets used today on the battlefield and on playing fields are tested against a standard developed in late seventies to prevent skull fractures," said Christian Franck, the grant's principal investigator and an associate professor in Brown's School of Engineering. "We want to update that standard to assess how well a helmet protects the soft tissue inside the skull–the brain–and ultimately develop a prototype helmet that meets our new standard."

Accomplishing that will require a comprehensive, multi-level understanding of how forces are transmitted from a helmet to the skull, from the skull through the brain and ultimately to the individual neural cells that are damaged during traumatic brain injury (TBI).

(A device developed by Brown University researchers can deliver compressive impacts to 3-D cultures of brain cells and monitor how the cells react to that trauma in real time. The device could help scientists better understand how traumatic brain injury occurs at the cellular level. photo by: Nick Dentamaro / Brown University)

Franck will work with Brown colleagues Diane Hoffman-Kim and Haneesh Kesari, as well as researchers from Drexel University, Sandia National Laboratory and Team Wendy, a manufacturer of helmets and helmet liners.

Franck's lab at Brown has developed a novel technique for measuring the effects of traumatic forces on individual neurons. Most previous research on TBI at the cellular level has been done on two-dimensional petri dishes, but Franck uses a custom-built device that can apply compressive forces to neurons inside three-dimensional cell cultures, while using a powerful microscope to continuously monitor changes in cell structure. Franck has already used the system to gain new insights into how cells respond to traumatic strain. With is new grant, he plans to establish precise force thresholds for the onset of cellular injury.

"We want to know how much force inside the brain is too much for cells," Franck said. "That gives us a baseline for understanding exactly what kinds of forces are involved in TBI at the cellular level."

The lab of Hoffman-Kim, an associate professor of medical science and of engineering at Brown, works with mini-brains, or neuron bundles that model basic properties of living brains. The mini-brains offer a more complex cell culture than those Franck has worked with previously, which enables the researchers to better recreate the actual brain environment in which neurons operate.

The information gleaned from the cellular level will be combined with results of studies designed to better understand the forces on a helmeted head generated by typical blunt impacts and blast waves. To do that, the research team will work with Team Wendy to develop a sensor system that can be fitted to existing helmets used in combat and athletics. In 2013, Franck and Team Wendy developed a simple but fully functional impact acceleration measuring combat helmet system, which served as a proof of principle for the current grant.

The team will build upon that initial sensor design, then they'll use facilities at Drexel and Team Wendy to test the response of helmets to a wide variety of forces, and how those forces are transmitted to the skull.

To complete the picture of how forces transmitted by a helmet are distributed through the brain to individual cells, Franck will work with researchers at Sandia National Laboratory. The Sandia team who has developed models of the head and neck based on thousands of CT scans. Those models are able to provide insights into how forces are transmitted through soft tissue.

"We want put all these pieces together from the macroscopic level of helmets to the microscopic level of cells to get a complete picture of how these injuries occur," Franck said. "Once we have that, we can start to think about new methods of diagnosis and prevention."

Based on the injury model developed during this project, the researchers aim to deploy a version of their sensor system in combat theaters and playing fields.

"The idea is that when someone experiences a blow to the head, the helmet transmits the force data to a computer," Franck said. "A first responder could then look at that data and determine if TBI is likely and how severe it might be."

Ultimately, the team hopes the data generated by the research can be used to devise a new testing standard for helmets and a new helmet prototype. In developing the prototype, Franck will work closely with Team Wendy and his colleague in the School of Engineering, Haseesh Kesari, who studies the mechanical properties of solid materials.

"What's exciting to me about this is that it spans the microscale to macroscale," Franck said. "We're not aware of any other project that has taken such a comprehensive and tightly integrated approach to understanding how to better prevent these kinds of injuries."