FirstSpear®, Tubes™ are trademarks of FirstSpear, LLC. Products shown with these trademarks are built with FirstSpear Technology™
Now available with FirstSpear Tubes or ROC buckle. With laser cut GRID or Molle webbing.
Features:
Dimension:
Total length 35″ +/- 8″ (for elastic adjustment), Dimension 6.75″x 17.5″. Fits carriers with back flap 7″
Check out the Retro-kits – Beez Combat Systems Retro-Kit Cummerbunds
www.beezcombatsystems.com/main
Offered in 70 liter and 105 liter, the new Adventure Duffel from Kryptek is available in any color you want, as long as it’s Typhon camouflage.
Features:
? 600D Poly/PVC laminated shell
? Adjustable compression straps
? Water-resistance ID pocket on top
? Separate zippered compartment for wet/dry items
? Dual purpose padded handles for hand carry or backpack carry
? Large U-shaped YKK zipper opening for full access
? Interior zippered mesh accessory pocket
? 70L Dimensions: 13.98” x 25.4” x 13.98”
? 105L Dimensions: 28”x 15.75” x 15.75”
Lead Faucet Tactical Founder Dan Brokos has teamed up with Armageddon Gear to release three new nylon products. As with all things by Armageddon Gear, the LFT items are Made in the USA!
Dan originated the Brokos Belt and they’ve been made by a few companies over the years. But in this case, he has modernized the design for this new version from Armageddon Gear.
It’s only 3” wide and incorporates laser cut PALS compatible slots. Designed to work as either a standalone piece using the Tweave-covered padded liner belt (included) or in conjunction with the Velcro loop-faced inner belt, the Armageddon Gear Brokos Belt is lined with hook Velcro for stability. The polymer-reinforced outer belt is covered in a laser-cut Cordura laminate material that is segmented for use with belt-mounted holsters and other gear.
Package Contains:
LFT Armageddon Gear Brokos Outer Belt
LFT Armageddon Gear Brokos Inner Belt
LFT Armageddon Gear Brokos Padded Liner Belt
A pistol belt (sold separately) is required to complete your belt rig.
Available in Black and MultiCam, sizes Med-2XLarge.
The Dump Pouch is a great compliment to the Brokos Belt. Constructed of Mesh, it features a top opening reinforced with rigid scuba webbing liner to ensure the mouth of the pouch stays open.
PALS compatible, it can be rolled closed when not needed. Available in Coyote.
Last, but not least is a new sling. This 2-Point Sling is easily adjustable and ultralightweight, made from Hypalon, Nylon and Tweave. In fact, Armageddon Gear says the material is so light and pliable the rolled-up sling almost fits in a damn can of Copenhagen. Available in MultiCam.
Earlier today, Triple Aught Design launched their Nexus Belt, which has been under development for three years. It is a Foundry project which is their forge for special fabrications, unique colorways, and product experiments.
Designed to worn under a pack harness, duty belt or harness, this 1.5& wide belt is made from Nylon webbing, Biothane and Steel hardware.
Available in Black or Coyote, sizes 28-44.
tripleaughtdesign.com/shop/nexus-belt
The Lunchbox pouch is a versatile breaching pouch. It was created with exclusive input from the Direct Action Resource Center (DARC), located in Arkansas. DARC is a premiere tactics and training center with the leading breaching program in the country. Their instructors have ages of practical real world experience in explosive breaching, both the military and law enforcement realms. Spiritus Systems worked closely with DARC and applied this first hand knowledge to create a product specifically for the explosive breaching community. The Lunch Box mates well with the DARC breaching curriculum and theory and is available for use in DARC breaching courses.
Larger than it’s little brother the S.A.C.K Pouch, The Lunchbox was designed to carry large and bulky items with ease. For breachers the pouch is incredibly versatile, allowing the to carry an array of charges onto the objective in a clean and easy to reach package. It also consolidates charges inside of your explosive safe so that they can be accessed at a moments notice and mounted quickly to your plate carrier.
The lunchbox can accommodate multiple Roll-Ups, two 8″x 8″ Pucks or even a firehose charge. The back side of the pouch features 5 rows of elastic loops. These loops can be used to secure multiple Interior Door Charges for easy access.
The pouch features 2 elastic shock cord loops and toggles that allow the pouch to be rolled up and stored in a low profile when not in use. This makes it a great pouch for assaulters who may need to conduct Tactical Site Exploitations or carry extra breaching equipment for the breaching cell.
The pouch features a half zip design, which means that your equipment will not easily fall out of the pouch even if the zipper is left unsecured.
The front of the pouch features a zippered stash pocket that is constructed using a durable 4 way stretch material and is perfect for stashing small items like det cord remnants or firing device plungers The stretch material keeps those items snug and in place. It also allows the pouch to expand if you must stuff oversized items into it.
The inside features soft loop Velcro on both sides. This makes the Lunchbox very dynamic, giving you the ability to use our Velcro Insert Suite to organize mission essential equipment. It also features two slide-locks that make it easy to adjust the tension of the elastic loops hanging below, as well as two tie-down loops for securing sensitive equipment. The two grommet holes on the bottom aid with drainage of the pouch, if submersion occurs.
The Lunchbox is designed to fit onto the bottom of our Micro Fight Chest Rig, or plate carrier or rig that accommodates standard hook and loop, making it a versatile choice for those changing load-outs often. Simply pull this off one kit and add it to another.
The bottom of the pouch features two elastic loops that can be adjusted to hold a tourniquet or other equipment that you may need to rapidly deploy. If bottom carry doesn’t fit your mission needs, you can easily remove and reinstall the loops as necessary.
Petzl developed this adjustable helo tether for military applications, and will release it very soon.
It’s adjustable at the working end and easy to attach and detach from the first line belt as well as the aircraft’s hardpoint. Please not, this is not the final production version, which will incorporate hardware in one solid color.
Back Bay USA showed me their new Magazine Pouch for 2 30 RD M4 magazines which doubles duty as a carrier for the AN/PRC-152 radio.
Manufactured from laser cut DSM material, it features an internal divider.
The magazine divider lays flat at the rear of the pouch when used to carry a radio.
Available soon in MultiCam, Coyote, Ranger Green and OD from www.backbay-USA.com.
The Nonel Bag is designed to support easy access to traditional non-electric breaching tube while keeping it readily stored to prevent tangling or twisting. The bag’s patented design allows the user to neatly coil up to 200’ of non-electric breaching tube and quickly deploy it when at a breach point. The bag comes with a pocket designed to carry most common blasting machines and M81/M60 fuze ignitors. It is covered by US Patent 8123027B2.
Features:
• Upper section holds blasting caps and det-cord loop
• Exit hole at the bottom of the bag for feeding firing end into the outer pocket with igniters
• Made in the USA
